- Acoustic Principle: Pressure gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 0.50″
- Address Type: End
- Frequency Range: 40Hz – 20kHz (selectable high-pass filter @ 80Hz)
- Output Impedance: 200Ω
- Maximum SPL: 142dB SPL
- Maximum Output Level: 9.2mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity: -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-Weighted): 21dBA
- Power Requirements: 9V battery, P24 or P48
- Output Connection: XLR
Microphones, Pro Audio
Compare
RODE M3 Versatile End-address Condenser Microphone
5,775 EGP
The M3 highly versatile end-address condenser microphone is designed to excel in a wide variety of recording situations in the studio, on stage or on location. Featuring an internally shock-mounted 1/2-inch condenser capsule, the M3 can either be powered by P48 phantom power or an internal 9V battery. It offers the versatility of a selectable pad (-10dB, -20dB) and high-pass filter (80Hz), making it ideal for recording everything from electric guitar to vocals to drums.
Based on 0 reviews
Be the first to review “RODE M3 Versatile End-address Condenser Microphone”
Related products
-
Pro Audio, Loudspeakers
LC3-UC06 – Ceiling loudspeaker, 6W
The LC3-UC06 Ceiling loudspeaker is an affordable, all-purpose 6 W ceiling loudspeaker that may be powered by 3, 6, or 1.5 Watts and is compatible with a 100 V supply.
Key features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Optional back-box
- Unobtrusive design
A low impedance (4 Ohm) variant of the ceiling loudspeaker, the LC3-UC06-LZ, may be connected directly to the output of a low impedance amplifier.
The optional back-box LC3-CBB completely shields the loudspeaker from dust and falling items, and it also stops sound from entering adjacent spaces through the ceiling hollow.
As per UL 94V0, the LC3-UC06 Ceiling loudspeaker frame, grill, and back-box are made of self-extinguishing ABS.
Installation
With built-in spring arms that firmly hold the ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
Flying leads are used for the electrical connection, with each hue linked to a separate primary tap on the corresponding transformer. The matching transformer has three primary taps for 100 V, allowing for the selection of nominal full, half, and quarter power.
The optional back-box (LC3-CBB) keeps the loudspeaker safe from dust and falling debris, makes it pest-proof, and stops sound from entering adjacent spaces through the ceiling hollow.
Check out LC3 Ceiling loudspeaker Price.
Certification
The LC3-UC06 Ceiling loudspeaker is built to meet IEC 268‑5 Power Handling Capacity (PHC) specifications, which require them to operate at full power for 100 consecutive hours.
Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees enhanced dependability in harsh circumstances, resulting in increased customer satisfaction, an extended operational lifespan, and a decreased likelihood of malfunction or decline in performance.
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0017 -
Pro Audio, Loudspeakers
LC5-WC06E4 – Ceiling loudspeaker, 6W, ABS, 2″
The LC5-WC06E4 Ceiling loudspeaker is an extreme compact ceiling loudspeaker, suitable for speech and background music reproduction.
Key Features
- Suitable for speech and music reproduction
- Extreme compact size
- Suitable for use in humidity-, chlorine- and salty environments
- Selectable 70 V ,100 V and 8 Ohm input
- EN 54‑24 certified
Design
The design of the front grille perfectly matches with current available recessed luminaires, integrating light and sound.
The optional back‑box LC5‑CBB fully protects the rear of the loudspeaker from dust and dripping water from above, making the combination IP 44 protected.
The loudspeaker frame, grille and back‑box are manufactured from self‑extinguishing ABS according to UL 94 V 0.
Usage
This LC5-WC06E4 Ceiling loudspeaker is suitable for use in low ceiling applications with low noise level. The small driver used in the unit stands for delivering good sound quality from a small sized unit and provides a wide opening angle for the important frequency octaves.
Fewer loudspeakers are needed to cover a given area, and the noticeable “fading” that occurs as a listener walks from one loudspeaker to another area is eliminated.
The LC5 Ceiling loudspeaker ABS, 2 (with an assembled back‑box) is suitable for use in humidity-, chlorine- and salty environments.
See our LC5 Ceiling loudspeaker Price.
Installation
Installation is easy with two integral leaf springs that securely hold the loudspeaker in its cut‑out. The integral leaf springs can be adjusted in three positions to accommodate ceiling thicknesses from 5 mm to 25 mm.
The size of the ceiling cut‑out opening is standardized on available 3” (76.2 mm) cutting hole saws. No tool required for fitting the loudspeaker into the ceiling cut‑out.
The loudspeaker has built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected.
In this way, system integrity is maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation.
The LC5-WC06E4 Ceiling loudspeaker has ceramic screw‑terminal connection blocks, thermal fuse and heat-resistant high temperature wiring.
Buy LC5 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0018 -
Pro Audio, Loudspeakers
LBC3095/15 – Pendant sphere loudspeaker, 10W
The LBC Pendant sphere loudspeaker is intended to hang from the ceiling with its attached wire. The lovely form and subdued hue of the pendant sphere mimic intriguing architectural elements on their own.
Key Features
- Suitable for speech and music reproduction
- Simple power setting
- 5 m fixed connection cable
- Water and dust protected
- Robust self-extinguishing ABS enclosure to UL 94 V0
- Complies with international installation and safety regulations
Notes regarding installation and setup
LBC3095/15 Pendant sphere loudspeaker comes with a four-core connection cable that is color-coded, with each color corresponding to a different primary tap on the matching 100 V transformer. This enables the selection of nominal full-power, half-power, or quarter-power radiation in steps of three decibels.
Functions
The pendant sphere is designed to be used outdoors and in high humidity environments, such as swimming pools, as it is splash waterproof. Its excellent sound spread makes it perfect for buildings with high ceilings, like hypermarkets and superstores.
The enclosures are made from high-impact self-extinguishing ABS (according to class UL 94 V0) and are white in color.
The pendant sphere is meant to be suspended from its color-matched connecting cable, which can be easily shortened for the desired height. A cable clamp and ceiling cover are included. However, it is not recommended for use in windy environments.
See our LBC Pendant sphere loudspeaker Price
Certifications and approvals
Bosch loudspeakers are engineered to endure continuous operation at their specified power for 100 hours, following the IEC 268-5 Power Handling Capacity (PHC) standards.
Additionally, Bosch has devised the Simulated Acoustical Feedback Exposure (SAFE) test to prove their ability to withstand double their rated power for brief periods.
This guarantees enhanced dependability in challenging environments, resulting in increased customer contentment, extended lifespan, and significantly reduced risk of malfunction or decline in performance.
Buy LBC Pendant sphere loudspeaker 10W from OmniSignals now!
SKU: #0030 -
Pro Audio, Loudspeakers
LC1-UM12E8 – Ceiling loudspeaker, 12W, coaxial
LC1-UM12E8 ceiling loudspeaker, 12 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- superb audio quality for both talking and music
- One grille size and one whole set of accessories make installation simple
- options for various ceiling mounting techniques
- Pilot Tone indicator that is optional
- UL2043, UL1480, and EN 54-24 certified
System Overview
Numerous ceiling situations are suitable for the LC1 Modular Ceiling Loudspeaker series. They offer top-notch music and voice for indoor public address applications. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction.
The LC1-MFD or LC1-MFDS enclosure may be used to mount the loudspeaker, which are appropriate for usage in areas where air is handled. The DC-blocking board PM1-LISD and optional monitoring board PRA-EOL can be mounted within the enclosure of the loudspeaker frame.
Check out the LC1 ceiling loudspeaker price.
Functions
Voice alarm applications
Voice alarm loudspeakers are made expressly to be used in buildings where rules control the verbal evacuation notification system’s functioning. The LC1 Modular Ceiling Loudspeaker series complies with British standard BS 5839–8 and is approved EN 54–24 for use in voice alarm systems.
Buy LC1 Ceiling loudspeaker, 12W from OmniSignals now!
Protection
In order to prevent connected circuit failure due to fire damage to the loudspeaker, the loudspeaker is equipped with built-in protection. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeaker in other locations.
To further strengthen the safety of the cable termination, the LC1-UM12E8 ceiling loudspeaker can also be utilized in conjunction with a metal fire-dome.
Connections
The LC1-UM12E8 ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Installation/configuration notes
The LC1 ceiling loudspeaker coaxial range is designed with ease of installation in mind, ensuring a user-friendly experience for seamless integration into diverse environments. The loudspeaker consists of a frame with the loudspeaker driver and metal or ABS grille with integrated light conductor, matching transformer and ceramic screw terminal connection block.
On the loudspeaker are provisions for mounting the optional end-of-line surveillance board and optional DC-blocking board. Power tapping on the 70 V / 100 V matching transformer allows selection of full-power, half power, quarter-power and eight-power radiation.
SKU: #0012
There are no reviews yet.