- Acoustic Principle: Pressure gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 0.50″
- Address Type: End
- Frequency Range: 40Hz – 20kHz (selectable high-pass filter @ 80Hz)
- Output Impedance: 200Ω
- Maximum SPL: 142dB SPL
- Maximum Output Level: 9.2mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity: -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-Weighted): 21dBA
- Power Requirements: 9V battery, P24 or P48
- Output Connection: XLR
Microphones, Pro Audio
Compare
RODE M3 Versatile End-address Condenser Microphone
5,775 EGP
The M3 highly versatile end-address condenser microphone is designed to excel in a wide variety of recording situations in the studio, on stage or on location. Featuring an internally shock-mounted 1/2-inch condenser capsule, the M3 can either be powered by P48 phantom power or an internal 9V battery. It offers the versatility of a selectable pad (-10dB, -20dB) and high-pass filter (80Hz), making it ideal for recording everything from electric guitar to vocals to drums.
Based on 0 reviews
Be the first to review “RODE M3 Versatile End-address Condenser Microphone”
Related products
-
Pro Audio, Loudspeakers
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
SKU: #0016 -
Pro Audio, Loudspeakers
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
SKU: #0015 -
Pro Audio, Loudspeakers
Bosch LBC 3483/00 Horn Loudspeaker, 35W
High-efficiency Bosch LBC Horn Loudspeaker 35W offers superior sound dispersion and speech reproduction for a variety of outdoor applications. They are perfect for industries, parks, swimming pools, sports fields, and exhibition spaces.
Key Features
- High efficiency driver
- Excellent speech reproduction
- Provision for inside mounting of the optional line/loudspeaker supervision board
- Water-and dust protected to IP 65
- EN 54‑24 certified
- BS 5839‑8 and EN 60849 compliant
loudspeaker for voice alarm
The LBC 3483/00 complies with emergency requirements and is intended for usage in voice alarm systems.In the case of a fire, the built-in protection of the horn loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations. The Horn loudspeaker boasts heat-resistant, high-temperature wire, a ceramic terminal block, and a thermal fuse.
We offer all Bosch LBC Horn Loudspeaker parts.
Functions
Self-extinguishing ABS is used to make the horn’s rear cover (according to class UL 94 V0). The connecting cable exits the back cover through a cable gland (PG 13.5). The back cover has a second hole installed for a loop through connection (covered as usual provided).
These integrated horns may also be installed with any combination of horn and driver because they are available as separate horn and driver. Refer to the order details for the type numbers.
Buy Bosch LBC Horn Loudspeaker from OmniSignals now!
Certifications and approvals
Bosch LBC Horn Loudspeaker 35W is made to meet IEC 268-5 Power Handling Capacity (PHC) regulations, which require them to be able to operate at full power for 100 hours. Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees increased dependability in harsh environments, resulting in increased customer satisfaction, an extended operational life, and a far lower likelihood of failure or performance degradation.
Check out Bosch LBC Horn Loudspeaker 35W price.
SKU: #0027 -
Pro Audio, Loudspeakers
Bosch LBC 3484/00 Horn Loudspeaker, 50W
The Bosch LBC Horn Loudspeaker 50W is a circular loudspeaker with a 50 W horn that has a diameter of 490 mm (19.6 in). It is constructed of aluminum. For protection against impact damage, a PVC profile covers the horn’s edges. It is dust and water resistant and light gray (RAL 7035).
Key Features
- High efficiency driver
- Excellent speech reproduction
- Provision for inside mounting of the optional line/loudspeaker supervision board
- Water-and dust protected to IP 65
- BS 5839‑8 and EN 60849 compliant
Easy Power Configuration
A three-way terminal block with a screw connection (including earth) is included on the horn. The matching transformer has three primary taps that allow you to pick nominal full-power, half-power, or quarter-power radiation (in steps of three dB).
We offer all Bosch LBC Horn Loudspeaker parts.
Mounting
Accurate direction of the sound beam is made possible by the robust adjustable steel mounting brackets that come with the horn loudspeakers.
Buy Bosch LBC Horn Loudspeaker from OmniSignals now!
Functions
Self-extinguishing ABS is used to make the horn’s rear cover (according to class UL 94 V0). The connecting cable exits the back cover through a cable gland (PG 13.5). The back cover has a second hole installed for a loop through connection (covered as usual provided).
These integrated horns may also be installed with any combination of horn and driver because they are available as separate horn and driver. Refer to the order details for the type numbers.
See Bosch LBC Horn Loudspeaker 50W price.
Approvals and certifications
Bosch LBC Horn Loudspeaker 50W is made to meet IEC 268-5 Power Handling Capacity (PHC) regulations, which require them to be able to operate at full power for 100 hours. Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees increased dependability in harsh environments, resulting in increased customer satisfaction, an extended operational life, and a far lower likelihood of failure or performance degradation.
SKU: #0028
There are no reviews yet.