- Acoustic Principle: Pressure gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 0.50″
- Address Type: End
- Frequency Range: 40Hz – 20kHz (selectable high-pass filter @ 80Hz)
- Output Impedance: 200Ω
- Maximum SPL: 142dB SPL
- Maximum Output Level: 9.2mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity: -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-Weighted): 21dBA
- Power Requirements: 9V battery, P24 or P48
- Output Connection: XLR
Microphones, Pro Audio
Compare
RODE M3 Versatile End-address Condenser Microphone
5,775 EGP
The M3 highly versatile end-address condenser microphone is designed to excel in a wide variety of recording situations in the studio, on stage or on location. Featuring an internally shock-mounted 1/2-inch condenser capsule, the M3 can either be powered by P48 phantom power or an internal 9V battery. It offers the versatility of a selectable pad (-10dB, -20dB) and high-pass filter (80Hz), making it ideal for recording everything from electric guitar to vocals to drums.
Based on 0 reviews
Be the first to review “RODE M3 Versatile End-address Condenser Microphone”
Related products
-
Pro Audio, Loudspeakers
LC3-UC06E – Ceiling loudspeaker, 6W, spring arms
The LC3-UC06E Ceiling loudspeaker is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt.
Key Features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Unobtrusive design
- EN 54‑24 certified
The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The LC3 Ceiling loudspeaker spring arms, frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.
Check out LC3 Ceiling loudspeaker Price.
Installation and Setup
With built-in spring arms that firmly hold the LC3-UC06E Ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
The LC3-UC06E Ceiling loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
The loudspeaker is equipped with heat-resistant high temperature wire, a thermal fuse, and a ceramic screw-terminal connecting block. holes (11 mm) for two cable glands (20.5 mm) and two rubber grommets (standard provided).
Four primary taps for 100 V are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power and one‑eighth‑power.
The optional back‑box (LC3‑CBB) protects the rear of the loudspeaker from dust, falling objects, makes the unit vermin proof and prevents sound traveling via the ceiling cavity to adjacent areas.
The back‑box is assembled with the loudspeaker by means of a snap‑in construction and has knock‑out holes (11 mm) for two rubber grommets (standard supplied) and for two cable glands (20.5 mm).
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0022 -
Pro Audio, Loudspeakers
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
SKU: #0015 -
Pro Audio, Loudspeakers
LC5-WC06E4 – Ceiling loudspeaker, 6W, ABS, 2″
The LC5-WC06E4 Ceiling loudspeaker is an extreme compact ceiling loudspeaker, suitable for speech and background music reproduction.
Key Features
- Suitable for speech and music reproduction
- Extreme compact size
- Suitable for use in humidity-, chlorine- and salty environments
- Selectable 70 V ,100 V and 8 Ohm input
- EN 54‑24 certified
Design
The design of the front grille perfectly matches with current available recessed luminaires, integrating light and sound.
The optional back‑box LC5‑CBB fully protects the rear of the loudspeaker from dust and dripping water from above, making the combination IP 44 protected.
The loudspeaker frame, grille and back‑box are manufactured from self‑extinguishing ABS according to UL 94 V 0.
Usage
This LC5-WC06E4 Ceiling loudspeaker is suitable for use in low ceiling applications with low noise level. The small driver used in the unit stands for delivering good sound quality from a small sized unit and provides a wide opening angle for the important frequency octaves.
Fewer loudspeakers are needed to cover a given area, and the noticeable “fading” that occurs as a listener walks from one loudspeaker to another area is eliminated.
The LC5 Ceiling loudspeaker ABS, 2 (with an assembled back‑box) is suitable for use in humidity-, chlorine- and salty environments.
See our LC5 Ceiling loudspeaker Price.
Installation
Installation is easy with two integral leaf springs that securely hold the loudspeaker in its cut‑out. The integral leaf springs can be adjusted in three positions to accommodate ceiling thicknesses from 5 mm to 25 mm.
The size of the ceiling cut‑out opening is standardized on available 3” (76.2 mm) cutting hole saws. No tool required for fitting the loudspeaker into the ceiling cut‑out.
The loudspeaker has built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected.
In this way, system integrity is maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation.
The LC5-WC06E4 Ceiling loudspeaker has ceramic screw‑terminal connection blocks, thermal fuse and heat-resistant high temperature wiring.
Buy LC5 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0018 -
Pro Audio, Loudspeakers
LC1-WM06E8 – Ceiling loudspeaker, 6W, metal, 4″
LC1-WM06E8 Ceiling loudspeaker, 6 W, integrated circular metal grille, 4-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Numerous ceiling situations may be utilized with the Bosch LC1-WM06E8 Loudspeaker series. They deliver high-quality music and voice for indoor public address systems. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction. It has two very effective 12W and 24W coaxial loudspeaker drivers in addition to three 6W single cone loudspeakers with adjustable opening angles.
They may all be used with the same mounting accessories and have the same grille size. When fitted with the LC1-MFD enclosure, the Bosch LC1-WM06E8 Ceiling Loudspeakers are appropriate for use in air-handling rooms.
Check out LC1 Ceiling loudspeaker Price.
The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board. They may all be used with the same mounting accessories and have the same grille size.
When fitted with the LC1-MFD enclosure, the LC1 Ceiling loudspeaker metal is appropriate for use in air-handling rooms. The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board.
Buy LC1 Ceiling loudspeaker, 6W from our store now!
SKU: #0020
There are no reviews yet.