- Acoustic Principle: Pressure gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 0.50″
- Polar Pattern: Supercardioid
- Address Type: End
- Frequency Range: 35Hz – 20kHz
- Output Impedance: 50Ω
- Maximum SPL: 141dB SPL
- Maximum Output Level: 5.2mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity: -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-Weighted): 23dBA
- Power Requirements: P24 or P48
- Output Connection: XLR
Microphones, Pro Audio
Compare
RODE M2 Live Performance Condenser Microphone
5,515 EGP
The M2 is a rugged condenser microphone that is designed for the ultimate in performance for live vocals. Featuring an internally shock-mounted ½-inch condenser capsule, it delivers a full frequency response for exceptionally detailed voice reproduction on stage and its tight supercardioid polar pattern ensures a focused sound that minimises spill and feedback. The M2 also features a lockable on/off switch for added versatility.
Based on 0 reviews
Be the first to review “RODE M2 Live Performance Condenser Microphone”
Related products
-
Pro Audio, Loudspeakers
LC3-UC06 – Ceiling loudspeaker, 6W
The LC3-UC06 Ceiling loudspeaker is an affordable, all-purpose 6 W ceiling loudspeaker that may be powered by 3, 6, or 1.5 Watts and is compatible with a 100 V supply.
Key features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Optional back-box
- Unobtrusive design
A low impedance (4 Ohm) variant of the ceiling loudspeaker, the LC3-UC06-LZ, may be connected directly to the output of a low impedance amplifier.
The optional back-box LC3-CBB completely shields the loudspeaker from dust and falling items, and it also stops sound from entering adjacent spaces through the ceiling hollow.
As per UL 94V0, the LC3-UC06 Ceiling loudspeaker frame, grill, and back-box are made of self-extinguishing ABS.
Installation
With built-in spring arms that firmly hold the ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
Flying leads are used for the electrical connection, with each hue linked to a separate primary tap on the corresponding transformer. The matching transformer has three primary taps for 100 V, allowing for the selection of nominal full, half, and quarter power.
The optional back-box (LC3-CBB) keeps the loudspeaker safe from dust and falling debris, makes it pest-proof, and stops sound from entering adjacent spaces through the ceiling hollow.
Check out LC3 Ceiling loudspeaker Price.
Certification
The LC3-UC06 Ceiling loudspeaker is built to meet IEC 268‑5 Power Handling Capacity (PHC) specifications, which require them to operate at full power for 100 consecutive hours.
Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees enhanced dependability in harsh circumstances, resulting in increased customer satisfaction, an extended operational lifespan, and a decreased likelihood of malfunction or decline in performance.
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0017 -
Pro Audio, Loudspeakers
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
SKU: #0015 -
Pro Audio, Loudspeakers
LBC3095/15 – Pendant sphere loudspeaker, 10W
The LBC Pendant sphere loudspeaker is intended to hang from the ceiling with its attached wire. The lovely form and subdued hue of the pendant sphere mimic intriguing architectural elements on their own.
Key Features
- Suitable for speech and music reproduction
- Simple power setting
- 5 m fixed connection cable
- Water and dust protected
- Robust self-extinguishing ABS enclosure to UL 94 V0
- Complies with international installation and safety regulations
Notes regarding installation and setup
LBC3095/15 Pendant sphere loudspeaker comes with a four-core connection cable that is color-coded, with each color corresponding to a different primary tap on the matching 100 V transformer. This enables the selection of nominal full-power, half-power, or quarter-power radiation in steps of three decibels.
Functions
The pendant sphere is designed to be used outdoors and in high humidity environments, such as swimming pools, as it is splash waterproof. Its excellent sound spread makes it perfect for buildings with high ceilings, like hypermarkets and superstores.
The enclosures are made from high-impact self-extinguishing ABS (according to class UL 94 V0) and are white in color.
The pendant sphere is meant to be suspended from its color-matched connecting cable, which can be easily shortened for the desired height. A cable clamp and ceiling cover are included. However, it is not recommended for use in windy environments.
See our LBC Pendant sphere loudspeaker Price
Certifications and approvals
Bosch loudspeakers are engineered to endure continuous operation at their specified power for 100 hours, following the IEC 268-5 Power Handling Capacity (PHC) standards.
Additionally, Bosch has devised the Simulated Acoustical Feedback Exposure (SAFE) test to prove their ability to withstand double their rated power for brief periods.
This guarantees enhanced dependability in challenging environments, resulting in increased customer contentment, extended lifespan, and significantly reduced risk of malfunction or decline in performance.
Buy LBC Pendant sphere loudspeaker 10W from OmniSignals now!
SKU: #0030 -
Pro Audio, Loudspeakers
LC1-UM06E8 – Ceiling loudspeaker, 6W, metal
The LC1-UM06E8 Ceiling loudspeaker range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Protection
The LC1-UM06E8 Ceiling loudspeaker has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
Check out the LC1 ceiling loudspeaker price.
Connections
The loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Buy LC1 ceiling loudspeaker, 6W now!
More Information
Ceiling loudspeaker, 6 W, integrated circular metal grille, 6-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
The loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
See our LC1 ceiling loudspeaker metal.
SKU: #0019
There are no reviews yet.