- Acoustic Principle: Pressure gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 0.50″
- Polar Pattern: Supercardioid
- Address Type: End
- Frequency Range: 35Hz – 20kHz
- Output Impedance: 50Ω
- Maximum SPL: 141dB SPL
- Maximum Output Level: 5.2mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity: -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-Weighted): 23dBA
- Power Requirements: P24 or P48
- Output Connection: XLR
Microphones, Pro Audio
Compare
RODE M2 Live Performance Condenser Microphone
5,515 EGP
The M2 is a rugged condenser microphone that is designed for the ultimate in performance for live vocals. Featuring an internally shock-mounted ½-inch condenser capsule, it delivers a full frequency response for exceptionally detailed voice reproduction on stage and its tight supercardioid polar pattern ensures a focused sound that minimises spill and feedback. The M2 also features a lockable on/off switch for added versatility.
Related products
-
Loudspeakers, Pro Audio
LC1-UM24E8 – Ceiling loudspeaker, 24W, coaxial
LC1-UM24E8 ceiling loudspeaker, 24 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Modular Range
The LC1 ceiling loudspeaker coaxial range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
The LC1-UM24E8 ceiling loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
Buy LC1 Ceiling loudspeaker, 24W from OmniSignals now!
Functions
Voice alarm applications
Voice alarm loudspeakers are specifically designed for use in buildings where system performance for verbal evacuation announcements is governed by regulations. The LC1 Modular Ceiling Loudspeaker range is designed for use in voice alarm systems and is EN 54‑24 certified and compliant with British standard BS 5839‑8.
Protection
The LC1-UM24E8 has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
Connections
The LC1-UM24E8 Ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Check out our LC1 Ceiling Loudspeaker Price.
SKU: #0014 -
Loudspeakers, Pro Audio
LC3-UC06E – Ceiling loudspeaker, 6W, spring arms
The LC3-UC06E Ceiling loudspeaker is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt.
Key Features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Unobtrusive design
- EN 54‑24 certified
The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The LC3 Ceiling loudspeaker spring arms, frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.
Check out LC3 Ceiling loudspeaker Price.
Installation and Setup
With built-in spring arms that firmly hold the LC3-UC06E Ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
The LC3-UC06E Ceiling loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
The loudspeaker is equipped with heat-resistant high temperature wire, a thermal fuse, and a ceramic screw-terminal connecting block. holes (11 mm) for two cable glands (20.5 mm) and two rubber grommets (standard provided).
Four primary taps for 100 V are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power and one‑eighth‑power.
The optional back‑box (LC3‑CBB) protects the rear of the loudspeaker from dust, falling objects, makes the unit vermin proof and prevents sound traveling via the ceiling cavity to adjacent areas.
The back‑box is assembled with the loudspeaker by means of a snap‑in construction and has knock‑out holes (11 mm) for two rubber grommets (standard supplied) and for two cable glands (20.5 mm).
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0022 -
Loudspeakers, Pro Audio
Bosch LBC 3484/00 Horn Loudspeaker, 50W
The Bosch LBC Horn Loudspeaker 50W is a circular loudspeaker with a 50 W horn that has a diameter of 490 mm (19.6 in). It is constructed of aluminum. For protection against impact damage, a PVC profile covers the horn’s edges. It is dust and water resistant and light gray (RAL 7035).
Key Features
- High efficiency driver
- Excellent speech reproduction
- Provision for inside mounting of the optional line/loudspeaker supervision board
- Water-and dust protected to IP 65
- BS 5839‑8 and EN 60849 compliant
Easy Power Configuration
A three-way terminal block with a screw connection (including earth) is included on the horn. The matching transformer has three primary taps that allow you to pick nominal full-power, half-power, or quarter-power radiation (in steps of three dB).
We offer all Bosch LBC Horn Loudspeaker parts.
Mounting
Accurate direction of the sound beam is made possible by the robust adjustable steel mounting brackets that come with the horn loudspeakers.
Buy Bosch LBC Horn Loudspeaker from OmniSignals now!
Functions
Self-extinguishing ABS is used to make the horn’s rear cover (according to class UL 94 V0). The connecting cable exits the back cover through a cable gland (PG 13.5). The back cover has a second hole installed for a loop through connection (covered as usual provided).
These integrated horns may also be installed with any combination of horn and driver because they are available as separate horn and driver. Refer to the order details for the type numbers.
See Bosch LBC Horn Loudspeaker 50W price.
Approvals and certifications
Bosch LBC Horn Loudspeaker 50W is made to meet IEC 268-5 Power Handling Capacity (PHC) regulations, which require them to be able to operate at full power for 100 hours. Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees increased dependability in harsh environments, resulting in increased customer satisfaction, an extended operational life, and a far lower likelihood of failure or performance degradation.
SKU: #0028 -
Pro Audio, Loudspeakers
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
SKU: #0016
There are no reviews yet.