Projection, Projectors
Compare
VEGA PM100180 CEILING MOUNT
Availability:
Out of stock
1,735 EGP
Out of stock
This projector mount is suitable for inclined or cathedral ceilings and can support projectors weighing up to 10kg.
The VEGA PM100180 ceiling mount has a unique ‘carousel’ mounting plate for universal compatibility and a ball joint adjustment for simple placement, resulting in a precisely aligned projection.
With a maximum ceiling drop of 830mm, a hand lever allows for easy drop adjustment once the mount is in position. Installation is straightforward, with all mounting gear and fittings included, including cover plates for a neat and clean finish.
Check out our ceiling projector mount price.
Key Features
- Designed to support LCD/LED/DLP projectors weighing up to 10kg.
- With +/-90° tilt, +/-90° roll, and 360° swivel, the projection may be exactly oriented.
- Unique ‘carousel’ mounting plate ensures global compatibility.
- The ball joint adjustment allows for convenient projector placement.
- Hand lever allows for easy adjustment of ceiling drop from 580mm to 830mm.
- Quick and simple installation.
- Cover plates are offered for a smart installation.
- Steel safety wire is incorporated for further security.
- Suitable for projectors with M2.5, M3, M4, M5, and M6 mounting options.
- All mounting hardware is provided.
Adjustable Length
Our Projector Mount Bracket has a unique adjustable length function that allows for the flexibility required in a variety of scenarios. With an astonishing range of 100 cm to 1.8 cm, this mount easily adapts to various areas, assuring a perfect fit for your unique requirements.
Buy Projector Mount PM100180 from OmniSignals now!
FAQ
Can all projectors be ceiling mounted?
While most projectors may be ceiling mounted it is critical to consult the manufacturer’s specs and limits, since certain projector models may require special mounts or are not built for ceiling suspension.
Should I mount my projector on the wall or ceiling?
Ceiling mounts are ideal for ceiling-mounted projector displays and bigger spaces, while wall mounts can accommodate heavier projector models.
How do you mount a projector on a high ceiling?
- Determine the Best Placement of Your Projector on Your Screen.
- Attach the mount to the projector.
- Attach the mount to the ceiling.
- Wiring Your Projector
- Aligning Your Projector
Related products
-
Projection, Projection Screens
Vega Aluminum Wall Mount Short Throw
- Telescopic boom 930-1530mm (center-of-projector to wall)
- Projector can be mounted at any point along boom
- Adjustable boom incline
With no additional parts needed, the Aluminum Wall Mount Short Throw is compatible with 99 percent of short-throw and ultra-short-throw projectors. It is a sturdy, adaptable mount that fastens projectors using Vision’s universal spider fitting.
Extended Boom
With a boom length of up to 1530mm, aluminum short throw projector wall mount can project images up to 2000mm wide. Anywhere along the boom is a suitable place to attach the spider.
Telescopic
The picture size may be easily adjusted thanks to the two-part boom. During assembly, cables are lowered down the pole. The pole that attaches to the wall bracket measures 800 mm (31.5 in), while the external pole measures 900 mm (35.4 in).
Gradient Adjustment
The installer may adjust the boom’s slope to counteract the weight of large projectors thanks to a flexible wall plate.
Projector Angle
Plenty of roll adjustment is possible with the TM-ST2. See our Vega Short Throw Projector Mount price.
Fine-tuning
The wall plate allows the installer to fine-tune the boom’s up-and-down and side-to-side adjustments.
Bit of Security
A unique hex key is needed to operate the pin-hex security bolts used by the TM-ST2. Using a power drill, Vision’s pin-hex drill bit facilitates speedy product assembly.
Installation by One Person
Because of its modular design, fitting is quick and easy. Simply secure the wall mount, slide the boom in, and fasten the projector.
Please take a moment to review our Aluminum Wall Mount Short Throw Specs below.
SKU: #0189 -
Projection, Projectors
VEGA PM4365 CEILING MOUNT
When selecting a stand projector ceiling mount, the Vega PM4365 ceiling mount is the ideal choice. Don’t second-guess your decision.
Key Features
- The product is made of imported steel, has an inner tube alignment design, and is matt spray treated. It is not only elegant and useful, but also simple to assemble.
- Retractable pitch with four claw feet, extremely compatible with most types.
- Including rotating angle, adjustable front and rear tilt, side leveling, and universal adjustment function.
- Demountable retractable boom with telescopic boom attached; boom in case not linked. Hanger length: 13 cm.
- Length that is 43–65 cm adjustable.
- For a floor of 2.6 to 3 meters.
- White in color.
- Maximum weight of load: 25 kg
Ceiling Projector Mount – PM Series
- Light: Aluminum Extension pole
- Rigid: Mounting bracket and legs are made of Cool Roll Steel
- Safe: Every interval can be secured by screw
- Adjustable: Pitch and Roll of projector are fully adjustable through the universal joint
- Heavy Duty: Max loading up to 15kg
Specifications
- Min. Length (L) / mm 440
- Max. Length (L) / mm 640
- Pole Material N.A. Aluminum
- Height / Length Adjustment Interval / mm 50
- Max. adjustable length / mm 200
- Product Dimension (LxWxH) / mm 667x280x102
- Max. mounting hole linear distance (L1) / mm 350
- Min. mounting hole linear distance (L1) / mm 95
- Pitch / ° ±22.5°
- Roll / ° ±15°
- Yaw / ° N.A.
- Max. loading / kg 15
- Inner Box Dimension / mm 315x110x55
- Net Weight per single unit / kg 1.30
- Gross Weight per single unit / kg 1.40
- Unit per outer carton / pcs 20
- Outer Carton Box Dimension / mm 465x335x305
- Gross Weight per Outer Carton Box / kg 29.80
- Full 20′ container load / pcs 11480
Buy projector mount PM4365 from our store now! We offer the best ceiling projector mount price.
SKU: #0188
There are no reviews yet.