| Audio system | |||
|---|---|---|---|
| Gain | Balanced output: 0 dB, unbalanced output: -6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.2 dB | ||
| THD + Noise | <0.02%, 20 Hz to 20 kHz, at maximum level | ||
| S/N | |||
| Analog In to Analog Out | >109 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted) | ||
| Analog In to Digital Out | 110 dB, 20 Hz to 20 kHz, at full-scale output (unweighted) | ||
| Digital In to Analog Out | 115 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted) | ||
| Crosstalk | <-90 dB @ 20 Hz to 20 kHz, fully loaded | ||
| Volume control | -100 dB to 0 dB (control 0 to 100 in 0.1 dB steps) | ||
| Audio input | |||
| Number/signal type | 6 mono (or 3 stereo), mic/line, balanced/unbalanced, 6 with phantom power | ||
| Connectors | (3) 3.5 mm captive screw, 6 pole, mono, balanced/unbalanced | ||
| Impedance | >10k ohms balanced/unbalanced | ||
| Nominal level | -60 dBV, +4 dBu, -10 dBV adjustable via input gain | ||
| Maximum level | +21 dBu at rated THD+N when mic gain is set to 0 dB | ||
| Equivalent input noise | <-120 dBV (1 µVrms) at 40 dB input gain | ||
| CMRR | >60 dB typical | ||
| Input gain adjustment | -18 dB to +80 dB in 0.1 dB steps, adjustable per input | ||
| DC phantom power | +48 VDC, ±10% (inputs 1-6) can be switched on or off per input | ||
| |||
| Audio output | |||
| Number/signal type | 4 mono (or 2 stereo), line, balanced/unbalanced | ||
| Connectors | (2) 3.5 mm captive screw, 6 pole, mono, balanced/unbalanced | ||
| Impedance | 100 ohms balanced, 50 ohms unbalanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+21 dBu balanced, >+15 dBu unbalanced | ||
| Audio processing | |||
| A/D, D/A conversion | 24-bit, 48 kHz | ||
| AEC tail length | >200 msec | ||
| AEC convergence | Up to 60 dB/sec | ||
| Noise cancellation | Up to 20 dB, software selectable | ||
| EXP port | |||
| Transmission type | Proprietary | ||
| Connector | 1 RJ-45 | ||
| Inputs | 16 channels Rx | ||
| Outputs | 16 channels Tx | ||
| Audio format | Uncompressed, 24-bit, 48 kHz | ||
| EXP cable | Shielded CAT6 up to 10 meters (1 foot cable included) | ||
| USB audio port | |||
| Connector | 1 rear panel USB mini-B | ||
| USB standards | USB 2.0, high speed | ||
| AT Ports (DMP 64 Plus AT models only) — audio transport | |||
| Transmission | Dante/AES-67, software selectable | ||
| Connectors | 2 RJ-45, 2-port 1 Gbps switch to Dante interface | ||
| Inputs | 32 channels Rx | ||
| Outputs | 16 channels Tx | ||
| Audio format | Uncompressed, 24-bit, 48 kHz | ||
| Latency | Deterministic, based on user selections: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms | ||
| VoIP Port (DMP 64 Plus V models only) | |||
| Connector | 1 RJ-45 | ||
| Data rate | 10/100/1000 Base-T | ||
| Signaling protocol | Session Initiation Protocol (SIP), RFC 3261 and related RFCs | ||
| Discovery protocol | LLDP-MED (optional) | ||
| Lines | Up to 8 concurrent, independent extensions | ||
| Codec support | Various ITU, including wideband | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.1.254 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off | ||
| Control/remote | |||
| Serial host control port | 1 bidirectional RS-232, 3.5 mm captive screw, 3 pole | ||
| Baud rate and protocol | 38400 baud, 8 data bits, 1 stop bit, no parity | ||
| Pin configuration | 1 = Tx, 2 = Rx, 3 = G | ||
| USB control port | 1 front panel USB mini-B | ||
| USB standards | USB 2.0, high speed | ||
| ACP control port | (1) 3.5 mm captive screw, 4 pole, supports up to 8 panels | ||
| Pin configuration | 1 = +12V, 2 = +S, 3 = -S, 4 = G | ||
| Power supply | 6 Watts max | ||
| Digital I/O | (6) 3.5 mm captive screw, 6 pole (shared with audio input) | ||
| Pin configuration | 1 = In, 2 = G, 3 = Out 1 | ||
| Voltage range | Input = 0V to +12V Output = 0V (low), 5V (high) Software programmable | ||
| Ethernet host port | 1 RJ-45 | ||
| Data rate | 10/100/1000 Base-T | ||
| Protocol | ARP, ICMP, IEEE 802.1X, IP, TCP, DHCP, HTTPS, Telnet, SSH | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off | ||
| Web server | Up to 200 simultaneous sessions | ||
| Program control | Extron DSP Configurator control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer®, Telnet | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz | ||
| Power input requirements | 12 VDC or Power over Ethernet Plus (PoE Plus IEEE 802.3at) | ||
| DMP 64 Plus C — power consumption | |||
| Power supply (PS 1220) | |||
| Device | 15.0 watts | ||
| Device and power supply | 16.7 watts | ||
| DMP 64 Plus C — thermal dissipation | |||
| Power supply (PS 1220) | |||
| Device | 38.9 BTU/Hr | ||
| Device and power supply | 44.6 BTU/Hr | ||
| DMP 64 Plus C AT — power consumption | |||
| Power injector (PI 140) | |||
| Device | 17.6 watts | ||
| Device and power injector | 23.6 watts | ||
| PoE+ PSE | |||
| Device | 21.8 watts | ||
| Power supply (PS 1220) | |||
| Device | 18.2 watts | ||
| Device and power supply | 19.6 watts | ||
| DMP 64 Plus C AT — thermal dissipation | |||
| Power injector (PI 140) | |||
| Device | 49.7 BTU/Hr | ||
| Device and power injector | 70.2 BTU/Hr | ||
| PoE+ PSE | |||
| Device | 57.2 BTU/Hr | ||
| Power supply (PS 1220) | |||
| Device | 48.2 BTU/Hr | ||
| Device and power supply | 52.7 BTU/Hr | ||
| DMP 64 Plus C V — power consumption | |||
| Power supply (PS 1220) | |||
| Device | 15.6 watts | ||
| Device and power supply | 17.4 watts | ||
| DMP 64 Plus C V — thermal dissipation | |||
| Power supply (PS 1220) | |||
| Device | 39.1 BTU/Hr | ||
| Device and power supply | 45.4 BTU/Hr | ||
| DMP 64 Plus C V AT — power consumption | |||
| Power injector (PI 140) | |||
| Device | 18.1 watts | ||
| Device and power injector | 23.8 watts | ||
| PoE+ PSE | |||
| Device | 21.7 watts | ||
| Power supply (PS 1220) | |||
| Device | 18.6 watts | ||
| Device and power supply | 20.4 watts | ||
| DMP 64 Plus C V AT — thermal dissipation | |||
| Power injector (PI 140) | |||
| Device | 51.4 BTU/Hr | ||
| Device and power injector | 70.8 BTU/Hr | ||
| PoE+ PSE | |||
| Device | 57.6 BTU/Hr | ||
| Power supply (PS 1220) | |||
| Device | 47.3 BTU/Hr | ||
| Device and power supply | 53.5 BTU/Hr | ||
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing | ||
| Cooling | Fan, front to back, fixed speed | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7″ H x 8.7″ W x 9.5″ D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 24.1 cm D) | ||
| Product weight | 2.35 lbs | ||
| Regulatory compliance | CE, c-UL, UL, CE, C-Tick, FCC Class A, ICES, RoHS, VCCI, WEEE, KC | ||
| Warranty | 3 years parts and labor | ||
| |||
| |||
Audio Devices, Pro Audio
Compare
EXTRON-DMP 64 PLUS C AT-6X4 60-1823-10
Availability:
7 in stock
199,410 EGP
7 in stock
Introducing the DMP 64 PLUS Audio Amplifier, a cutting-edge audio solution meticulously engineered to cater to the intricate needs of modern audio environments. This versatile amplifier stands out with its comprehensive features and certifications, making it an indispensable tool for professionals seeking exceptional audio quality and seamless integration in various settings.
Key Features:
- Versatile Input and Output Configuration: Equipped with 6 mic/line inputs and 4 line outputs, the DMP 64 PLUS offers flexibility to accommodate a range of audio setups.
- Advanced Acoustic Echo Cancellation: Features six channels of AEC, ensuring crystal-clear audio without echoes, enhancing communication and presentation quality.
- Certifications for Leading Platforms: Fully certified for Microsoft Teams and Zoom Rooms and verified with Logitech RoomMate, ensuring optimal compatibility and performance in video conferencing environments.
- USB Audio Interface: A configurable USB audio interface allows straightforward connectivity to computer-based codecs and playback sources, with customizable input/output configurations for tailored audio routing.
- Dante Audio Networking: The AT models support Dante audio networking, integrating seamlessly with Dante Domain Manager and offering AES67 support for extensive audio networking capabilities.
- VoIP Support: The V models incorporate up to eight VoIP lines, providing robust connectivity for voice-over IP communications.
- Compact and Efficient Design: Designed in a compact half-rack size, it saves space while delivering powerful audio performance.
Enhanced Features:
- FlexInput Technology: All main inputs feature FlexInput capability, allowing for versatile selection between Dante channels, expansion inputs, or local mic/line inputs.
- PoE+ Powered AT Models: Select models can be powered via PoE+, simplifying installation and reducing cabling complexity.
- Intuitive Control Panels: Optional ACP Series audio control panels offer direct, user-friendly audio control for setups that do not require a full control system.
- Sophisticated Audio Processing: Advanced processing on all outputs ensures superior sound quality, with extensive mix matrixing for precise audio routing and mixing.
Advanced Functionality:
- Low Latency Performance: Engineered with powerful DSP chips to minimize latency, ensuring audio remains synchronized with video, which is crucial for seamless presentations and performances.
- Adaptive Gain Processing: Features an adaptive gain processor to one level, maintaining automatically balanced audio during conferences automatically.
- Built-in Gigabit Switch: Includes a two-port Gigabit switch for daisy-chaining with other Dante-enabled devices, supporting redundant operation for enhanced reliability.
- Expansion Capabilities: A digital audio expansion port is offered, enabling linkage with another DMP Plus unit or Extron DTP CrossPoint matrix switchers for expanded audio routing options.
Professional Software Support:
- ProDSP Software: Comes with DSP Configurator Software, a powerful tool for managing audio operations, offering an intuitive graphical user environment for easy configuration and optimization.
- Versatile Preset Options: Supports up to 32 DSP Configurator presets, allowing for efficient setup and customization of audio processing, routing, and levels.
Reliability and Compliance:
- External Extron Everlast™ Power Supply: Includes a reliable Extron Everlast power supply, known for its high reliability and low power consumption, with a 7-year warranty for peace of mind.
- TAA Compliance: Available in a TAA Compliant version upon request, meeting government and institutional procurement requirements.
The DMP 64 PLUS Audio Amplifier embodies the pinnacle of audio amplification technology, offering unparalleled flexibility, crystal-clear audio quality, and robust connectivity options. It is ideal for professionals demanding the best in audio conferencing, presentations, and complex audio setups.
Based on 0 reviews
Be the first to review “EXTRON-DMP 64 PLUS C AT-6X4 60-1823-10”
Related products
- Pro Audio, Loudspeakers
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
SKU: #0015 - Pro Audio, Loudspeakers
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
SKU: #0016 - Pro Audio, Loudspeakers
LC1-WM06E8 – Ceiling loudspeaker, 6W, metal, 4″
LC1-WM06E8 Ceiling loudspeaker, 6 W, integrated circular metal grille, 4-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Numerous ceiling situations may be utilized with the Bosch LC1-WM06E8 Loudspeaker series. They deliver high-quality music and voice for indoor public address systems. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction. It has two very effective 12W and 24W coaxial loudspeaker drivers in addition to three 6W single cone loudspeakers with adjustable opening angles.
They may all be used with the same mounting accessories and have the same grille size. When fitted with the LC1-MFD enclosure, the Bosch LC1-WM06E8 Ceiling Loudspeakers are appropriate for use in air-handling rooms.
Check out LC1 Ceiling loudspeaker Price.
The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board. They may all be used with the same mounting accessories and have the same grille size.
When fitted with the LC1-MFD enclosure, the LC1 Ceiling loudspeaker metal is appropriate for use in air-handling rooms. The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board.
Buy LC1 Ceiling loudspeaker, 6W from our store now!
SKU: #0020 - Pro Audio, Loudspeakers
LC3-UC06E – Ceiling loudspeaker, 6W, spring arms
The LC3-UC06E Ceiling loudspeaker is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt.
Key Features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Unobtrusive design
- EN 54‑24 certified
The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The LC3 Ceiling loudspeaker spring arms, frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.
Check out LC3 Ceiling loudspeaker Price.
Installation and Setup
With built-in spring arms that firmly hold the LC3-UC06E Ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
The LC3-UC06E Ceiling loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
The loudspeaker is equipped with heat-resistant high temperature wire, a thermal fuse, and a ceramic screw-terminal connecting block. holes (11 mm) for two cable glands (20.5 mm) and two rubber grommets (standard provided).
Four primary taps for 100 V are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power and one‑eighth‑power.
The optional back‑box (LC3‑CBB) protects the rear of the loudspeaker from dust, falling objects, makes the unit vermin proof and prevents sound traveling via the ceiling cavity to adjacent areas.
The back‑box is assembled with the loudspeaker by means of a snap‑in construction and has knock‑out holes (11 mm) for two rubber grommets (standard supplied) and for two cable glands (20.5 mm).
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0022
There are no reviews yet.