| Video | |||
|---|---|---|---|
| VGA | |||
| Gain | Unity | ||
| Bandwidth | 170 MHz (-3 dB) | ||
| Crosstalk | -50 dB @ 10 MHz, -30 dB @ 100 MHz | ||
| Switching speed | <5 ms. (max) | ||
| HDMI | |||
| Maximum data rate | 6.75 Gbps (2.25 Gbps per color) | ||
| Maximum pixel clock | 165 MHz | ||
| Resolution range | Up to 1920×1200 or 1080p @ 60 Hz; 2k | ||
| Formats | RGB and YCbCr digital video | ||
| Standards | DVI 1.0, HDMI, HDCP 1.1, CEA-861E | ||
| Video input — HDMI | |||
| Number/signal type | 2 HDMI inputs (or single link DVI-D with the appropriate DVI-HDMI adapters) | ||
| Connectors | 2 female HDMI type A | ||
| Video input — VGA | |||
| Number/signal type | 1 VGA-QXGA; RGBHV | ||
| Connectors | 1 female 15-pin HD | ||
| Nominal level | 0.7 Vp-p | ||
| Min./max. level | Analog, 0.3 V to 1.5 Vp-p with no offset | ||
| Impedance | 75 ohms | ||
| Horizontal frequency | 15 kHz to 145 kHz | ||
| Vertical frequency | 30 Hz to 170 Hz | ||
| Return loss | <-40 dB @ 5 MHz | ||
|
|||
| Sync — VGA | |||
| Input type | RGBHV, bi-level and tri-level sync | ||
| Input level | 1.9 V to 5.0 Vp-p | ||
| S/N | >90 dB at maximum input (unweighted) | ||
| Max. input voltage | 5.0 Vp-p | ||
| Interconnection between transmitter and receiver | |||
| Number/signal type | 1 DTP 230 output | ||
| Connector | 1 female RJ-45 | ||
| Termination standard | TIA/EIA T568B | ||
| Transmission distance | Up to 230′ (70 m) using shielded twisted pair cable or XTP DTP 24 STP cable | ||
| Cable requirements | Solid conductor, 24 AWG or better | ||
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
|
|||
| Audio | |||
| Gain | Unbalanced output: 0 dB; balanced output +6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
| THD + Noise | 0.01% @ 1 kHz at nominal level | ||
| S/N | >90 dB, at maximum input (unweighted) | ||
| Crosstalk | <-45 dB @ 20 kHz, or -72 dB @ 1 kHz or below | ||
| Stereo channel separation | >80 dB @ 1 kHz to 20 kHz | ||
| Audio input | |||
| Number/signal type | 1 analog stereo, unbalanced or 2-digital audio, embedded in the HDMI |
||
| Connectors | 1 female 3.5 mm mini stereo jack 2 female HDMI Type A (shared with video input) |
||
| Source formats | |||
| HDMI | LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel | ||
| Analog | Analog stereo audio | ||
| Impedance | 10k ohms, DC coupled | ||
| Nominal level | -10 dBV | ||
| Maximum level | +6dBV, unbalanced | ||
| CMRR | >60 dB typ @ 1 kHz | ||
| Input gain adjustment | -18 dB to +24 dB, 1 dB steps, adjustable per input | ||
|
|||
| Audio output | |||
| Number/signal type | 1 analog audio over DTP signal, or 1 embedded digital audio over DTP signal |
||
| Connectors | 1 RJ-45 jack | ||
| Communications — switcher | |||
| Serial control port | RS-232 via (1) 3.5 mm, 3 pole captive screw connector | ||
| Serial control pin configuration | Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd | ||
| Baud rate and protocol (RS-232) | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Tally port | (1) 3.5 mm, 4 pole captive screw connector | ||
| Tally port pin configuration | Pin 1 = input 1 tally, pin 2 = input 2 tally, pin 3 = input 3 tally, pin 4 = +5 VDC | ||
| Contact closure remote control | (1) 3.5 mm, 4 pole captive screw connector | ||
| Contact closure pin configuration | Pin 1 = input 1, pin 2 = input 2, pin 3 = input 3, pin 4 = Gnd | ||
| USB control port | 1 front panel female mini USB, type B | ||
| USB standards | USB 2.0, high speed | ||
| Program control | Extron Simple Instruction Set (SISTM) | ||
| Communications — RS-232/IR over DTP | |||
|
|||
| Serial control pass-through port | 1 RS-232 and IR via (1) 3.5 mm, 5-pole captive screw connector | ||
| Serial control pin configuration | Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd | ||
| Baud rates | 300 to 115200 baud | ||
| Protocol | 8 or 7 data bits 1 or 2 stop bits no parity (default) even or odd parity |
||
| IR pass-through control port | TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz | ||
| IR control pin configuration | 3 = Gnd, 4 = IR Tx, 5 = IR Rx | ||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
||
| Power consumption | |||
| Device | 4.7 watts | ||
| Device and power supply | 6.4 watts | ||
| Remote power budget | 12 watts | ||
|
|||
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Convection, vents on top and sides | ||
| Thermal dissipation | |||
| Device | 16.0 BTU/hour | ||
| Device and power supply | 21.6 BTU/hour | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U high rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.0″ H x 8.75″ W x 6.0″ D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | 0.6 lbs (0.3 kg) | ||
| Regulatory compliance | CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI, Complies with the appropriate requirements of RoHS, WEEE |
||
|
|||
Pro Video, Transmitters & Receivers
Compare
DTP T USW 233 – Three Inputs Transmitter Switcher 230 feet (70 m)
Availability:
10 in stock
93,000 EGP
10 in stock
DTP T USW 233 – Three Inputs Transmitter Switcher 230 feet (70 m)
There are no reviews yet.