,

Crestron-DM-NVX-E30

Availability:

95 in stock


90,565 EGP

95 in stock

Crestron-DM-NVX-E30

Compare
Encoding
Stream Type Pixel Perfect Processing (default) or DM-NVX-D10/D20/D200 Series6
Video Resolutions Up to 4096×2160@60Hz (DCI 4K60), 4:4:4 color sampling, HDR10, HDR10+, Dolby Vision®, and Deep Color support
Audio Formats Multichannel (up to 8-channel LPCM or encoded HBR 7.1 surround sound)
Bit Rates Fixed: 200 to 950 Mbps – user specified,3
Adaptive: Dependent on input resolution of the stream, or
Variable: Less than 150 Mbps to maximum of 750 Mbps, dependent on content and input resolution of the stream
Streaming Protocols RTP, SDP
Container MPEG-2 transport stream (.ts)
Session Initiation Multicast via secure RTSP
Copy Protection HDCP 2.3, AES-128, PKI
Video
Input Signal Types HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support1, 7 (Dual-Mode DisplayPort™ interface and DVI compatible8)
Copy Protection HDCP 2.3
Resolutions Common resolutions are listed in the following table.
Scan
Type
Resolution Frame
Rate
Color
Sampling
Color
Depth
Progressive 4096×2160 DCI 4K and 3840×2160 4K UHD 30 Hz 4:4:4 12 bit
60 Hz 4:2:0 12 bit
60 Hz 4:2:2 12 bit
60 Hz 4:4:4 8 bit
2560×1600 WQXGA Reduced Blanking 60 Hz 4:4:4 8 bit
2560×1440 WQHD Reduced Blanking 60 Hz 4:4:4 8 bit
120 Hz 4:4:4 8 bit
2560×1080 UWFHD 60 Hz 4:4:4 8 bit
2048×1152 QWXGA 60 Hz 4:4:4 12 bit
2048×1080 DCI 2K 60 Hz 4:4:4 12 bit
1600×1200 UXGA 60 Hz 4:4:4 12 bit
1920×1200 WUXGA 60 Hz 4:4:4 12 bit
1920×1080 FHD 1080p 60 Hz 4:4:4 12 bit
120 Hz 4:4:4 8 bit
240 Hz 4:4:4 8 bit
Interlaced 1920×1080 HD 1080i 30 Hz 4:4:4 12 bit
NOTE: The maximum supported resolution is 4096×2160 at 60 Hz with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.
Audio
Input Signal Types HDMI (Dual-Mode DisplayPort interface compatible)8
Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels
Analog Formats Stereo 2-channel
Digital-To-Analog Conversion 24-bit 48 kHz
AES67 24-bit 48 kHz
Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >90 dB
Analog Output Volume Adjustment −80 to +20 dB
Communications
Ethernet 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, IPv4 only or both IPv4 and IPv6, Active Directory authentication, variable Multicast TTL, HTTPS web browser setup and control, Crestron 3-Series or later control system integration
USB USB 2.0 computer console (for setup)
RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system); computer console (for setup)
IR/Serial 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 V) up to 19.2k baud (via control system)
HDMI HDCP 2.3, EDID, CEC
DM NVX (via Ethernet) HDCP 2.3, AES-128 AV content encryption with PKI authentication, RTP, secure RTSP, SDP, ONVIF, IGMPv2, IGMPv3, SMPTE 2022, FEC (Forward Error Correction)
Connectors
Ethernet (1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port;2
PoE+ PD (powered device) port,
IEEE 802.3at Type 2 PoE+ Class 4 (25.5 W) compliant,
Compatible with Crestron DM-PSU-ULTRA-MIDSPAN, PoE+ compliant Ethernet switch, or approved third-party PSE5
HDMI INPUT (1) HDMI Type A connector, female;
HDMI digital video/audio input
(DVI and Dual-Mode DisplayPort interface compatible8)
AUDIO (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;4
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
CONSOLE, USB (1) Micro USB connector, female;
USB 2.0 computer console port (for setup)
IR 1 – 2 (1) 4-pin 3.5 mm detachable terminal block;
Comprises (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 V) up to 19200 baud;
IRP2 emitter sold separately
COM (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
24VDC 1.25A (1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
PW-2412WU power pack (sold separately)
G (1) 6-32 screw;
Chassis ground lug
Controls and Indicators
NV (1) Green LED, indicates unit is encoding (transmitting) network video
OL (1) Green LED, indicates an online connection to a control system via Ethernet
Ethernet (2) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
HDMI INPUT (1) Green LED, indicates sync detection at the HDMI input
PWR (1) Bi-color green/amber LED, indicates operating power supplied via PoE+ or optional power pack (sold separately), lights amber while booting and green when operating
SETUP (1) Red LED and (1) push button, displays onscreen IP address
RESET (1) Recessed push button, reboots the device
Power
PoE+ IEEE 802.3at Type 2 Class 4 (25.5 W) compliant;
Compatible with Crestron DM-PSU-ULTRA-MIDSPAN, PoE+ compliant Ethernet switch, or approved third-party PSE
Power Pack (Optional) Input: 0.8 A maximum @ 100-240 VAC, 50/60 Hz
Output: 1.25 A @ 24 VDC
Model: 
PW-2412WU (sold separately)
Power Consumption 15 W typical
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 48 BTU/hr
Acoustic Noise 33 dBA typical
Enclosure
Chassis Metal, black finish, integral mounting flanges, fan cooled; vented top, front, rear, and sides
Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height 5.41 in. (138 mm)
Width 9.27 in. (236 mm)
Depth 1.15 in. (30 mm)
Weight
1.7 lb (0.77 kg)
Compliance
Regulatory Model: M202013001
Bureau Veritas Listed for US and Canada, IC, CE, FCC Part 15 Class B digital device
SKU: #0104 Categories: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Crestron-DM-NVX-E30”

There are no reviews yet.

SHOPPING CART

close