DM800 | |
Type | Dynamic |
Frequency Response | 60 – 14000 Hz |
Polar Pattern | Cardioid |
Sensitivity | -53 dB |
Impedance | 600Ω |
Weight | 360 g |
Dimensions | H 180 x Ø 45 mm |
1,287 EGP
Specifically engineered for on stage performance, this mic offers flat and wide Frequency Response.
The cardioid polar pattern isolates the vocals from the background noise on stage or in studio.
Used on live or studio applications, the DM800 cardioid microphone is the right choice for clarity, resistance to feedback and ability to handle SPL without distortion.
DM800 | |
Type | Dynamic |
Frequency Response | 60 – 14000 Hz |
Polar Pattern | Cardioid |
Sensitivity | -53 dB |
Impedance | 600Ω |
Weight | 360 g |
Dimensions | H 180 x Ø 45 mm |
An affordable flush-mounting ceiling loudspeaker for general-purpose use is the LBC 3087/41. This full-range loudspeaker is used in retail establishments, department stores, restaurants, offices, sports arenas, hotels, and shops to reproduce speech and music.
A single-piece, 6 W, dual-cone loudspeaker powers the LBC 3087/41. On the rear of the frame is a matching transformer with a voltage of 100 V. The front features an integrated circular metal grille that is painted in a subtle white hue (RAL 9010).
In the case of a fire, the built-in protection in the loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
The assembly is quickly installed into a hole in the ceiling cavity and secured with three white-colored screws (supplied). A circular template for marking a 165 mm (6.5 in) diameter hole is included with the loudspeaker.
Buy LBC Ceiling loudspeaker 6W now!
The LBC Ceiling loudspeaker has a three-way terminal block with screw connections suitable for loop-through wiring. Four primary taps are provided on the matching transformer to allow selection of nominal full-power, half-power, quarter-power or eighth power radiation (i.e. in 3 dB steps).
Check out LBC Ceiling loudspeaker Price.
During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).
See LBC Ceiling loudspeaker.
Elevate your audio experience with the Bosch PLE-1MA030 Plena Mixer Amplifier, a powerhouse of versatility designed for background audio PA and commercial audio installations. This compact yet robust amplifier delivers 30 watts of power, ensuring your message is heard loud and clear in retail stores, commercial offices, halls, and beyond. Its straightforward interface makes operation a breeze for users of all skill levels, allowing you to focus on delivering your content seamlessly.
The Bosch PLE-1MA030 stands out with its tabletop form factor, fitting seamlessly into any setup. It supports four channels and offers a comprehensive frequency response from 50 Hz to 20 kHz +1/-3 dB at rated power, ensuring high-quality sound reproduction across a broad audio spectrum. With less than 1% distortion at rated power, this amplifier guarantees crystal-clear sound for all your PA needs.
Designed for efficiency, the amplifier operates on 230 VAC, 50/60 Hz, with a modest power consumption of 100 VA and a current consumption of 4.5 A. This makes the PLE-1MA030 powerful and economical to run, ideal for installations where the amplifier will be in use for extended periods.
Coming in a package that weighs 17.05 lb with dimensions of 22.6 x 14.2 x 9 inches, this amplifier is as sturdy as it is functional. It promises an easy installation process, fitting effortlessly into your existing audio setup, and its durable construction ensures it can withstand the rigors of daily use.
The Bosch PLE-1MA030 Plena Mixer Amplifier is the cost-effective, ideal solution for enhancing audio communications in a variety of settings. Its blend of functionality, ease of use, and performance make it a valuable addition to any commercial space looking to improve its audio system. Whether for announcements, background music, or paging applications, this amplifier delivers reliable, high-quality sound that meets the demands of professional audio installations.
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
LC1-UM24E8 ceiling loudspeaker, 24 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
The LC1 ceiling loudspeaker coaxial range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
The LC1-UM24E8 ceiling loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
Buy LC1 Ceiling loudspeaker, 24W from OmniSignals now!
Voice alarm loudspeakers are specifically designed for use in buildings where system performance for verbal evacuation announcements is governed by regulations. The LC1 Modular Ceiling Loudspeaker range is designed for use in voice alarm systems and is EN 54‑24 certified and compliant with British standard BS 5839‑8.
The LC1-UM24E8 has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
The LC1-UM24E8 Ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Check out our LC1 Ceiling Loudspeaker Price.
There are no reviews yet.