TX-8 | |
Type | Moving Coil Dynamic |
Frequency Response | 50~16,000 Hz |
Polar Pattern | Cardioid,rotationally symmetrical about microphone axis, uniform with frequency |
Sensitivity(at 1,000Hz) | -75dB*(0.18mV)*0dB=1V/μbar |
Impedance | 600Ω |
Net Weight | TX-8: 345 grams (cable excluded) |
JTS TX-8 Dynamic Wired Microphone
1,755 EGP
The JTS TX-7/TX-8 Dynamic Vocal microphone delivers superb performance at a modest cost. The tight cardioid pattern provides excellent off-axis rejection minimizing feedback and undesired background stage noise. The TX-7/TX-8’s internal shock mount greatly reduces handling noise when used in a handheld application or when placed on a Mic stand.
Based on 0 reviews
Be the first to review “JTS TX-8 Dynamic Wired Microphone” Cancel reply
Related products
-
Pro Audio, Loudspeakers
LC3-UC06 – Ceiling loudspeaker, 6W
0 out of 5(0)The LC3-UC06 Ceiling loudspeaker is an affordable, all-purpose 6 W ceiling loudspeaker that may be powered by 3, 6, or 1.5 Watts and is compatible with a 100 V supply.
Key features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Optional back-box
- Unobtrusive design
A low impedance (4 Ohm) variant of the ceiling loudspeaker, the LC3-UC06-LZ, may be connected directly to the output of a low impedance amplifier.
The optional back-box LC3-CBB completely shields the loudspeaker from dust and falling items, and it also stops sound from entering adjacent spaces through the ceiling hollow.
As per UL 94V0, the LC3-UC06 Ceiling loudspeaker frame, grill, and back-box are made of self-extinguishing ABS.
Installation
With built-in spring arms that firmly hold the ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
Flying leads are used for the electrical connection, with each hue linked to a separate primary tap on the corresponding transformer. The matching transformer has three primary taps for 100 V, allowing for the selection of nominal full, half, and quarter power.
The optional back-box (LC3-CBB) keeps the loudspeaker safe from dust and falling debris, makes it pest-proof, and stops sound from entering adjacent spaces through the ceiling hollow.
Check out LC3 Ceiling loudspeaker Price.
Certification
The LC3-UC06 Ceiling loudspeaker is built to meet IEC 268‑5 Power Handling Capacity (PHC) specifications, which require them to operate at full power for 100 consecutive hours.
Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees enhanced dependability in harsh circumstances, resulting in increased customer satisfaction, an extended operational lifespan, and a decreased likelihood of malfunction or decline in performance.
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0017 -
Pro Audio, Loudspeakers
Bosch LBC 3484/00 Horn Loudspeaker, 50W
0 out of 5(0)The Bosch LBC Horn Loudspeaker 50W is a circular loudspeaker with a 50 W horn that has a diameter of 490 mm (19.6 in). It is constructed of aluminum. For protection against impact damage, a PVC profile covers the horn’s edges. It is dust and water resistant and light gray (RAL 7035).
Key Features
- High efficiency driver
- Excellent speech reproduction
- Provision for inside mounting of the optional line/loudspeaker supervision board
- Water-and dust protected to IP 65
- BS 5839‑8 and EN 60849 compliant
Easy Power Configuration
A three-way terminal block with a screw connection (including earth) is included on the horn. The matching transformer has three primary taps that allow you to pick nominal full-power, half-power, or quarter-power radiation (in steps of three dB).
We offer all Bosch LBC Horn Loudspeaker parts.
Mounting
Accurate direction of the sound beam is made possible by the robust adjustable steel mounting brackets that come with the horn loudspeakers.
Buy Bosch LBC Horn Loudspeaker from OmniSignals now!
Functions
Self-extinguishing ABS is used to make the horn’s rear cover (according to class UL 94 V0). The connecting cable exits the back cover through a cable gland (PG 13.5). The back cover has a second hole installed for a loop through connection (covered as usual provided).
These integrated horns may also be installed with any combination of horn and driver because they are available as separate horn and driver. Refer to the order details for the type numbers.
See Bosch LBC Horn Loudspeaker 50W price.
Approvals and certifications
Bosch LBC Horn Loudspeaker 50W is made to meet IEC 268-5 Power Handling Capacity (PHC) regulations, which require them to be able to operate at full power for 100 hours. Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees increased dependability in harsh environments, resulting in increased customer satisfaction, an extended operational life, and a far lower likelihood of failure or performance degradation.
SKU: #0028 -
Pro Audio, Loudspeakers
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
0 out of 5(0)The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
SKU: #0016 -
Pro Audio, Loudspeakers
LBC3099/41 – Ceiling loudspeaker, 24W, 8″
0 out of 5(0)A flush-mounting ceiling loudspeaker for situations requiring more power, including high-ceilinged rooms, is the LBC3099/41 Ceiling loudspeaker. It provides a broad frequency range and a high sound pressure level to guarantee clear conversation and high-quality music reproduction. Applications for it include retail establishments, department stores, restaurants, hotels, offices, sports arenas, and schools.
The LBC 3099/41 has a single-piece, 24 W, dual-cone loudspeaker. A 100 V matching transformer is mounted on the back of the frame. An attractive metal grille is integrated with the front, and finished in an unobtrusive white color (RAL 9010).
Ceiling loudspeaker, 24 W, integrated circular metal grille, two spring-loaded clamps for ceiling mounting, three-way screw terminal block, white RAL 9010.
Key Features
- Outstanding audio and speech reproduction
- Elevated amount of sound pressure
- Perfect for situations with high ceilings
- Ceiling-mounted flush fixtures
- Mounting clamps
- Basic power configuration
- The inconspicuous white metal grille
- Ball-proof
- Conforms to international safety and installation standards
- BS 5839-8 and EN 60849 compliant
speaker for voice alarms
Speakers intended for voice alarms are particularly made to be used in buildings where rules control how well verbal evacuation alert systems operate. According to emergency standards, the LBC3099/41 Ceiling loudspeaker is compatible and meant to be used in voice alarm systems.
Check out LBC Ceiling loudspeaker Price.
Terminal Block
The device includes a three-way terminal block that may be wired loop-through since it contains screw connectors for all connections, including earth. The corresponding transformer has three primary taps that allow the user to pick nominal full-power, half-power, or quarter-power radiation (in steps of three dB).
Take a look on our LBC Ceiling loudspeaker 24W.
LBC 3082/00 Fire Dome
LBC3099/41 Ceiling loudspeaker with LBC 3082/00 fire dome assembly. The unit has two built-in spring-loaded locking clamps to secure it into a hole in suspended ceilings and wallboards from 9 to 25 mm (0.35 to 1.0 in) thick. A circular template for marking a 210 mm (8.3 in) diameter hole is included with the loudspeaker.
SKU: #0013
There are no reviews yet.