Transducer type . . . . . . . . . . . . . . . . Condenser (back electret)
Operating principle . . . . . . . . . . . . . Pressure
Polar pattern . . . . . . . . . . . . . . . . . . Omnidirectional
Frequency response . . . . . . . . . . . . . 20 – 20,000 Hz
Open circuit voltage . . . . . . . . . . . . . 4 mV/Pa (-48 dBV)* ±3 dB
Nominal impedance . . . . . . . . . . . . . 1 k ohm
Max. SPL . . . . . . . . . . . . . . . . . . . . . 127 dB SPL*
Signal-to-noise ratio . . . . . . . . . . . . . 47 dB [CCIR, Q-Peak]* Equivalent
SPL . . . . . . . . . . . . . . . . . 35 dB [A, RMS]*
Power supply . . . . . . . . . . . . . . . . . . Direct current
Max. power consumption . . . . . . . . 0.5 mA
Supply voltage . . . . . . . . . . . . . . . . . 2 – 9 V
Connector . . . . . . . . . . . . . . . . . . . . Mini-XLR, 4-pin, female
Dimensions
Capsule diameter . . . . . . . . . . . . . 3 mm
Cable length . . . . . . . . . . . . . . . . . 1.2 m
Weight (with cable/connector) . . . . . 18 g
BEYERDYNAMIC – TG H56 MINI CONDENSER NECK WORN
10 in stock
8,150 EGP
10 in stock
Key Features
- Natural sound with no proximity impact because of the polar pattern’s omni directionality
- Maximum SPL of 127 dB
- Low noise and high SNR
- Adjustable neck structure and rotatable ear hooks
- Systems that are either wireless or wired require the optional MA PVA (TG) or CV 18 (Opus) phantom power converter in order to be used wiredly
All Set for the Stage
In other words, the Beyerdynamic TGH56BK microphone combines a discreet look with a commanding and balanced sound, all without drawing attention to itself. The rotating ear hooks allow the splash- and sweat-proof omnidirectional microphone to be worn on either side. Furthermore, the flexible microphone arm allows for precise positioning, which is advantageous for applications such as musicals, theater, and sports.
Pin Out TG
The Unite and TG series pocket transmitters, such as the -100, -500, or -1000, are compatible with the “TG” version. The “MA PVA” power converter is required if the microphone is wired; it transforms the phantom power from the microphone input into the audio wire power supply that the microphone needs.
Don’t forget to check out the Beyerdynamic TGH56BK price.
Take Note of Every Detail
Natural tone for any situation. With the Beyerdynamic TGH56BK Touring Gear series, you have exceptional versatility together with tremendous capabilities. You can discover the perfect microphone for every purpose thanks to the wide selection of microphones, which includes Beyerdynamic motor, lavaliers, vocal headsets, Beyerdynamic machine, and more.
Every Beyerdynamic TGH56BK microphone is designed to offer you clean, authentic sound and easy plug-and-play operation, whether it’s your first or 50th concert. Additionally, every microphone has its unique Sound Channeling technology, allowing you to maximize sound waves for unparalleled sound quality.
Buy Beyerdynamic mini from OmniSignals now!
Specifications
- Transducer Type: Condenser (back electret)
- Operating Principle: Pressure
- Polar Pattern: Omnidirectional
- Frequency Response: 20Hz – 20kHz
- Open Circuit Voltage: 4mV/Pa (-48dBV), +/-3dB
- Nominal Impedance: 1 k Ohm
- Maximum SPL: 127dB SPL
- Signal-to-Noise Ratio: 47dB (CCIR, Q-Peak)
- Equivalent SPL: 35dB (A, RMS)
- Power Supply: Direct current
- Maximum Power Consumption: 0.5mA
- Supply Voltage: 2-9V
- Connector: Mini-XLR, 4-pin, female
- Pin Out: TG
- Capsule Diameter: 3mm
- Cable Length: 1.2m
- Weight: 18g (with cable/connector)
Based on 0 reviews
Be the first to review “BEYERDYNAMIC – TG H56 MINI CONDENSER NECK WORN”
Related products
-
Pro Audio, Power Amplifiers
Bosch PLE-1MA030-EU – Priority mixer amplifier, 30W
Elevate your audio experience with the Bosch PLE-1MA030 Plena Mixer Amplifier, a powerhouse of versatility designed for background audio PA and commercial audio installations. This compact yet robust amplifier delivers 30 watts of power, ensuring your message is heard loud and clear in retail stores, commercial offices, halls, and beyond. Its straightforward interface makes operation a breeze for users of all skill levels, allowing you to focus on delivering your content seamlessly.
Key Features and Benefits
- Versatile Inputs: With four microphone/line inputs and three additional music source inputs, this amplifier is built to handle a variety of audio sources, making it perfect for any setting that requires both speech and background music.
- Priority Functions: Equipped with 100V and telephone input options, the PLE-1MA030 ensures priority and VOX override, meaning important announcements can cut through any background music or other audio, ensuring critical messages are heard.
- Intuitive Operation: This mixer amplifier features an announcement-only output and a 3-wire volume override for easy control during paging applications. The voice-activated emergency override and 2-tone chime add layers of functionality for comprehensive audio management.
- Tone Controls: Unique and easy-to-use intuitive tone controls with 2-band EQ (Bass: ±12 dB, Treble: ±12 dB) allow for fine-tuning of the audio output, ensuring your broadcasts are clear and pleasant to listen to.
Advanced Design and Performance
The Bosch PLE-1MA030 stands out with its tabletop form factor, fitting seamlessly into any setup. It supports four channels and offers a comprehensive frequency response from 50 Hz to 20 kHz +1/-3 dB at rated power, ensuring high-quality sound reproduction across a broad audio spectrum. With less than 1% distortion at rated power, this amplifier guarantees crystal-clear sound for all your PA needs.
Power Efficient
Designed for efficiency, the amplifier operates on 230 VAC, 50/60 Hz, with a modest power consumption of 100 VA and a current consumption of 4.5 A. This makes the PLE-1MA030 powerful and economical to run, ideal for installations where the amplifier will be in use for extended periods.
Easy Installation and Use
Coming in a package that weighs 17.05 lb with dimensions of 22.6 x 14.2 x 9 inches, this amplifier is as sturdy as it is functional. It promises an easy installation process, fitting effortlessly into your existing audio setup, and its durable construction ensures it can withstand the rigors of daily use.
The Bosch PLE-1MA030 Plena Mixer Amplifier is the cost-effective, ideal solution for enhancing audio communications in a variety of settings. Its blend of functionality, ease of use, and performance make it a valuable addition to any commercial space looking to improve its audio system. Whether for announcements, background music, or paging applications, this amplifier delivers reliable, high-quality sound that meets the demands of professional audio installations.
SKU: #0035 -
Pro Audio, Loudspeakers
LC5-WC06E4 – Ceiling loudspeaker, 6W, ABS, 2″
The LC5-WC06E4 Ceiling loudspeaker is an extreme compact ceiling loudspeaker, suitable for speech and background music reproduction.
Key Features
- Suitable for speech and music reproduction
- Extreme compact size
- Suitable for use in humidity-, chlorine- and salty environments
- Selectable 70 V ,100 V and 8 Ohm input
- EN 54‑24 certified
Design
The design of the front grille perfectly matches with current available recessed luminaires, integrating light and sound.
The optional back‑box LC5‑CBB fully protects the rear of the loudspeaker from dust and dripping water from above, making the combination IP 44 protected.
The loudspeaker frame, grille and back‑box are manufactured from self‑extinguishing ABS according to UL 94 V 0.
Usage
This LC5-WC06E4 Ceiling loudspeaker is suitable for use in low ceiling applications with low noise level. The small driver used in the unit stands for delivering good sound quality from a small sized unit and provides a wide opening angle for the important frequency octaves.
Fewer loudspeakers are needed to cover a given area, and the noticeable “fading” that occurs as a listener walks from one loudspeaker to another area is eliminated.
The LC5 Ceiling loudspeaker ABS, 2 (with an assembled back‑box) is suitable for use in humidity-, chlorine- and salty environments.
See our LC5 Ceiling loudspeaker Price.
Installation
Installation is easy with two integral leaf springs that securely hold the loudspeaker in its cut‑out. The integral leaf springs can be adjusted in three positions to accommodate ceiling thicknesses from 5 mm to 25 mm.
The size of the ceiling cut‑out opening is standardized on available 3” (76.2 mm) cutting hole saws. No tool required for fitting the loudspeaker into the ceiling cut‑out.
The loudspeaker has built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected.
In this way, system integrity is maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation.
The LC5-WC06E4 Ceiling loudspeaker has ceramic screw‑terminal connection blocks, thermal fuse and heat-resistant high temperature wiring.
Buy LC5 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0018 -
Pro Audio, Loudspeakers
Bosch LBC 3210/00 Line Array Loudspeaker Indoor/Outdoor, 60W
This LBC Line Array 3210/00 Loudspeaker is capable of handling big (reverberant) interior situations such as train stations, airport departure lounges, and convention sites due to its high power output and good directivity. It can also be used outside, like at stadiums for sports or train stations. It is perfect for voice and music reproduction because to its complete frequency range.
Key Features
- Extended listening area
- Excellent intelligibility of speech and music
- Uniform distribution of natural sound throughout the room
- Provision for inside mounting the optional line/loudspeaker supervision board
- EN 54‑24 certified
The speaker’s ability to handle natural and medium communications, coupled with Audac technology, showcases its capability in delivering superb sound quality. With a competitive price, this product excels in handling diverse applications.
The Bosch LBC Line Array 3210/00 Loudspeaker is the epitome of excellence, offering a harmonious blend of cutting-edge technology, security, and highly suppressed drivers for an unparalleled audio experience.
Check LBC Line Array 3210/00 Loudspeaker price.
Easy Installation
Less narrow ‘beaming’ of higher tones occurs because the enhanced filtering creates bigger vertical opening angles for high frequencies. This line array has a more consistent opening angle throughout all key frequencies when compared to traditional column loudspeakers. For instance, the vertical opening angle is still 18° at 4 kHz.
Installation is made simpler by more consistent vertical opening angles since a larger coverage area means that loudspeaker location is less important. With a superior horizontal opening angle of 90° at 4 kHz, a single loudspeaker can reproduce genuine sound across a large listening area.
Buy Bosch Indoor/Outdoor Loudspeaker from OmniSignals now!
Suppressed Side Lobes
Every traditional column loudspeaker emits many unwelcome side lobes in addition to the primary, listener-facing lobe of sound.
The LBC Line Array 3210/00 Loudspeaker produces significantly cleaner, less “colored” sound, even up near to the loudspeakers, because of its strongly suppressed side lobes in the vertical plane, which are normally at least 10 dB from the 250 Hz octave band at 90°. This results in excellent voice and music intelligibility from the line array speakers.
SKU: #0029 -
Pro Audio, Loudspeakers
LC1-UM12E8 – Ceiling loudspeaker, 12W, coaxial
LC1-UM12E8 ceiling loudspeaker, 12 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- superb audio quality for both talking and music
- One grille size and one whole set of accessories make installation simple
- options for various ceiling mounting techniques
- Pilot Tone indicator that is optional
- UL2043, UL1480, and EN 54-24 certified
System Overview
Numerous ceiling situations are suitable for the LC1 Modular Ceiling Loudspeaker series. They offer top-notch music and voice for indoor public address applications. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction.
The LC1-MFD or LC1-MFDS enclosure may be used to mount the loudspeaker, which are appropriate for usage in areas where air is handled. The DC-blocking board PM1-LISD and optional monitoring board PRA-EOL can be mounted within the enclosure of the loudspeaker frame.
Check out the LC1 ceiling loudspeaker price.
Functions
Voice alarm applications
Voice alarm loudspeakers are made expressly to be used in buildings where rules control the verbal evacuation notification system’s functioning. The LC1 Modular Ceiling Loudspeaker series complies with British standard BS 5839–8 and is approved EN 54–24 for use in voice alarm systems.
Buy LC1 Ceiling loudspeaker, 12W from OmniSignals now!
Protection
In order to prevent connected circuit failure due to fire damage to the loudspeaker, the loudspeaker is equipped with built-in protection. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeaker in other locations.
To further strengthen the safety of the cable termination, the LC1-UM12E8 ceiling loudspeaker can also be utilized in conjunction with a metal fire-dome.
Connections
The LC1-UM12E8 ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Installation/configuration notes
The LC1 ceiling loudspeaker coaxial range is designed with ease of installation in mind, ensuring a user-friendly experience for seamless integration into diverse environments. The loudspeaker consists of a frame with the loudspeaker driver and metal or ABS grille with integrated light conductor, matching transformer and ceramic screw terminal connection block.
On the loudspeaker are provisions for mounting the optional end-of-line surveillance board and optional DC-blocking board. Power tapping on the 70 V / 100 V matching transformer allows selection of full-power, half power, quarter-power and eight-power radiation.
SKU: #0012
There are no reviews yet.