- Frequency Range:
518 – 548MHz - Transmission Range: Up to 120m (line of sight)
- Number of the Simultaneously Active Channels: 18 per frequency band
- Audio Frequency Response: 45 – 15kHz
- Audio Dynamic Range: 106dB (A-weighted)
- Operating Principle: Analog wireless microphone system with diversity receiver
- Output Level: Max. +3dBV/+5dBu
- Display: 2x LCD, white backlit
- Mains Connection: 100 – 240V AC with integrated power supply
- Power Consumption: 11W (typ.)
- Ambient Temperature: 32°F – 131°F (0°C – 55°C)
- Weight: 4.6lbs (2100g)
- Dimensions: 15.7″ x 6.9″ x 1.7″ (400mm x 175mm x 42mm)
- Antenna Connection: 2x BNC input
- Antenna Powering: 8V DC/150mA
Microphones, Pro Audio
Compare
Beyerdynamic TG 500DR 518-548MHz 2-CHANNEL
Availability:
10 in stock
28,530 EGP
10 in stock
Flexibility and Operating Range
Compared to similar systems, the Beyerdynamic TG 500DR offers significantly more flexibility of operation with an operating range of up to 120 meters.
Large-Scale Installations
The TG 500 system is appropriate for even bigger installations since it has a switching bandwidth of up to 40 MHz and can run up to 72 channels concurrently (18 compatible frequencies per band) when all four frequency bands are employed.
Receiver Design
The central component of each Beyerdynamic TG 500DR Manual set is a visually appealing receiver featuring a robust metal casing and a front panel that is parametrized.
User-Friendly Interface
The menu navigation is especially user-friendly because of the combination of simple operational components and a backlit LC display.
Frequency Response and Audio Inputs
The system has a frequency response between 45 and 15 kilohertz. Analog audio inputs include a balanced jack and a balanced XLR output.
Dual Receiver Features
If desired, the dual receiver’s two audio channels can be broadcast via a shared output; an additional mixing console is not necessary because of the mixed output.
Within the Beyerdynamic TG 500DR series, there is also a dual receiver in 19″ size (1 HU) with an integrated Beyerdynamic power supply and an antenna splitter built in. In order to use distant antennas, the dual receiver provides the antenna phantom power needed.
Check out the Beyerdynamic TG 500DR price!
Optimal Reception
Even in difficult settings, the diversity antenna operation ensures optimal reception for each receiver and prevents undesired transmission interruptions.
Interference-Free Operation
To guarantee interference-free multi-channel operation, preset groups of intermodulation-free transmission frequencies are also offered. Additionally, frequencies are freely assignable.
System Setup Assistance
Assistance with system setup is provided via a scan feature with automated search. When the battery is about to run low, the inbuilt pilot tone feature alerts you and guarantees interference-free transmission.
Based on 0 reviews
Be the first to review “Beyerdynamic TG 500DR 518-548MHz 2-CHANNEL”
Related products
-
Pro Audio, Loudspeakers
Bosch LA1UMx0E1 20 watt Metal Column Loudspeakers
The robust aluminum waterproof enclosure of the Bosch LA1‑UMx0E‑1 20 Watt Metal Column Loudspeakers 20watt power. The speakers reproduce background music effectively and offer a high degree of voice intelligibility. The speakers come complete with an installation guide and a swivel wall mount bracket.
Bosch Column Loudspeakers 20Watt Overview
- Reproduction of background music and clear speech
- In situations when directivity is crucial
- Weatherproof design that is slimline
- Wall-mounting bracket with swivel included as standard
- Robust aluminum construction
- Ability to switch between 8 Ohms and a 70/100 V line
- Provision for the optional line/loudspeaker supervision board can be mounted inside.
- EN 54‑24 certified
- BS 5839‑8 and EN 60849 compliant
Check out our column speaker 20Watt price.
Connections and security
Heat-resistant, high-temperature wire, a thermal fuse, and a ceramic terminal block are all included in the loudspeaker columns. The optional line/loudspeaker supervision board can be mounted internally in the column thanks to this feature.
Loudspeaker power output configuration
The matching transformer that is built-in has four main taps. To enable basic output power setting, the built-in transformer for the speakers is coupled to a rotating variable-tap switch at the rear of the enclosure. Also included on the rotary vary-tap switch is an 8 ohm option.
Alert voice
Voice alarm loudspeakers are made expressly to be used in situations where governmental restrictions govern the operation of public address systems. For voice alarm systems, the LA1-UM20E-1 and LA1-UM40E-1 are intended. Buy Bosch column loudspeakers 20Watt from our store.
Protection
In the case of a fire, the built-in protection in both loudspeaker columns will prevent the associated circuit from failing. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
SKU: #0023 -
Pro Audio, Loudspeakers
Bosch LH1-UC30E Music Horn Loudspeaker
The Bosch LH1-UC30E Loudspeaker is perfect for high-quality speech and music reproduction because of its two-way system, which produces an extended frequency range and great sensitivity.
Key Features
- Excellent speech and music reproduction
- Two‑way system
- Attractive ABS housing
- Provisions for internal mounting of the optional line / loudspeaker supervision board
- EN 54‑24 certified
Notes regarding installation and setup
The horn loudspeaker has a transformer that may operate at 70 V or 100 V. To adjust the power, taps are located on the primary winding. By connecting to the proper tap, it is simple to pick the nominal radiation level in quarter-, half-, full-, or eight-power increments (i.e., three decibel levels).
The connecting cable exits the vehicle through the rear cover’s ABS cable gland (PG13.5). The back cover has a second hole installed for a loop through connection (covered as standard provided). There is a space in the back cover for the optional line/loudspeaker supervision board to be mounted within.
See Bosch Music Horn Loudspeaker price.
Notes regarding specs
The specification data is measured in a free-field, anechoic chamber. The reference axis is perpendicular to the front grille’s center point. The reference plane is perpendicular to the reference axis’ center. The horizontal plane is perpendicular to the reference plane’s center.
Buy Bosch LH1-UC30E Loudspeaker now!
Sound Quality
Breathtaking sound clarity is achieved by the rectangular horn’s unusual mix of a re-entrant horn with two transducers, one for low frequencies and the other for high frequencies.
The horn may be used in humid environments and is weatherproof. Therefore, it may be used for both indoor public address and outdoor applications including athletic fields, sports stadiums, leisure parks, exhibition places, and passenger terminals.
SKU: #0026 -
Pro Audio, Loudspeakers
LC1-WM06E8 – Ceiling loudspeaker, 6W, metal, 4″
LC1-WM06E8 Ceiling loudspeaker, 6 W, integrated circular metal grille, 4-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Numerous ceiling situations may be utilized with the Bosch LC1-WM06E8 Loudspeaker series. They deliver high-quality music and voice for indoor public address systems. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction. It has two very effective 12W and 24W coaxial loudspeaker drivers in addition to three 6W single cone loudspeakers with adjustable opening angles.
They may all be used with the same mounting accessories and have the same grille size. When fitted with the LC1-MFD enclosure, the Bosch LC1-WM06E8 Ceiling Loudspeakers are appropriate for use in air-handling rooms.
Check out LC1 Ceiling loudspeaker Price.
The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board. They may all be used with the same mounting accessories and have the same grille size.
When fitted with the LC1-MFD enclosure, the LC1 Ceiling loudspeaker metal is appropriate for use in air-handling rooms. The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board.
Buy LC1 Ceiling loudspeaker, 6W from our store now!
SKU: #0020 -
Pro Audio, Loudspeakers
LC3-UC06E – Ceiling loudspeaker, 6W, spring arms
The LC3-UC06E Ceiling loudspeaker is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt.
Key Features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Unobtrusive design
- EN 54‑24 certified
The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The LC3 Ceiling loudspeaker spring arms, frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.
Check out LC3 Ceiling loudspeaker Price.
Installation and Setup
With built-in spring arms that firmly hold the LC3-UC06E Ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
The LC3-UC06E Ceiling loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
The loudspeaker is equipped with heat-resistant high temperature wire, a thermal fuse, and a ceramic screw-terminal connecting block. holes (11 mm) for two cable glands (20.5 mm) and two rubber grommets (standard provided).
Four primary taps for 100 V are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power and one‑eighth‑power.
The optional back‑box (LC3‑CBB) protects the rear of the loudspeaker from dust, falling objects, makes the unit vermin proof and prevents sound traveling via the ceiling cavity to adjacent areas.
The back‑box is assembled with the loudspeaker by means of a snap‑in construction and has knock‑out holes (11 mm) for two rubber grommets (standard supplied) and for two cable glands (20.5 mm).
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0022
There are no reviews yet.