Loudspeakers, Pro Audio
Compare
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
Availability:
10 in stock
32,035 EGP
10 in stock
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
Related products
-
Pro Audio, Loudspeakers
Bosch LBC 3483/00 Horn Loudspeaker, 35W
High-efficiency Bosch LBC Horn Loudspeaker 35W offers superior sound dispersion and speech reproduction for a variety of outdoor applications. They are perfect for industries, parks, swimming pools, sports fields, and exhibition spaces.
Key Features
- High efficiency driver
- Excellent speech reproduction
- Provision for inside mounting of the optional line/loudspeaker supervision board
- Water-and dust protected to IP 65
- EN 54‑24 certified
- BS 5839‑8 and EN 60849 compliant
loudspeaker for voice alarm
The LBC 3483/00 complies with emergency requirements and is intended for usage in voice alarm systems.In the case of a fire, the built-in protection of the horn loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations. The Horn loudspeaker boasts heat-resistant, high-temperature wire, a ceramic terminal block, and a thermal fuse.
We offer all Bosch LBC Horn Loudspeaker parts.
Functions
Self-extinguishing ABS is used to make the horn’s rear cover (according to class UL 94 V0). The connecting cable exits the back cover through a cable gland (PG 13.5). The back cover has a second hole installed for a loop through connection (covered as usual provided).
These integrated horns may also be installed with any combination of horn and driver because they are available as separate horn and driver. Refer to the order details for the type numbers.
Buy Bosch LBC Horn Loudspeaker from OmniSignals now!
Certifications and approvals
Bosch LBC Horn Loudspeaker 35W is made to meet IEC 268-5 Power Handling Capacity (PHC) regulations, which require them to be able to operate at full power for 100 hours. Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees increased dependability in harsh environments, resulting in increased customer satisfaction, an extended operational life, and a far lower likelihood of failure or performance degradation.
Check out Bosch LBC Horn Loudspeaker 35W price.
SKU: #0027 -
Pro Audio, Loudspeakers
LC1-UM12E8 – Ceiling loudspeaker, 12W, coaxial
LC1-UM12E8 ceiling loudspeaker, 12 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- superb audio quality for both talking and music
- One grille size and one whole set of accessories make installation simple
- options for various ceiling mounting techniques
- Pilot Tone indicator that is optional
- UL2043, UL1480, and EN 54-24 certified
System Overview
Numerous ceiling situations are suitable for the LC1 Modular Ceiling Loudspeaker series. They offer top-notch music and voice for indoor public address applications. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction.
The LC1-MFD or LC1-MFDS enclosure may be used to mount the loudspeaker, which are appropriate for usage in areas where air is handled. The DC-blocking board PM1-LISD and optional monitoring board PRA-EOL can be mounted within the enclosure of the loudspeaker frame.
Check out the LC1 ceiling loudspeaker price.
Functions
Voice alarm applications
Voice alarm loudspeakers are made expressly to be used in buildings where rules control the verbal evacuation notification system’s functioning. The LC1 Modular Ceiling Loudspeaker series complies with British standard BS 5839–8 and is approved EN 54–24 for use in voice alarm systems.
Buy LC1 Ceiling loudspeaker, 12W from OmniSignals now!
Protection
In order to prevent connected circuit failure due to fire damage to the loudspeaker, the loudspeaker is equipped with built-in protection. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeaker in other locations.
To further strengthen the safety of the cable termination, the LC1-UM12E8 ceiling loudspeaker can also be utilized in conjunction with a metal fire-dome.
Connections
The LC1-UM12E8 ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Installation/configuration notes
The LC1 ceiling loudspeaker coaxial range is designed with ease of installation in mind, ensuring a user-friendly experience for seamless integration into diverse environments. The loudspeaker consists of a frame with the loudspeaker driver and metal or ABS grille with integrated light conductor, matching transformer and ceramic screw terminal connection block.
On the loudspeaker are provisions for mounting the optional end-of-line surveillance board and optional DC-blocking board. Power tapping on the 70 V / 100 V matching transformer allows selection of full-power, half power, quarter-power and eight-power radiation.
SKU: #0012 -
Pro Audio, Loudspeakers
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
SKU: #0015 -
Pro Audio, Loudspeakers
LC5-WC06E4 – Ceiling loudspeaker, 6W, ABS, 2″
The LC5-WC06E4 Ceiling loudspeaker is an extreme compact ceiling loudspeaker, suitable for speech and background music reproduction.
Key Features
- Suitable for speech and music reproduction
- Extreme compact size
- Suitable for use in humidity-, chlorine- and salty environments
- Selectable 70 V ,100 V and 8 Ohm input
- EN 54‑24 certified
Design
The design of the front grille perfectly matches with current available recessed luminaires, integrating light and sound.
The optional back‑box LC5‑CBB fully protects the rear of the loudspeaker from dust and dripping water from above, making the combination IP 44 protected.
The loudspeaker frame, grille and back‑box are manufactured from self‑extinguishing ABS according to UL 94 V 0.
Usage
This LC5-WC06E4 Ceiling loudspeaker is suitable for use in low ceiling applications with low noise level. The small driver used in the unit stands for delivering good sound quality from a small sized unit and provides a wide opening angle for the important frequency octaves.
Fewer loudspeakers are needed to cover a given area, and the noticeable “fading” that occurs as a listener walks from one loudspeaker to another area is eliminated.
The LC5 Ceiling loudspeaker ABS, 2 (with an assembled back‑box) is suitable for use in humidity-, chlorine- and salty environments.
See our LC5 Ceiling loudspeaker Price.
Installation
Installation is easy with two integral leaf springs that securely hold the loudspeaker in its cut‑out. The integral leaf springs can be adjusted in three positions to accommodate ceiling thicknesses from 5 mm to 25 mm.
The size of the ceiling cut‑out opening is standardized on available 3” (76.2 mm) cutting hole saws. No tool required for fitting the loudspeaker into the ceiling cut‑out.
The loudspeaker has built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected.
In this way, system integrity is maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation.
The LC5-WC06E4 Ceiling loudspeaker has ceramic screw‑terminal connection blocks, thermal fuse and heat-resistant high temperature wiring.
Buy LC5 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0018
There are no reviews yet.