Loudspeakers, Pro Audio
Compare
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
Availability:
10 in stock
23,095 EGP
10 in stock
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
Based on 0 reviews
Be the first to review “LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair”
Related products
-
Pro Audio, Loudspeakers
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
SKU: #0016 -
Pro Audio, Loudspeakers
LBC3087/41 – Ceiling loudspeaker, 6W, screw mount
An affordable flush-mounting ceiling loudspeaker for general-purpose use is the LBC 3087/41. This full-range loudspeaker is used in retail establishments, department stores, restaurants, offices, sports arenas, hotels, and shops to reproduce speech and music.
A single-piece, 6 W, dual-cone loudspeaker powers the LBC 3087/41. On the rear of the frame is a matching transformer with a voltage of 100 V. The front features an integrated circular metal grille that is painted in a subtle white hue (RAL 9010).
In the case of a fire, the built-in protection in the loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
Key Features
- Suitable for speech and music reproduction
- Screw mounting
- Simple power setting
- EN 54‑24 certified
Installation
The assembly is quickly installed into a hole in the ceiling cavity and secured with three white-colored screws (supplied). A circular template for marking a 165 mm (6.5 in) diameter hole is included with the loudspeaker.
Buy LBC Ceiling loudspeaker 6W now!
Terminal Block
The LBC Ceiling loudspeaker has a three-way terminal block with screw connections suitable for loop-through wiring. Four primary taps are provided on the matching transformer to allow selection of nominal full-power, half-power, quarter-power or eighth power radiation (i.e. in 3 dB steps).
Check out LBC Ceiling loudspeaker Price.
Fire dome
During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).
See LBC Ceiling loudspeaker.
SKU: #0021 -
Pro Audio, Loudspeakers
LBC3095/15 – Pendant sphere loudspeaker, 10W
The LBC Pendant sphere loudspeaker is intended to hang from the ceiling with its attached wire. The lovely form and subdued hue of the pendant sphere mimic intriguing architectural elements on their own.
Key Features
- Suitable for speech and music reproduction
- Simple power setting
- 5 m fixed connection cable
- Water and dust protected
- Robust self-extinguishing ABS enclosure to UL 94 V0
- Complies with international installation and safety regulations
Notes regarding installation and setup
LBC3095/15 Pendant sphere loudspeaker comes with a four-core connection cable that is color-coded, with each color corresponding to a different primary tap on the matching 100 V transformer. This enables the selection of nominal full-power, half-power, or quarter-power radiation in steps of three decibels.
Functions
The pendant sphere is designed to be used outdoors and in high humidity environments, such as swimming pools, as it is splash waterproof. Its excellent sound spread makes it perfect for buildings with high ceilings, like hypermarkets and superstores.
The enclosures are made from high-impact self-extinguishing ABS (according to class UL 94 V0) and are white in color.
The pendant sphere is meant to be suspended from its color-matched connecting cable, which can be easily shortened for the desired height. A cable clamp and ceiling cover are included. However, it is not recommended for use in windy environments.
See our LBC Pendant sphere loudspeaker Price
Certifications and approvals
Bosch loudspeakers are engineered to endure continuous operation at their specified power for 100 hours, following the IEC 268-5 Power Handling Capacity (PHC) standards.
Additionally, Bosch has devised the Simulated Acoustical Feedback Exposure (SAFE) test to prove their ability to withstand double their rated power for brief periods.
This guarantees enhanced dependability in challenging environments, resulting in increased customer contentment, extended lifespan, and significantly reduced risk of malfunction or decline in performance.
Buy LBC Pendant sphere loudspeaker 10W from OmniSignals now!
SKU: #0030 -
Pro Audio, Power Amplifiers
Bosch PLE-1MA120-EU – Priority mixer amplifier, 120W
Bosch PLE-1MA120 Plena Mixer Amplifier: The Ultimate Sound Solution for Commercial Spaces
Elevate your audio experience with the Bosch PLE-1MA120 Plena Mixer Amplifier, designed to cater to the sophisticated needs of background audio PA systems and commercial audio installations. Boasting a robust 120 watts of power, this amplifier is your go-to solution for delivering clear, impactful sound across retail stores, commercial offices, halls, and more.
Key Features at a Glance:
- Powerful Audio Delivery: With 120 watts of output, the PLE-1MA120 ensures your message is heard loud and clear, whether it’s music, announcements, or both.
- Versatile Connectivity: Featuring four microphone/line inputs alongside 3 music source inputs and a dedicated 100V & telephone input, this amplifier provides the flexibility needed for various audio setups.
- Priority & VOX Override: Essential for paging and announcements, the VOX (voice-activated) override function ensures your messages take precedence, seamlessly integrating with the priority input for emergency broadcasting.
- Intuitive Operation: Designed with ease of use in mind, the PLE-1MA120 boasts a straightforward interface, allowing effortless operation by anyone.
- Tailored Sound Control: With adjustable talk-over functions and unique, intuitive tone controls, including a 2-band EQ (Bass: ±12 dB, Treble: ±12 dB), you can fine-tune your audio to perfection.
- Comprehensive Outputs: The amplifier offers output for line out and music only out, with an announcement-only work and a 3-wire volume override, ensuring versatile integration into your existing sound system.
- Reliable Performance: Crafted for consistency, the PLE-1MA120 delivers a frequency response of 50 Hz to 20 kHz +1/-3 dB (at Rated Power -10 dB) with less than 1% distortion at rated power, ensuring high-quality sound reproduction.
Designed for Durability and Convenience:
The Bosch PLE-1MA120 is housed in a tabletop form factor, making it an ideal fit for any setting. It’s engineered for efficiency with a power consumption of 400 VA and a maximum current consumption of 10 A. The package includes everything you need to start, weighing in at 24.55 lb with dimensions of 22.5 x 14.1 x 8.8 inches, ensuring a seamless setup process.
Why the Bosch PLE-1MA120 Plena Mixer Amplifier?
The Bosch PLE-1MA120 Plena Mixer Amplifier is more than just an amplifier; it’s a cost-effective, reliable solution that brings unparalleled clarity and control to your audio installations. Whether for announcements, background music, or emergency paging, the PLE-1MA120 enhances the auditory experience in retail, commercial, and public spaces. Elevate your audio setup with the PLE-1MA120 and ensure your message is always delivered precisely and clearly.
SKU: #0032
There are no reviews yet.