Loudspeakers, Pro Audio
Compare
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
Availability:
10 in stock
23,095 EGP
10 in stock
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
Based on 0 reviews
Be the first to review “LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair”
Related products
-
Pro Audio, Loudspeakers
LC5-WC06E4 – Ceiling loudspeaker, 6W, ABS, 2″
The LC5-WC06E4 Ceiling loudspeaker is an extreme compact ceiling loudspeaker, suitable for speech and background music reproduction.
Key Features
- Suitable for speech and music reproduction
- Extreme compact size
- Suitable for use in humidity-, chlorine- and salty environments
- Selectable 70 V ,100 V and 8 Ohm input
- EN 54‑24 certified
Design
The design of the front grille perfectly matches with current available recessed luminaires, integrating light and sound.
The optional back‑box LC5‑CBB fully protects the rear of the loudspeaker from dust and dripping water from above, making the combination IP 44 protected.
The loudspeaker frame, grille and back‑box are manufactured from self‑extinguishing ABS according to UL 94 V 0.
Usage
This LC5-WC06E4 Ceiling loudspeaker is suitable for use in low ceiling applications with low noise level. The small driver used in the unit stands for delivering good sound quality from a small sized unit and provides a wide opening angle for the important frequency octaves.
Fewer loudspeakers are needed to cover a given area, and the noticeable “fading” that occurs as a listener walks from one loudspeaker to another area is eliminated.
The LC5 Ceiling loudspeaker ABS, 2 (with an assembled back‑box) is suitable for use in humidity-, chlorine- and salty environments.
See our LC5 Ceiling loudspeaker Price.
Installation
Installation is easy with two integral leaf springs that securely hold the loudspeaker in its cut‑out. The integral leaf springs can be adjusted in three positions to accommodate ceiling thicknesses from 5 mm to 25 mm.
The size of the ceiling cut‑out opening is standardized on available 3” (76.2 mm) cutting hole saws. No tool required for fitting the loudspeaker into the ceiling cut‑out.
The loudspeaker has built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected.
In this way, system integrity is maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation.
The LC5-WC06E4 Ceiling loudspeaker has ceramic screw‑terminal connection blocks, thermal fuse and heat-resistant high temperature wiring.
Buy LC5 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0018 -
Pro Audio, Power Amplifiers
Bosch PLE-1MA030-EU – Priority mixer amplifier, 30W
Elevate your audio experience with the Bosch PLE-1MA030 Plena Mixer Amplifier, a powerhouse of versatility designed for background audio PA and commercial audio installations. This compact yet robust amplifier delivers 30 watts of power, ensuring your message is heard loud and clear in retail stores, commercial offices, halls, and beyond. Its straightforward interface makes operation a breeze for users of all skill levels, allowing you to focus on delivering your content seamlessly.
Key Features and Benefits
- Versatile Inputs: With four microphone/line inputs and three additional music source inputs, this amplifier is built to handle a variety of audio sources, making it perfect for any setting that requires both speech and background music.
- Priority Functions: Equipped with 100V and telephone input options, the PLE-1MA030 ensures priority and VOX override, meaning important announcements can cut through any background music or other audio, ensuring critical messages are heard.
- Intuitive Operation: This mixer amplifier features an announcement-only output and a 3-wire volume override for easy control during paging applications. The voice-activated emergency override and 2-tone chime add layers of functionality for comprehensive audio management.
- Tone Controls: Unique and easy-to-use intuitive tone controls with 2-band EQ (Bass: ±12 dB, Treble: ±12 dB) allow for fine-tuning of the audio output, ensuring your broadcasts are clear and pleasant to listen to.
Advanced Design and Performance
The Bosch PLE-1MA030 stands out with its tabletop form factor, fitting seamlessly into any setup. It supports four channels and offers a comprehensive frequency response from 50 Hz to 20 kHz +1/-3 dB at rated power, ensuring high-quality sound reproduction across a broad audio spectrum. With less than 1% distortion at rated power, this amplifier guarantees crystal-clear sound for all your PA needs.
Power Efficient
Designed for efficiency, the amplifier operates on 230 VAC, 50/60 Hz, with a modest power consumption of 100 VA and a current consumption of 4.5 A. This makes the PLE-1MA030 powerful and economical to run, ideal for installations where the amplifier will be in use for extended periods.
Easy Installation and Use
Coming in a package that weighs 17.05 lb with dimensions of 22.6 x 14.2 x 9 inches, this amplifier is as sturdy as it is functional. It promises an easy installation process, fitting effortlessly into your existing audio setup, and its durable construction ensures it can withstand the rigors of daily use.
The Bosch PLE-1MA030 Plena Mixer Amplifier is the cost-effective, ideal solution for enhancing audio communications in a variety of settings. Its blend of functionality, ease of use, and performance make it a valuable addition to any commercial space looking to improve its audio system. Whether for announcements, background music, or paging applications, this amplifier delivers reliable, high-quality sound that meets the demands of professional audio installations.
SKU: #0035 -
Pro Audio, Loudspeakers
Bosch LH1-UC30E Music Horn Loudspeaker
The Bosch LH1-UC30E Loudspeaker is perfect for high-quality speech and music reproduction because of its two-way system, which produces an extended frequency range and great sensitivity.
Key Features
- Excellent speech and music reproduction
- Two‑way system
- Attractive ABS housing
- Provisions for internal mounting of the optional line / loudspeaker supervision board
- EN 54‑24 certified
Notes regarding installation and setup
The horn loudspeaker has a transformer that may operate at 70 V or 100 V. To adjust the power, taps are located on the primary winding. By connecting to the proper tap, it is simple to pick the nominal radiation level in quarter-, half-, full-, or eight-power increments (i.e., three decibel levels).
The connecting cable exits the vehicle through the rear cover’s ABS cable gland (PG13.5). The back cover has a second hole installed for a loop through connection (covered as standard provided). There is a space in the back cover for the optional line/loudspeaker supervision board to be mounted within.
See Bosch Music Horn Loudspeaker price.
Notes regarding specs
The specification data is measured in a free-field, anechoic chamber. The reference axis is perpendicular to the front grille’s center point. The reference plane is perpendicular to the reference axis’ center. The horizontal plane is perpendicular to the reference plane’s center.
Buy Bosch LH1-UC30E Loudspeaker now!
Sound Quality
Breathtaking sound clarity is achieved by the rectangular horn’s unusual mix of a re-entrant horn with two transducers, one for low frequencies and the other for high frequencies.
The horn may be used in humid environments and is weatherproof. Therefore, it may be used for both indoor public address and outdoor applications including athletic fields, sports stadiums, leisure parks, exhibition places, and passenger terminals.
SKU: #0026 -
Pro Audio, Loudspeakers
LBC3099/41 – Ceiling loudspeaker, 24W, 8″
A flush-mounting ceiling loudspeaker for situations requiring more power, including high-ceilinged rooms, is the LBC3099/41 Ceiling loudspeaker. It provides a broad frequency range and a high sound pressure level to guarantee clear conversation and high-quality music reproduction. Applications for it include retail establishments, department stores, restaurants, hotels, offices, sports arenas, and schools.
The LBC 3099/41 has a single-piece, 24 W, dual-cone loudspeaker. A 100 V matching transformer is mounted on the back of the frame. An attractive metal grille is integrated with the front, and finished in an unobtrusive white color (RAL 9010).
Ceiling loudspeaker, 24 W, integrated circular metal grille, two spring-loaded clamps for ceiling mounting, three-way screw terminal block, white RAL 9010.
Key Features
- Outstanding audio and speech reproduction
- Elevated amount of sound pressure
- Perfect for situations with high ceilings
- Ceiling-mounted flush fixtures
- Mounting clamps
- Basic power configuration
- The inconspicuous white metal grille
- Ball-proof
- Conforms to international safety and installation standards
- BS 5839-8 and EN 60849 compliant
speaker for voice alarms
Speakers intended for voice alarms are particularly made to be used in buildings where rules control how well verbal evacuation alert systems operate. According to emergency standards, the LBC3099/41 Ceiling loudspeaker is compatible and meant to be used in voice alarm systems.
Check out LBC Ceiling loudspeaker Price.
Terminal Block
The device includes a three-way terminal block that may be wired loop-through since it contains screw connectors for all connections, including earth. The corresponding transformer has three primary taps that allow the user to pick nominal full-power, half-power, or quarter-power radiation (in steps of three dB).
Take a look on our LBC Ceiling loudspeaker 24W.
LBC 3082/00 Fire Dome
LBC3099/41 Ceiling loudspeaker with LBC 3082/00 fire dome assembly. The unit has two built-in spring-loaded locking clamps to secure it into a hole in suspended ceilings and wallboards from 9 to 25 mm (0.35 to 1.0 in) thick. A circular template for marking a 210 mm (8.3 in) diameter hole is included with the loudspeaker.
SKU: #0013
There are no reviews yet.