| Audio system | |||
|---|---|---|---|
| Gain | Balanced output: 0 dB, unbalanced output: -6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.2 dB | ||
| THD + Noise | <0.02%, 20 Hz to 20 kHz, at maximum level | ||
| S/N | |||
| Analog In to Analog Out | >109 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted) | ||
| Analog In to Digital Out | 110 dB, 20 Hz to 20 kHz, at full-scale output (unweighted) | ||
| Digital In to Analog Out | 115 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted) | ||
| Crosstalk | <-90 dB @ 20 Hz to 20 kHz, fully loaded | ||
| Volume control | -100 dB to 0 dB (control 0 to 100 in 0.1 dB steps) | ||
| Audio input | |||
| Number/signal type | 6 mono (or 3 stereo), mic/line, balanced/unbalanced, 6 with phantom power | ||
| Connectors | (3) 3.5 mm captive screw, 6 pole, mono, balanced/unbalanced | ||
| Impedance | >10k ohms balanced/unbalanced | ||
| Nominal level | -60 dBV, +4 dBu, -10 dBV adjustable via input gain | ||
| Maximum level | +21 dBu at rated THD+N when mic gain is set to 0 dB | ||
| Equivalent input noise | <-120 dBV (1 µVrms) at 40 dB input gain | ||
| CMRR | >60 dB typical | ||
| Input gain adjustment | -18 dB to +80 dB in 0.1 dB steps, adjustable per input | ||
| DC phantom power | +48 VDC, ±10% (inputs 1-6) can be switched on or off per input | ||
|
|||
| Audio output | |||
| Number/signal type | 4 mono (or 2 stereo), line, balanced/unbalanced | ||
| Connectors | (2) 3.5 mm captive screw, 6 pole, mono, balanced/unbalanced | ||
| Impedance | 100 ohms balanced, 50 ohms unbalanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+21 dBu balanced, >+15 dBu unbalanced | ||
| Audio processing | |||
| A/D, D/A conversion | 24-bit, 48 kHz | ||
| AEC tail length | >200 msec | ||
| AEC convergence | Up to 60 dB/sec | ||
| Noise cancellation | Up to 20 dB, software selectable | ||
| EXP port | |||
| Transmission type | Proprietary | ||
| Connector | 1 RJ-45 | ||
| Inputs | 16 channels Rx | ||
| Outputs | 16 channels Tx | ||
| Audio format | Uncompressed, 24-bit, 48 kHz | ||
| EXP cable | Shielded CAT6 up to 10 meters (1 foot cable included) | ||
| USB audio port | |||
| Connector | 1 rear panel USB mini-B | ||
| USB standards | USB 2.0, high speed | ||
| AT Ports (DMP 64 Plus AT models only) — audio transport | |||
| Transmission | Dante/AES-67, software selectable | ||
| Connectors | 2 RJ-45, 2-port 1 Gbps switch to Dante interface | ||
| Inputs | 32 channels Rx | ||
| Outputs | 16 channels Tx | ||
| Audio format | Uncompressed, 24-bit, 48 kHz | ||
| Latency | Deterministic, based on user selections: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms | ||
| VoIP Port (DMP 64 Plus V models only) | |||
| Connector | 1 RJ-45 | ||
| Data rate | 10/100/1000 Base-T | ||
| Signaling protocol | Session Initiation Protocol (SIP), RFC 3261 and related RFCs | ||
| Discovery protocol | LLDP-MED (optional) | ||
| Lines | Up to 8 concurrent, independent extensions | ||
| Codec support | Various ITU, including wideband | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.1.254 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Control/remote | |||
| Serial host control port | 1 bidirectional RS-232, 3.5 mm captive screw, 3 pole | ||
| Baud rate and protocol | 38400 baud, 8 data bits, 1 stop bit, no parity | ||
| Pin configuration | 1 = Tx, 2 = Rx, 3 = G | ||
| USB control port | 1 front panel USB mini-B | ||
| USB standards | USB 2.0, high speed | ||
| ACP control port | (1) 3.5 mm captive screw, 4 pole, supports up to 8 panels | ||
| Pin configuration | 1 = +12V, 2 = +S, 3 = -S, 4 = G | ||
| Power supply | 6 Watts max | ||
| Digital I/O | (6) 3.5 mm captive screw, 6 pole (shared with audio input) | ||
| Pin configuration | 1 = In, 2 = G, 3 = Out 1 | ||
| Voltage range | Input = 0V to +12V Output = 0V (low), 5V (high) Software programmable |
||
| Ethernet host port | 1 RJ-45 | ||
| Data rate | 10/100/1000 Base-T | ||
| Protocol | ARP, ICMP, IEEE 802.1X, IP, TCP, DHCP, HTTPS, Telnet, SSH | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Web server | Up to 200 simultaneous sessions | ||
| Program control | Extron DSP Configurator control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer®, Telnet |
||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz |
||
| Power input requirements | 12 VDC or Power over Ethernet Plus (PoE Plus IEEE 802.3at) | ||
| DMP 64 Plus C — power consumption | |||
| Power supply (PS 1220) | |||
| Device | 15.0 watts | ||
| Device and power supply | 16.7 watts | ||
| DMP 64 Plus C — thermal dissipation | |||
| Power supply (PS 1220) | |||
| Device | 38.9 BTU/Hr | ||
| Device and power supply | 44.6 BTU/Hr | ||
| DMP 64 Plus C AT — power consumption | |||
| Power injector (PI 140) | |||
| Device | 17.6 watts | ||
| Device and power injector | 23.6 watts | ||
| PoE+ PSE | |||
| Device | 21.8 watts | ||
| Power supply (PS 1220) | |||
| Device | 18.2 watts | ||
| Device and power supply | 19.6 watts | ||
| DMP 64 Plus C AT — thermal dissipation | |||
| Power injector (PI 140) | |||
| Device | 49.7 BTU/Hr | ||
| Device and power injector | 70.2 BTU/Hr | ||
| PoE+ PSE | |||
| Device | 57.2 BTU/Hr | ||
| Power supply (PS 1220) | |||
| Device | 48.2 BTU/Hr | ||
| Device and power supply | 52.7 BTU/Hr | ||
| DMP 64 Plus C V — power consumption | |||
| Power supply (PS 1220) | |||
| Device | 15.6 watts | ||
| Device and power supply | 17.4 watts | ||
| DMP 64 Plus C V — thermal dissipation | |||
| Power supply (PS 1220) | |||
| Device | 39.1 BTU/Hr | ||
| Device and power supply | 45.4 BTU/Hr | ||
| DMP 64 Plus C V AT — power consumption | |||
| Power injector (PI 140) | |||
| Device | 18.1 watts | ||
| Device and power injector | 23.8 watts | ||
| PoE+ PSE | |||
| Device | 21.7 watts | ||
| Power supply (PS 1220) | |||
| Device | 18.6 watts | ||
| Device and power supply | 20.4 watts | ||
| DMP 64 Plus C V AT — thermal dissipation | |||
| Power injector (PI 140) | |||
| Device | 51.4 BTU/Hr | ||
| Device and power injector | 70.8 BTU/Hr | ||
| PoE+ PSE | |||
| Device | 57.6 BTU/Hr | ||
| Power supply (PS 1220) | |||
| Device | 47.3 BTU/Hr | ||
| Device and power supply | 53.5 BTU/Hr | ||
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Fan, front to back, fixed speed | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7″ H x 8.7″ W x 9.5″ D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 24.1 cm D) |
||
| Product weight | 2.35 lbs | ||
| Regulatory compliance | CE, c-UL, UL, CE, C-Tick, FCC Class A, ICES, RoHS, VCCI, WEEE, KC | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
Audio Devices, Pro Audio
Compare
EXTRON-DMP 64 PLUS C AT-6X4 60-1823-10
Availability:
7 in stock
199,410 EGP
7 in stock
Introducing the DMP 64 PLUS Audio Amplifier, a cutting-edge audio solution meticulously engineered to cater to the intricate needs of modern audio environments. This versatile amplifier stands out with its comprehensive features and certifications, making it an indispensable tool for professionals seeking exceptional audio quality and seamless integration in various settings.
Key Features:
- Versatile Input and Output Configuration: Equipped with 6 mic/line inputs and 4 line outputs, the DMP 64 PLUS offers flexibility to accommodate a range of audio setups.
- Advanced Acoustic Echo Cancellation: Features six channels of AEC, ensuring crystal-clear audio without echoes, enhancing communication and presentation quality.
- Certifications for Leading Platforms: Fully certified for Microsoft Teams and Zoom Rooms and verified with Logitech RoomMate, ensuring optimal compatibility and performance in video conferencing environments.
- USB Audio Interface: A configurable USB audio interface allows straightforward connectivity to computer-based codecs and playback sources, with customizable input/output configurations for tailored audio routing.
- Dante Audio Networking: The AT models support Dante audio networking, integrating seamlessly with Dante Domain Manager and offering AES67 support for extensive audio networking capabilities.
- VoIP Support: The V models incorporate up to eight VoIP lines, providing robust connectivity for voice-over IP communications.
- Compact and Efficient Design: Designed in a compact half-rack size, it saves space while delivering powerful audio performance.
Enhanced Features:
- FlexInput Technology: All main inputs feature FlexInput capability, allowing for versatile selection between Dante channels, expansion inputs, or local mic/line inputs.
- PoE+ Powered AT Models: Select models can be powered via PoE+, simplifying installation and reducing cabling complexity.
- Intuitive Control Panels: Optional ACP Series audio control panels offer direct, user-friendly audio control for setups that do not require a full control system.
- Sophisticated Audio Processing: Advanced processing on all outputs ensures superior sound quality, with extensive mix matrixing for precise audio routing and mixing.
Advanced Functionality:
- Low Latency Performance: Engineered with powerful DSP chips to minimize latency, ensuring audio remains synchronized with video, which is crucial for seamless presentations and performances.
- Adaptive Gain Processing: Features an adaptive gain processor to one level, maintaining automatically balanced audio during conferences automatically.
- Built-in Gigabit Switch: Includes a two-port Gigabit switch for daisy-chaining with other Dante-enabled devices, supporting redundant operation for enhanced reliability.
- Expansion Capabilities: A digital audio expansion port is offered, enabling linkage with another DMP Plus unit or Extron DTP CrossPoint matrix switchers for expanded audio routing options.
Professional Software Support:
- ProDSP Software: Comes with DSP Configurator Software, a powerful tool for managing audio operations, offering an intuitive graphical user environment for easy configuration and optimization.
- Versatile Preset Options: Supports up to 32 DSP Configurator presets, allowing for efficient setup and customization of audio processing, routing, and levels.
Reliability and Compliance:
- External Extron Everlast™ Power Supply: Includes a reliable Extron Everlast power supply, known for its high reliability and low power consumption, with a 7-year warranty for peace of mind.
- TAA Compliance: Available in a TAA Compliant version upon request, meeting government and institutional procurement requirements.
The DMP 64 PLUS Audio Amplifier embodies the pinnacle of audio amplification technology, offering unparalleled flexibility, crystal-clear audio quality, and robust connectivity options. It is ideal for professionals demanding the best in audio conferencing, presentations, and complex audio setups.
Based on 0 reviews
Be the first to review “EXTRON-DMP 64 PLUS C AT-6X4 60-1823-10”
Related products
-
Pro Audio, Power Amplifiers
Bosch PLE-1MA120-EU – Priority mixer amplifier, 120W
Bosch PLE-1MA120 Plena Mixer Amplifier: The Ultimate Sound Solution for Commercial Spaces
Elevate your audio experience with the Bosch PLE-1MA120 Plena Mixer Amplifier, designed to cater to the sophisticated needs of background audio PA systems and commercial audio installations. Boasting a robust 120 watts of power, this amplifier is your go-to solution for delivering clear, impactful sound across retail stores, commercial offices, halls, and more.
Key Features at a Glance:
- Powerful Audio Delivery: With 120 watts of output, the PLE-1MA120 ensures your message is heard loud and clear, whether it’s music, announcements, or both.
- Versatile Connectivity: Featuring four microphone/line inputs alongside 3 music source inputs and a dedicated 100V & telephone input, this amplifier provides the flexibility needed for various audio setups.
- Priority & VOX Override: Essential for paging and announcements, the VOX (voice-activated) override function ensures your messages take precedence, seamlessly integrating with the priority input for emergency broadcasting.
- Intuitive Operation: Designed with ease of use in mind, the PLE-1MA120 boasts a straightforward interface, allowing effortless operation by anyone.
- Tailored Sound Control: With adjustable talk-over functions and unique, intuitive tone controls, including a 2-band EQ (Bass: ±12 dB, Treble: ±12 dB), you can fine-tune your audio to perfection.
- Comprehensive Outputs: The amplifier offers output for line out and music only out, with an announcement-only work and a 3-wire volume override, ensuring versatile integration into your existing sound system.
- Reliable Performance: Crafted for consistency, the PLE-1MA120 delivers a frequency response of 50 Hz to 20 kHz +1/-3 dB (at Rated Power -10 dB) with less than 1% distortion at rated power, ensuring high-quality sound reproduction.
Designed for Durability and Convenience:
The Bosch PLE-1MA120 is housed in a tabletop form factor, making it an ideal fit for any setting. It’s engineered for efficiency with a power consumption of 400 VA and a maximum current consumption of 10 A. The package includes everything you need to start, weighing in at 24.55 lb with dimensions of 22.5 x 14.1 x 8.8 inches, ensuring a seamless setup process.
Why the Bosch PLE-1MA120 Plena Mixer Amplifier?
The Bosch PLE-1MA120 Plena Mixer Amplifier is more than just an amplifier; it’s a cost-effective, reliable solution that brings unparalleled clarity and control to your audio installations. Whether for announcements, background music, or emergency paging, the PLE-1MA120 enhances the auditory experience in retail, commercial, and public spaces. Elevate your audio setup with the PLE-1MA120 and ensure your message is always delivered precisely and clearly.
SKU: #0032 -
Pro Audio, Loudspeakers
LC3-UC06E – Ceiling loudspeaker, 6W, spring arms
The LC3-UC06E Ceiling loudspeaker is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt.
Key Features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Unobtrusive design
- EN 54‑24 certified
The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The LC3 Ceiling loudspeaker spring arms, frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.
Check out LC3 Ceiling loudspeaker Price.
Installation and Setup
With built-in spring arms that firmly hold the LC3-UC06E Ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
The LC3-UC06E Ceiling loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
The loudspeaker is equipped with heat-resistant high temperature wire, a thermal fuse, and a ceramic screw-terminal connecting block. holes (11 mm) for two cable glands (20.5 mm) and two rubber grommets (standard provided).
Four primary taps for 100 V are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power and one‑eighth‑power.
The optional back‑box (LC3‑CBB) protects the rear of the loudspeaker from dust, falling objects, makes the unit vermin proof and prevents sound traveling via the ceiling cavity to adjacent areas.
The back‑box is assembled with the loudspeaker by means of a snap‑in construction and has knock‑out holes (11 mm) for two rubber grommets (standard supplied) and for two cable glands (20.5 mm).
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0022 -
Pro Audio, Loudspeakers
Bosch LA1UMx0E1 20 watt Metal Column Loudspeakers
The robust aluminum waterproof enclosure of the Bosch LA1‑UMx0E‑1 20 Watt Metal Column Loudspeakers 20watt power. The speakers reproduce background music effectively and offer a high degree of voice intelligibility. The speakers come complete with an installation guide and a swivel wall mount bracket.
Bosch Column Loudspeakers 20Watt Overview
- Reproduction of background music and clear speech
- In situations when directivity is crucial
- Weatherproof design that is slimline
- Wall-mounting bracket with swivel included as standard
- Robust aluminum construction
- Ability to switch between 8 Ohms and a 70/100 V line
- Provision for the optional line/loudspeaker supervision board can be mounted inside.
- EN 54‑24 certified
- BS 5839‑8 and EN 60849 compliant
Check out our column speaker 20Watt price.
Connections and security
Heat-resistant, high-temperature wire, a thermal fuse, and a ceramic terminal block are all included in the loudspeaker columns. The optional line/loudspeaker supervision board can be mounted internally in the column thanks to this feature.
Loudspeaker power output configuration
The matching transformer that is built-in has four main taps. To enable basic output power setting, the built-in transformer for the speakers is coupled to a rotating variable-tap switch at the rear of the enclosure. Also included on the rotary vary-tap switch is an 8 ohm option.
Alert voice
Voice alarm loudspeakers are made expressly to be used in situations where governmental restrictions govern the operation of public address systems. For voice alarm systems, the LA1-UM20E-1 and LA1-UM40E-1 are intended. Buy Bosch column loudspeakers 20Watt from our store.
Protection
In the case of a fire, the built-in protection in both loudspeaker columns will prevent the associated circuit from failing. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
SKU: #0023 -
Pro Audio, Loudspeakers
LBC3087/41 – Ceiling loudspeaker, 6W, screw mount
An affordable flush-mounting ceiling loudspeaker for general-purpose use is the LBC 3087/41. This full-range loudspeaker is used in retail establishments, department stores, restaurants, offices, sports arenas, hotels, and shops to reproduce speech and music.
A single-piece, 6 W, dual-cone loudspeaker powers the LBC 3087/41. On the rear of the frame is a matching transformer with a voltage of 100 V. The front features an integrated circular metal grille that is painted in a subtle white hue (RAL 9010).
In the case of a fire, the built-in protection in the loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
Key Features
- Suitable for speech and music reproduction
- Screw mounting
- Simple power setting
- EN 54‑24 certified
Installation
The assembly is quickly installed into a hole in the ceiling cavity and secured with three white-colored screws (supplied). A circular template for marking a 165 mm (6.5 in) diameter hole is included with the loudspeaker.
Buy LBC Ceiling loudspeaker 6W now!
Terminal Block
The LBC Ceiling loudspeaker has a three-way terminal block with screw connections suitable for loop-through wiring. Four primary taps are provided on the matching transformer to allow selection of nominal full-power, half-power, quarter-power or eighth power radiation (i.e. in 3 dB steps).
Check out LBC Ceiling loudspeaker Price.
Fire dome
During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).
See LBC Ceiling loudspeaker.
SKU: #0021
There are no reviews yet.