Loudspeakers
Showing 25–33 of 33 results
-
Loudspeakers, Pro Audio
LC1-UM12E8 – Ceiling loudspeaker, 12W, coaxial
LC1-UM12E8 ceiling loudspeaker, 12 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- superb audio quality for both talking and music
- One grille size and one whole set of accessories make installation simple
- options for various ceiling mounting techniques
- Pilot Tone indicator that is optional
- UL2043, UL1480, and EN 54-24 certified
System Overview
Numerous ceiling situations are suitable for the LC1 Modular Ceiling Loudspeaker series. They offer top-notch music and voice for indoor public address applications. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction.
The LC1-MFD or LC1-MFDS enclosure may be used to mount the loudspeaker, which are appropriate for usage in areas where air is handled. The DC-blocking board PM1-LISD and optional monitoring board PRA-EOL can be mounted within the enclosure of the loudspeaker frame.
Check out the LC1 ceiling loudspeaker price.
Functions
Voice alarm applications
Voice alarm loudspeakers are made expressly to be used in buildings where rules control the verbal evacuation notification system’s functioning. The LC1 Modular Ceiling Loudspeaker series complies with British standard BS 5839–8 and is approved EN 54–24 for use in voice alarm systems.
Buy LC1 Ceiling loudspeaker, 12W from OmniSignals now!
Protection
In order to prevent connected circuit failure due to fire damage to the loudspeaker, the loudspeaker is equipped with built-in protection. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeaker in other locations.
To further strengthen the safety of the cable termination, the LC1-UM12E8 ceiling loudspeaker can also be utilized in conjunction with a metal fire-dome.
Connections
The LC1-UM12E8 ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Installation/configuration notes
The LC1 ceiling loudspeaker coaxial range is designed with ease of installation in mind, ensuring a user-friendly experience for seamless integration into diverse environments. The loudspeaker consists of a frame with the loudspeaker driver and metal or ABS grille with integrated light conductor, matching transformer and ceramic screw terminal connection block.
On the loudspeaker are provisions for mounting the optional end-of-line surveillance board and optional DC-blocking board. Power tapping on the 70 V / 100 V matching transformer allows selection of full-power, half power, quarter-power and eight-power radiation.
SKU: #0012 -
Loudspeakers, Pro Audio
LC1-UM24E8 – Ceiling loudspeaker, 24W, coaxial
LC1-UM24E8 ceiling loudspeaker, 24 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Modular Range
The LC1 ceiling loudspeaker coaxial range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
The LC1-UM24E8 ceiling loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
Buy LC1 Ceiling loudspeaker, 24W from OmniSignals now!
Functions
Voice alarm applications
Voice alarm loudspeakers are specifically designed for use in buildings where system performance for verbal evacuation announcements is governed by regulations. The LC1 Modular Ceiling Loudspeaker range is designed for use in voice alarm systems and is EN 54‑24 certified and compliant with British standard BS 5839‑8.
Protection
The LC1-UM24E8 has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
Connections
The LC1-UM24E8 Ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Check out our LC1 Ceiling Loudspeaker Price.
SKU: #0014 -
Loudspeakers, Pro Audio
LC1-WM06E8 – Ceiling loudspeaker, 6W, metal, 4″
LC1-WM06E8 Ceiling loudspeaker, 6 W, integrated circular metal grille, 4-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Numerous ceiling situations may be utilized with the Bosch LC1-WM06E8 Loudspeaker series. They deliver high-quality music and voice for indoor public address systems. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction. It has two very effective 12W and 24W coaxial loudspeaker drivers in addition to three 6W single cone loudspeakers with adjustable opening angles.
They may all be used with the same mounting accessories and have the same grille size. When fitted with the LC1-MFD enclosure, the Bosch LC1-WM06E8 Ceiling Loudspeakers are appropriate for use in air-handling rooms.
Check out LC1 Ceiling loudspeaker Price.
The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board. They may all be used with the same mounting accessories and have the same grille size.
When fitted with the LC1-MFD enclosure, the LC1 Ceiling loudspeaker metal is appropriate for use in air-handling rooms. The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board.
Buy LC1 Ceiling loudspeaker, 6W from our store now!
SKU: #0020 -
Loudspeakers, Pro Audio
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
SKU: #0015 -
Loudspeakers, Pro Audio
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
SKU: #0016 -
Loudspeakers, Pro Audio
LC3-UC06 – Ceiling loudspeaker, 6W
The LC3-UC06 Ceiling loudspeaker is an affordable, all-purpose 6 W ceiling loudspeaker that may be powered by 3, 6, or 1.5 Watts and is compatible with a 100 V supply.
Key features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Optional back-box
- Unobtrusive design
A low impedance (4 Ohm) variant of the ceiling loudspeaker, the LC3-UC06-LZ, may be connected directly to the output of a low impedance amplifier.
The optional back-box LC3-CBB completely shields the loudspeaker from dust and falling items, and it also stops sound from entering adjacent spaces through the ceiling hollow.
As per UL 94V0, the LC3-UC06 Ceiling loudspeaker frame, grill, and back-box are made of self-extinguishing ABS.
Installation
With built-in spring arms that firmly hold the ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
Flying leads are used for the electrical connection, with each hue linked to a separate primary tap on the corresponding transformer. The matching transformer has three primary taps for 100 V, allowing for the selection of nominal full, half, and quarter power.
The optional back-box (LC3-CBB) keeps the loudspeaker safe from dust and falling debris, makes it pest-proof, and stops sound from entering adjacent spaces through the ceiling hollow.
Check out LC3 Ceiling loudspeaker Price.
Certification
The LC3-UC06 Ceiling loudspeaker is built to meet IEC 268‑5 Power Handling Capacity (PHC) specifications, which require them to operate at full power for 100 consecutive hours.
Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees enhanced dependability in harsh circumstances, resulting in increased customer satisfaction, an extended operational lifespan, and a decreased likelihood of malfunction or decline in performance.
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0017 -
Loudspeakers, Pro Audio
LC3-UC06E – Ceiling loudspeaker, 6W, spring arms
The LC3-UC06E Ceiling loudspeaker is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt.
Key Features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Unobtrusive design
- EN 54‑24 certified
The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The LC3 Ceiling loudspeaker spring arms, frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.
Check out LC3 Ceiling loudspeaker Price.
Installation and Setup
With built-in spring arms that firmly hold the LC3-UC06E Ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
The LC3-UC06E Ceiling loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
The loudspeaker is equipped with heat-resistant high temperature wire, a thermal fuse, and a ceramic screw-terminal connecting block. holes (11 mm) for two cable glands (20.5 mm) and two rubber grommets (standard provided).
Four primary taps for 100 V are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power and one‑eighth‑power.
The optional back‑box (LC3‑CBB) protects the rear of the loudspeaker from dust, falling objects, makes the unit vermin proof and prevents sound traveling via the ceiling cavity to adjacent areas.
The back‑box is assembled with the loudspeaker by means of a snap‑in construction and has knock‑out holes (11 mm) for two rubber grommets (standard supplied) and for two cable glands (20.5 mm).
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0022 -
Loudspeakers, Pro Audio
LC5-WC06E4 – Ceiling loudspeaker, 6W, ABS, 2″
The LC5-WC06E4 Ceiling loudspeaker is an extreme compact ceiling loudspeaker, suitable for speech and background music reproduction.
Key Features
- Suitable for speech and music reproduction
- Extreme compact size
- Suitable for use in humidity-, chlorine- and salty environments
- Selectable 70 V ,100 V and 8 Ohm input
- EN 54‑24 certified
Design
The design of the front grille perfectly matches with current available recessed luminaires, integrating light and sound.
The optional back‑box LC5‑CBB fully protects the rear of the loudspeaker from dust and dripping water from above, making the combination IP 44 protected.
The loudspeaker frame, grille and back‑box are manufactured from self‑extinguishing ABS according to UL 94 V 0.
Usage
This LC5-WC06E4 Ceiling loudspeaker is suitable for use in low ceiling applications with low noise level. The small driver used in the unit stands for delivering good sound quality from a small sized unit and provides a wide opening angle for the important frequency octaves.
Fewer loudspeakers are needed to cover a given area, and the noticeable “fading” that occurs as a listener walks from one loudspeaker to another area is eliminated.
The LC5 Ceiling loudspeaker ABS, 2 (with an assembled back‑box) is suitable for use in humidity-, chlorine- and salty environments.
See our LC5 Ceiling loudspeaker Price.
Installation
Installation is easy with two integral leaf springs that securely hold the loudspeaker in its cut‑out. The integral leaf springs can be adjusted in three positions to accommodate ceiling thicknesses from 5 mm to 25 mm.
The size of the ceiling cut‑out opening is standardized on available 3” (76.2 mm) cutting hole saws. No tool required for fitting the loudspeaker into the ceiling cut‑out.
The loudspeaker has built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected.
In this way, system integrity is maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation.
The LC5-WC06E4 Ceiling loudspeaker has ceramic screw‑terminal connection blocks, thermal fuse and heat-resistant high temperature wiring.
Buy LC5 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0018 -
Loudspeakers, Pro Audio
SM 26T – Two-Way Wall Mount Speaker – Black (Pair)
Featuring a proprietary hidden wall mounting method, the Extron SM 26 SpeedMount® Surface Mount Speaker is a two-way speaker. It has a 1″ (25 mm) tweeter and a 6.5″ (165 mm) woofer with dual tuned ports.
The SM 26T Wall Mount Speaker has a broad frequency range of 65 Hz to 19.2 kHz, along with a continuous pink noise output of 60 watts and a continuous program capacity of 120 watts.
The mounting mechanism that is specific to Extron is intended to save money and support division-of-labor installations.
The SM 26T comes in two versions: the 8 ohm variant and the SM 26T version, which can run in the 70 volt and 100 volt modes in addition to the 8 ohm direct mode.
Key Features
- Patented, concealed mounting system
- Includes 0° mounting plate and 10° mounting adapter
- Designed to accommodate division-of-labor installations and save costs
- 6.5″ (165 mm) long-throw woofer with dual tuned bass reflex ports
- 1″ (25 mm) silk dome tweeter
- Two versions available for low impedance or 70/100 volt systems:
- – 8 ohm direct operation only
- – 8 ohm direct and 70/100 volt operation
The SM 26T Wall Mount Speaker Pair slides into the mount and locks into place thanks to the creative mounting technique. To expedite and streamline installation, the speaker’s inbuilt electrical contacts instantly engage with the mounting plate’s pre-wired contacts in the same installation step. The speaker baffle has a release mechanism that makes it easy to take from the mount. Along with the hidden speaker wire connectors, the locked and covert release also works to discourage theft.
Check out SM 26T Wall Mount Speaker Price.
A pivot mount is available as an optional accessory for the SM 26. It allows for 360° of speaker rotation for maximum flexibility in aiming speakers. Pivot mounts are available in black or white to match the SM 26 speaker.
Buy Two-Way Wall Mount Speaker from OmniSignals now!
SKU: #0122
