| TX-8 | |
| Type | Moving Coil Dynamic |
| Frequency Response | 50~16,000 Hz |
| Polar Pattern | Cardioid,rotationally symmetrical about microphone axis, uniform with frequency |
| Sensitivity(at 1,000Hz) | -75dB*(0.18mV)*0dB=1V/μbar |
| Impedance | 600Ω |
| Net Weight | TX-8: 345 grams (cable excluded) |
Microphones, Pro Audio
Compare
JTS TX-8 Dynamic Wired Microphone
1,420 EGP
The JTS TX-7/TX-8 Dynamic Vocal microphone delivers superb performance at a modest cost. The tight cardioid pattern provides excellent off-axis rejection minimizing feedback and undesired background stage noise. The TX-7/TX-8’s internal shock mount greatly reduces handling noise when used in a handheld application or when placed on a Mic stand.
Based on 0 reviews
Be the first to review “JTS TX-8 Dynamic Wired Microphone”
Related products
-
Pro Audio, Loudspeakers
LBC3087/41 – Ceiling loudspeaker, 6W, screw mount
An affordable flush-mounting ceiling loudspeaker for general-purpose use is the LBC 3087/41. This full-range loudspeaker is used in retail establishments, department stores, restaurants, offices, sports arenas, hotels, and shops to reproduce speech and music.
A single-piece, 6 W, dual-cone loudspeaker powers the LBC 3087/41. On the rear of the frame is a matching transformer with a voltage of 100 V. The front features an integrated circular metal grille that is painted in a subtle white hue (RAL 9010).
In the case of a fire, the built-in protection in the loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
Key Features
- Suitable for speech and music reproduction
- Screw mounting
- Simple power setting
- EN 54‑24 certified
Installation
The assembly is quickly installed into a hole in the ceiling cavity and secured with three white-colored screws (supplied). A circular template for marking a 165 mm (6.5 in) diameter hole is included with the loudspeaker.
Buy LBC Ceiling loudspeaker 6W now!
Terminal Block
The LBC Ceiling loudspeaker has a three-way terminal block with screw connections suitable for loop-through wiring. Four primary taps are provided on the matching transformer to allow selection of nominal full-power, half-power, quarter-power or eighth power radiation (i.e. in 3 dB steps).
Check out LBC Ceiling loudspeaker Price.
Fire dome
During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).
See LBC Ceiling loudspeaker.
SKU: #0021 -
Pro Audio, Loudspeakers
LC2-PC30G6-8 – Ceiling loudspeaker, 30W, 8″ Pair
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Mounting
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
Power setting
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
SKU: #0015 -
Pro Audio, Loudspeakers
LC1-WM06E8 – Ceiling loudspeaker, 6W, metal, 4″
LC1-WM06E8 Ceiling loudspeaker, 6 W, integrated circular metal grille, 4-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Numerous ceiling situations may be utilized with the Bosch LC1-WM06E8 Loudspeaker series. They deliver high-quality music and voice for indoor public address systems. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction. It has two very effective 12W and 24W coaxial loudspeaker drivers in addition to three 6W single cone loudspeakers with adjustable opening angles.
They may all be used with the same mounting accessories and have the same grille size. When fitted with the LC1-MFD enclosure, the Bosch LC1-WM06E8 Ceiling Loudspeakers are appropriate for use in air-handling rooms.
Check out LC1 Ceiling loudspeaker Price.
The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board. They may all be used with the same mounting accessories and have the same grille size.
When fitted with the LC1-MFD enclosure, the LC1 Ceiling loudspeaker metal is appropriate for use in air-handling rooms. The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board.
Buy LC1 Ceiling loudspeaker, 6W from our store now!
SKU: #0020 -
Pro Audio, Loudspeakers
Bosch LS1-UC20E-1 Pendant Sphere Loudspeaker, 20W
Bosch Pendant Sphere Loudspeaker known as “sound spheres” are intended to hang from the ceiling via their connecting cords. They are perfect for usage in high-ceilinged facilities like hypermarkets and superstores because of their outstanding sound dispersion.
A powerful Bosch sphere speakers 20w designed for high-quality music and voice reproduction is the LS1-UC20E-1. The cutting edge design complements both classic and modern style settings. It is acceptable to utilize the loudspeaker in voice evacuation systems.
Key Features
- Superb speech and music reproduction
- 5 m connection cable
- Provision for optional safety cord
- Water and dust protected to IP 65
- EN 54‑24 certified
Mounting
The five-meter, five-core connecting cable of the loudspeaker is easily shortened to the required height. It is hanging from the ceiling by this cable. An optional steel safety cord may be fastened for security.
Configuration of Power
A five-meter color-coded, five-core connection cable is included with the Bosch 20w pendant sphere speakers; each color corresponds to a separate primary tap on the corresponding 100 V transformer. This enables the selection of notional full-power, half-power, quarter-power, or eighth-power radiation (in steps of three decibels).
Buy bosch ls1 uc20e 1 now!
Safety Considerations
Like all Bosch products, great effort is taken to ensure that safety regulations are met. All ABS components, as stated in UL 94 V 0, are self-extinguishing. This sound projector conforms with all applicable EN 60065 safety and installation requirements.
See Bosch Pendant Sphere Loudspeaker Price.
Audio Alert Speaker
Voice alarm loudspeakers are made especially for use in buildings where rules control how well verbal communication announcement systems operate. The LS1-UC20E-LS1 is certified EN 54-24, complying with BS 5839-8 and EN 60849. It is intended for usage in voice alarm systems.
The Bosch Pendant Sphere Loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations. A thermal fuse and ceramic terminal block are included with the speakers.
SKU: #0031
There are no reviews yet.