| Audio system | |||
|---|---|---|---|
| Gain | Balanced output: 0 dB, unbalanced output: -6 dB | ||
| Frequency response | 20 Hz to 20 kHz, ±0.2 dB | ||
| THD + Noise | <0.02%, 20 Hz to 20 kHz, at maximum level | ||
| S/N | |||
| Analog In to Analog Out | >109 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted) | ||
| Analog In to Digital Out | 110 dB, 20 Hz to 20 kHz, at full-scale output (unweighted) | ||
| Digital In to Analog Out | 115 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted) | ||
| Crosstalk | <-90 dB @ 20 Hz to 20 kHz, fully loaded | ||
| Volume control | -100 dB to 0 dB (control 0 to 100 in 0.1 dB steps) | ||
| Audio input | |||
| Number/signal type | 6 mono (or 3 stereo), mic/line, balanced/unbalanced, 6 with phantom power | ||
| Connectors | (3) 3.5 mm captive screw, 6 pole, mono, balanced/unbalanced | ||
| Impedance | >10k ohms balanced/unbalanced | ||
| Nominal level | -60 dBV, +4 dBu, -10 dBV adjustable via input gain | ||
| Maximum level | +21 dBu at rated THD+N when mic gain is set to 0 dB | ||
| Equivalent input noise | <-120 dBV (1 µVrms) at 40 dB input gain | ||
| CMRR | >60 dB typical | ||
| Input gain adjustment | -18 dB to +80 dB in 0.1 dB steps, adjustable per input | ||
| DC phantom power | +48 VDC, ±10% (inputs 1-6) can be switched on or off per input | ||
|
|||
| Audio output | |||
| Number/signal type | 4 mono (or 2 stereo), line, balanced/unbalanced | ||
| Connectors | (2) 3.5 mm captive screw, 6 pole, mono, balanced/unbalanced | ||
| Impedance | 100 ohms balanced, 50 ohms unbalanced | ||
| Gain error | ±0.1 dB channel to channel | ||
| Maximum level (Hi-Z) | >+21 dBu balanced, >+15 dBu unbalanced | ||
| Audio processing | |||
| A/D, D/A conversion | 24-bit, 48 kHz | ||
| AEC tail length | >200 msec | ||
| AEC convergence | Up to 60 dB/sec | ||
| Noise cancellation | Up to 20 dB, software selectable | ||
| EXP port | |||
| Transmission type | Proprietary | ||
| Connector | 1 RJ-45 | ||
| Inputs | 16 channels Rx | ||
| Outputs | 16 channels Tx | ||
| Audio format | Uncompressed, 24-bit, 48 kHz | ||
| EXP cable | Shielded CAT6 up to 10 meters (1 foot cable included) | ||
| USB audio port | |||
| Connector | 1 rear panel USB mini-B | ||
| USB standards | USB 2.0, high speed | ||
| AT Ports (DMP 64 Plus AT models only) — audio transport | |||
| Transmission | Dante/AES-67, software selectable | ||
| Connectors | 2 RJ-45, 2-port 1 Gbps switch to Dante interface | ||
| Inputs | 32 channels Rx | ||
| Outputs | 16 channels Tx | ||
| Audio format | Uncompressed, 24-bit, 48 kHz | ||
| Latency | Deterministic, based on user selections: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms | ||
| VoIP Port (DMP 64 Plus V models only) | |||
| Connector | 1 RJ-45 | ||
| Data rate | 10/100/1000 Base-T | ||
| Signaling protocol | Session Initiation Protocol (SIP), RFC 3261 and related RFCs | ||
| Discovery protocol | LLDP-MED (optional) | ||
| Lines | Up to 8 concurrent, independent extensions | ||
| Codec support | Various ITU, including wideband | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.1.254 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Control/remote | |||
| Serial host control port | 1 bidirectional RS-232, 3.5 mm captive screw, 3 pole | ||
| Baud rate and protocol | 38400 baud, 8 data bits, 1 stop bit, no parity | ||
| Pin configuration | 1 = Tx, 2 = Rx, 3 = G | ||
| USB control port | 1 front panel USB mini-B | ||
| USB standards | USB 2.0, high speed | ||
| ACP control port | (1) 3.5 mm captive screw, 4 pole, supports up to 8 panels | ||
| Pin configuration | 1 = +12V, 2 = +S, 3 = -S, 4 = G | ||
| Power supply | 6 Watts max | ||
| Digital I/O | (6) 3.5 mm captive screw, 6 pole (shared with audio input) | ||
| Pin configuration | 1 = In, 2 = G, 3 = Out 1 | ||
| Voltage range | Input = 0V to +12V Output = 0V (low), 5V (high) Software programmable |
||
| Ethernet host port | 1 RJ-45 | ||
| Data rate | 10/100/1000 Base-T | ||
| Protocol | ARP, ICMP, IEEE 802.1X, IP, TCP, DHCP, HTTPS, Telnet, SSH | ||
| Default settings | Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off |
||
| Web server | Up to 200 simultaneous sessions | ||
| Program control | Extron DSP Configurator control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer®, Telnet |
||
| General | |||
| Power supply | External Input: 100-240 VAC, 50-60 Hz |
||
| Power input requirements | 12 VDC or Power over Ethernet Plus (PoE Plus IEEE 802.3at) | ||
| DMP 64 Plus C — power consumption | |||
| Power supply (PS 1220) | |||
| Device | 15.0 watts | ||
| Device and power supply | 16.7 watts | ||
| DMP 64 Plus C — thermal dissipation | |||
| Power supply (PS 1220) | |||
| Device | 38.9 BTU/Hr | ||
| Device and power supply | 44.6 BTU/Hr | ||
| DMP 64 Plus C AT — power consumption | |||
| Power injector (PI 140) | |||
| Device | 17.6 watts | ||
| Device and power injector | 23.6 watts | ||
| PoE+ PSE | |||
| Device | 21.8 watts | ||
| Power supply (PS 1220) | |||
| Device | 18.2 watts | ||
| Device and power supply | 19.6 watts | ||
| DMP 64 Plus C AT — thermal dissipation | |||
| Power injector (PI 140) | |||
| Device | 49.7 BTU/Hr | ||
| Device and power injector | 70.2 BTU/Hr | ||
| PoE+ PSE | |||
| Device | 57.2 BTU/Hr | ||
| Power supply (PS 1220) | |||
| Device | 48.2 BTU/Hr | ||
| Device and power supply | 52.7 BTU/Hr | ||
| DMP 64 Plus C V — power consumption | |||
| Power supply (PS 1220) | |||
| Device | 15.6 watts | ||
| Device and power supply | 17.4 watts | ||
| DMP 64 Plus C V — thermal dissipation | |||
| Power supply (PS 1220) | |||
| Device | 39.1 BTU/Hr | ||
| Device and power supply | 45.4 BTU/Hr | ||
| DMP 64 Plus C V AT — power consumption | |||
| Power injector (PI 140) | |||
| Device | 18.1 watts | ||
| Device and power injector | 23.8 watts | ||
| PoE+ PSE | |||
| Device | 21.7 watts | ||
| Power supply (PS 1220) | |||
| Device | 18.6 watts | ||
| Device and power supply | 20.4 watts | ||
| DMP 64 Plus C V AT — thermal dissipation | |||
| Power injector (PI 140) | |||
| Device | 51.4 BTU/Hr | ||
| Device and power injector | 70.8 BTU/Hr | ||
| PoE+ PSE | |||
| Device | 57.6 BTU/Hr | ||
| Power supply (PS 1220) | |||
| Device | 47.3 BTU/Hr | ||
| Device and power supply | 53.5 BTU/Hr | ||
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Cooling | Fan, front to back, fixed speed | ||
| Mounting | |||
| Rack mount | Yes, with optional 1U rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7″ H x 8.7″ W x 9.5″ D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 24.1 cm D) |
||
| Product weight | 2.35 lbs | ||
| Regulatory compliance | CE, c-UL, UL, CE, C-Tick, FCC Class A, ICES, RoHS, VCCI, WEEE, KC | ||
| Warranty | 3 years parts and labor | ||
|
|||
|
|||
Audio Devices, Pro Audio
Compare
EXTRON-DMP 64 PLUS C AT-6X4 60-1823-10
Availability:
7 in stock
199,410 EGP
7 in stock
Introducing the DMP 64 PLUS Audio Amplifier, a cutting-edge audio solution meticulously engineered to cater to the intricate needs of modern audio environments. This versatile amplifier stands out with its comprehensive features and certifications, making it an indispensable tool for professionals seeking exceptional audio quality and seamless integration in various settings.
Key Features:
- Versatile Input and Output Configuration: Equipped with 6 mic/line inputs and 4 line outputs, the DMP 64 PLUS offers flexibility to accommodate a range of audio setups.
- Advanced Acoustic Echo Cancellation: Features six channels of AEC, ensuring crystal-clear audio without echoes, enhancing communication and presentation quality.
- Certifications for Leading Platforms: Fully certified for Microsoft Teams and Zoom Rooms and verified with Logitech RoomMate, ensuring optimal compatibility and performance in video conferencing environments.
- USB Audio Interface: A configurable USB audio interface allows straightforward connectivity to computer-based codecs and playback sources, with customizable input/output configurations for tailored audio routing.
- Dante Audio Networking: The AT models support Dante audio networking, integrating seamlessly with Dante Domain Manager and offering AES67 support for extensive audio networking capabilities.
- VoIP Support: The V models incorporate up to eight VoIP lines, providing robust connectivity for voice-over IP communications.
- Compact and Efficient Design: Designed in a compact half-rack size, it saves space while delivering powerful audio performance.
Enhanced Features:
- FlexInput Technology: All main inputs feature FlexInput capability, allowing for versatile selection between Dante channels, expansion inputs, or local mic/line inputs.
- PoE+ Powered AT Models: Select models can be powered via PoE+, simplifying installation and reducing cabling complexity.
- Intuitive Control Panels: Optional ACP Series audio control panels offer direct, user-friendly audio control for setups that do not require a full control system.
- Sophisticated Audio Processing: Advanced processing on all outputs ensures superior sound quality, with extensive mix matrixing for precise audio routing and mixing.
Advanced Functionality:
- Low Latency Performance: Engineered with powerful DSP chips to minimize latency, ensuring audio remains synchronized with video, which is crucial for seamless presentations and performances.
- Adaptive Gain Processing: Features an adaptive gain processor to one level, maintaining automatically balanced audio during conferences automatically.
- Built-in Gigabit Switch: Includes a two-port Gigabit switch for daisy-chaining with other Dante-enabled devices, supporting redundant operation for enhanced reliability.
- Expansion Capabilities: A digital audio expansion port is offered, enabling linkage with another DMP Plus unit or Extron DTP CrossPoint matrix switchers for expanded audio routing options.
Professional Software Support:
- ProDSP Software: Comes with DSP Configurator Software, a powerful tool for managing audio operations, offering an intuitive graphical user environment for easy configuration and optimization.
- Versatile Preset Options: Supports up to 32 DSP Configurator presets, allowing for efficient setup and customization of audio processing, routing, and levels.
Reliability and Compliance:
- External Extron Everlast™ Power Supply: Includes a reliable Extron Everlast power supply, known for its high reliability and low power consumption, with a 7-year warranty for peace of mind.
- TAA Compliance: Available in a TAA Compliant version upon request, meeting government and institutional procurement requirements.
The DMP 64 PLUS Audio Amplifier embodies the pinnacle of audio amplification technology, offering unparalleled flexibility, crystal-clear audio quality, and robust connectivity options. It is ideal for professionals demanding the best in audio conferencing, presentations, and complex audio setups.
Based on 0 reviews
Be the first to review “EXTRON-DMP 64 PLUS C AT-6X4 60-1823-10”
Related products
-
Pro Audio, Loudspeakers
LBC3481/12 – Horn loudspeaker, 10W, 6″
The LBC3481/12 Horn loudspeaker is a circular horn loudspeaker. 10 W, and made from ABS. Bosch high-efficiency horn loudspeakers provide excellent speech reproduction and sound distribution for a wide scope of outdoor applications. They are ideal for sports grounds, parks, exhibitions, factories and swimming pools.
Key Features
- High efficiency drivers
- Wide opening angle
- Excellent speech reproduction
- Simple power setting
- Water- and dust protected to IP 65
- Versatile mounting bracket
- Complies with international installation and safety regulations
Perfect for direct connection to a 100 V line output and are finished in light gray (RAL 7035). The horns are water and dust protected.
LBC3481/12 Horn loudspeaker includes a 100 V transformer with taps on the primary winding to allow different power settings. Nominal full-power, half-power or quarter-power radiation (in 3 dB steps) can easily be selected by connecting the amplifier output to the appropriate tap. A 2 m four-core cable is fitted to the horns. Each core is a different color, and is connected to one of the primary taps on the transformer.
Check out LBC Horn loudspeaker Price.
This model’s combination of robust design, efficient sound distribution, and user-friendly features make it an excellent choice for anyone seeking a high-quality, durable outdoor loudspeaker. The Bosch LBC3481/12 Horn Loudspeaker is not just a product; it’s a reliable partner for delivering exceptional audio experiences in the great outdoors.
The horn loudspeakers are supplied complete with sturdy adjustable mounting brackets, allowing the sound beam to be accurately directed.
Buy LBC3481/12 Horn loudspeaker 10W now!
SKU: #0025 -
Pro Audio, Loudspeakers
LBC3087/41 – Ceiling loudspeaker, 6W, screw mount
An affordable flush-mounting ceiling loudspeaker for general-purpose use is the LBC 3087/41. This full-range loudspeaker is used in retail establishments, department stores, restaurants, offices, sports arenas, hotels, and shops to reproduce speech and music.
A single-piece, 6 W, dual-cone loudspeaker powers the LBC 3087/41. On the rear of the frame is a matching transformer with a voltage of 100 V. The front features an integrated circular metal grille that is painted in a subtle white hue (RAL 9010).
In the case of a fire, the built-in protection in the loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
Key Features
- Suitable for speech and music reproduction
- Screw mounting
- Simple power setting
- EN 54‑24 certified
Installation
The assembly is quickly installed into a hole in the ceiling cavity and secured with three white-colored screws (supplied). A circular template for marking a 165 mm (6.5 in) diameter hole is included with the loudspeaker.
Buy LBC Ceiling loudspeaker 6W now!
Terminal Block
The LBC Ceiling loudspeaker has a three-way terminal block with screw connections suitable for loop-through wiring. Four primary taps are provided on the matching transformer to allow selection of nominal full-power, half-power, quarter-power or eighth power radiation (i.e. in 3 dB steps).
Check out LBC Ceiling loudspeaker Price.
Fire dome
During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).
See LBC Ceiling loudspeaker.
SKU: #0021 -
Pro Audio, Power Amplifiers
Bosch PLE-2MA120-EU – Priority mixer amplifier, 2-zone, 120W
Introducing the Bosch PLE-2MA120 Plena Mixer Amplifier, a sophisticated solution designed for versatile 2-zone operations and high-output power needs in background audio PA and commercial audio installations. With its robust 120 watts of power, this amplifier is engineered to deliver crisp, clear sound across various settings, including retail stores, commercial offices, and halls.
Key Features:
- Versatile Zone Operations: Equipped with two zones, each featuring Euro-style pluggable screw terminal connectors for 70V, 25V, and 4 Ohms taps, allowing for flexible speaker configurations.
- Comprehensive Input Options: The PLE-2MA120 offers six microphone/line inputs alongside three music source inputs, ensuring compatibility with a wide range of audio sources. It also includes a 100V telephone and a call station input with priority & VOX for seamless integration into existing PA systems.
- Enhanced Voice Clarity: With a dedicated announcement channel, voice-activated emergency override, and built-in 2-tone chime (expandable to 7 more with an optional call station), this amplifier ensures clear communication in critical situations.
- Superior Sound Quality: The frequency response ranges from 50 Hz to 20 kHz, providing a broad spectrum for audio playback. It also boasts a dynamic range of 100 dB and low distortion levels (< 1% at rated power), ensuring high-quality sound reproduction.
- Advanced Signal Processing: Includes separate tone controls for microphones and music sources, bass and treble adjustability of ±12 dB, and a high-pass filter set at 315 Hz, offering precise sound customization.
- Reliable Power Supply: The unit can operate on AC (115 to 230 VAC) and DC (24 VDC) power sources, with a built-in 24V charger for backup power, ensuring uninterrupted operation.
- User-Friendly Interface: Designed for ease of use, the PLE-2MA120 features straightforward controls, making it accessible for all skill levels.
- Durable and Practical Design: With dimensions of 16.9 x 3.9 x 10.6 inches and weighing 23.1 lb, this amplifier is built for durability without compromising on practicality. The unit’s design ensures it integrates seamlessly into a variety of settings.
The Bosch PLE-2MA120 Plena Mixer Amplifier stands out as a cost-effective, ideal solution for enhancing audio systems in commercial environments. Its powerful performance, flexible connectivity, and user-friendly features make it a top choice for professionals seeking reliability and quality in audio installations.
SKU: #0033 -
Pro Audio, Loudspeakers
LC3-UC06 – Ceiling loudspeaker, 6W
The LC3-UC06 Ceiling loudspeaker is an affordable, all-purpose 6 W ceiling loudspeaker that may be powered by 3, 6, or 1.5 Watts and is compatible with a 100 V supply.
Key features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Optional back-box
- Unobtrusive design
A low impedance (4 Ohm) variant of the ceiling loudspeaker, the LC3-UC06-LZ, may be connected directly to the output of a low impedance amplifier.
The optional back-box LC3-CBB completely shields the loudspeaker from dust and falling items, and it also stops sound from entering adjacent spaces through the ceiling hollow.
As per UL 94V0, the LC3-UC06 Ceiling loudspeaker frame, grill, and back-box are made of self-extinguishing ABS.
Installation
With built-in spring arms that firmly hold the ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
Flying leads are used for the electrical connection, with each hue linked to a separate primary tap on the corresponding transformer. The matching transformer has three primary taps for 100 V, allowing for the selection of nominal full, half, and quarter power.
The optional back-box (LC3-CBB) keeps the loudspeaker safe from dust and falling debris, makes it pest-proof, and stops sound from entering adjacent spaces through the ceiling hollow.
Check out LC3 Ceiling loudspeaker Price.
Certification
The LC3-UC06 Ceiling loudspeaker is built to meet IEC 268‑5 Power Handling Capacity (PHC) specifications, which require them to operate at full power for 100 consecutive hours.
Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees enhanced dependability in harsh circumstances, resulting in increased customer satisfaction, an extended operational lifespan, and a decreased likelihood of malfunction or decline in performance.
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0017
There are no reviews yet.