2,450 EGP
The Bosch LBC 2900/20 is a handheld cardioid dynamic microphone with a 23′ XLR microphone cable designed for reliable reproduction of vocals and speech in karaoke, clubs, public address, and conferences. Its dynamic element requires no power source and delivers a frequency response of 80 Hz to 12 kHz with a generous presence boost for enhanced vocal intelligibility. The cardioid polar pattern rejects sound behind the mic, yielding high immunity to feedback and decreased pickup of room ambience.
Internal shielding protects against pops and wind noise while the durable casing delivers road-ready toughness. An on/off switch is provided for convenient muting of the mic between speeches or performances. The XLR 3-pin output ensures compatibility with most microphone preamps and mixer inputs. The LBC 2900/20 also includes a quick-release microphone clamp and a storage box.
Ideal for vocals and public address
Cardioid polar pattern provides enhanced off-axis rejection and high gain before feedback
80 Hz to 12 kHz frequency response with a strong presence boost
Rugged construction grants tour-worthy durability
XLR 3-pin connector for compatibility with most microphone preamps
On/off switch allows convenient muting between periods of use
Includes 23′ XLR microphone cable for easy connectivity with a mixer or portable PA system
Non-reflective dark gray finish
| Form Factor | |
| Element Type | |
| Polar Pattern | |
| Frequency Range |
| Form Factor | |
| Sound Field | |
| Operating Principle | |
| Element Type | |
| Polar Pattern | |
| Circuitry | |
| Windscreen |
| Frequency Range | |
| Sensitivity |
| Cable Length |
| Mounting Thread Size | |
| Included Filters | |
| Operating Temperature | |
| Operating Humidity | |
| Storage Temperature |
| Package Weight | |
| Box Dimensions (LxWxH) |
LC1-UM24E8 ceiling loudspeaker, 24 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
The LC1 ceiling loudspeaker coaxial range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
The LC1-UM24E8 ceiling loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
Buy LC1 Ceiling loudspeaker, 24W from OmniSignals now!
Voice alarm loudspeakers are specifically designed for use in buildings where system performance for verbal evacuation announcements is governed by regulations. The LC1 Modular Ceiling Loudspeaker range is designed for use in voice alarm systems and is EN 54‑24 certified and compliant with British standard BS 5839‑8.
The LC1-UM24E8 has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
The LC1-UM24E8 Ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Check out our LC1 Ceiling Loudspeaker Price.
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
Bosch Pendant Sphere Loudspeaker known as “sound spheres” are intended to hang from the ceiling via their connecting cords. They are perfect for usage in high-ceilinged facilities like hypermarkets and superstores because of their outstanding sound dispersion.
A powerful Bosch sphere speakers 20w designed for high-quality music and voice reproduction is the LS1-UC20E-1. The cutting edge design complements both classic and modern style settings. It is acceptable to utilize the loudspeaker in voice evacuation systems.
The five-meter, five-core connecting cable of the loudspeaker is easily shortened to the required height. It is hanging from the ceiling by this cable. An optional steel safety cord may be fastened for security.
A five-meter color-coded, five-core connection cable is included with the Bosch 20w pendant sphere speakers; each color corresponds to a separate primary tap on the corresponding 100 V transformer. This enables the selection of notional full-power, half-power, quarter-power, or eighth-power radiation (in steps of three decibels).
Buy bosch ls1 uc20e 1 now!
Like all Bosch products, great effort is taken to ensure that safety regulations are met. All ABS components, as stated in UL 94 V 0, are self-extinguishing. This sound projector conforms with all applicable EN 60065 safety and installation requirements.
See Bosch Pendant Sphere Loudspeaker Price.
Voice alarm loudspeakers are made especially for use in buildings where rules control how well verbal communication announcement systems operate. The LS1-UC20E-LS1 is certified EN 54-24, complying with BS 5839-8 and EN 60849. It is intended for usage in voice alarm systems.
The Bosch Pendant Sphere Loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations. A thermal fuse and ceramic terminal block are included with the speakers.
There are no reviews yet.