-15%
Microphones, Pro Audio
Compare
Beyerdynamic TG 500H-D 518-548 MHz HANDHELD
Availability:
Out of stock
8,915 EGP 10,485 EGP
Out of stock
The new Beyerdynamic TG 500H series handheld transmitters feature an exceptionally pleasant touch and feel, a solid grip, and a flawlessly balanced sensation in the hand. It is possible to switch between 10 mW and 50 mW of transmission Beyerdynamic power.
Practical circumstances are enhanced by the handheld’s low weight (230 g). Through infrared synchronization, settings are readily configured on the receivers and immediately sent to the transmitters.
For more information, check out the Beyerdynamic TG 500H manual.
Features
- Outstandingly pleasant touch and feel and programmable power lock
- Dynamic TG V50 capsule
- Infra-Red synchronization for relaying settings from receiver to transmitter
- LC-Display
- 2-level Gain- Switch
- Programmable Mute- Button
- Battery charge level display
- Battery life time approx. 10 hours with 2 x 1,5 V AA batteries
- Up to 120 m working range
- Synchronization of receiver and transmitter below one second
- Charging Contacts for WA-CD
- Removable belt clips for horizontal & vertical mounting
- Pilot tone function
- Incl. batteries and bag
Battery
When the battery is about to run low, the inbuilt pilot tone feature alerts you and guarantees interference-free transmission. Every Beyerdynamic TG 500H transmitter has a programmable mute button and an LC display.
Ten hours of battery life ensures continuous functioning, even during long events. Alternatively, the transmitters may be powered by regular NiMH batteries, which can be charged without taking them out of the devices by utilizing the optional WA-CD charging port.
See our Beyerdynamic TG 500H price.
Specifications
Frequency range
- 518 – 548 MHz
- Transmission range: up to 120 m (line of sight)
- Number of the simultaneously active channels: max. 72 (when using all 4 bands)
- Audio frequency response: 45 – 15 kHz
- Audio dynamic range: 106 dB (A-weighted)
- Operating principle: Analogue wireless microphone system with diversity receiver
UHF handheld transmitter
- Display: LCD
- Power supply: 2 x AA NiMH or 2 x 1.5 V alkaline batteries
- Operating time: approx. 10 hrs.
- Ambient temperature: 0 to +55 °C
- Transmitting power: 10 mW / 50 mW
Dimensions
- Length with microphone capsule: 263 mm
- Shaft diameter: 36 mm
- Capsule diameter: 53 mm
- Weight (without batteries): 230 g
Related products
-
Pro Audio, Power Amplifiers
Bosch PLE-2MA240-EU – Priority mixer amplifier, 2-zone, 240W
The Bosch PLE-2MA240-EU amplifier stands out as an exemplary solution for public address and commercial audio installations. Designed for 2-zone operations, this 240-watt amplifier is perfect for environments like retail stores, commercial offices, and halls, where clear and distributed sound is essential.
Powerful Performance and Versatility
At the heart of the PLE-2MA240-EU lies a robust 240-watt amplifier capable of delivering crisp and clear audio in even the most demanding environments. With the flexibility to operate in 2 zones, each zone can be independently controlled and is compatible with 70V, 25V, or 4-ohm speaker loads. This makes the PLE-2MA240-EU exceptionally versatile and suitable for various applications.
Advanced Connectivity
The amplifier boasts an impressive array of inputs, including six microphone/line inputs and three additional inputs for music sources. This ensures that it can handle virtually any audio source you need to connect. Furthermore, it features 100V inputs, telephone inputs, and a specialized call station input with priority and VOX (voice-activated) override, ensuring that essential announcements can be made clearly and at a moment’s notice.
User-Friendly Interface
Designed with simplicity, the PLE-2MA240-EU features an intuitive interface that makes it straightforward for anyone to operate. The dedicated announcement channel and Euro-style pluggable screw terminals ensure easy setup and reliable performance.
Enhanced Audio Control
The PLE-2MA240-EU goes beyond basic amplification with its adjustable talk-over function, which automatically lowers the volume of background music during paging, ensuring announcements are heard clearly. Separate tone controls for microphones and music sources allow for fine-tuning of the audio output to match the specific requirements of any space.
Emergency and Paging Features
In critical situations, the voice-activated emergency override feature takes precedence, ensuring that emergency announcements are broadcast immediately and without fail. The built-in 2-tone chime, with the option to expand to 7 additional tones via a call station, adds a professional touch to paging and announcements.
Reliability and Durability
Understanding the importance of reliability in commercial settings, Bosch has equipped the PLE-2MA240-EU with a 24V backup input, complete with a built-in charger, ensuring uninterrupted operation even during power outages. The durable construction and high-quality components guarantee long-term reliability and performance.
The Bosch PLE-2MA240-EU amplifier is more than just an amplifier; it’s a comprehensive audio solution designed for the complexities of modern commercial environments. Whether you’re looking to enhance the shopping experience in a retail store, improve communication in a bustling office, or ensure clarity of announcements in a public hall, the PLE-2MA240-EU stands ready to deliver exceptional audio quality, reliability, and ease of use. Its power, flexibility, and user-friendly features make it a cost-effective choice for any organization seeking to upgrade its audio capabilities.
SKU: #0034 -
Pro Audio, Loudspeakers
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
SKU: #0016 -
Pro Audio, Loudspeakers
LC3-UC06 – Ceiling loudspeaker, 6W
The LC3-UC06 Ceiling loudspeaker is an affordable, all-purpose 6 W ceiling loudspeaker that may be powered by 3, 6, or 1.5 Watts and is compatible with a 100 V supply.
Key features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Optional back-box
- Unobtrusive design
A low impedance (4 Ohm) variant of the ceiling loudspeaker, the LC3-UC06-LZ, may be connected directly to the output of a low impedance amplifier.
The optional back-box LC3-CBB completely shields the loudspeaker from dust and falling items, and it also stops sound from entering adjacent spaces through the ceiling hollow.
As per UL 94V0, the LC3-UC06 Ceiling loudspeaker frame, grill, and back-box are made of self-extinguishing ABS.
Installation
With built-in spring arms that firmly hold the ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
Flying leads are used for the electrical connection, with each hue linked to a separate primary tap on the corresponding transformer. The matching transformer has three primary taps for 100 V, allowing for the selection of nominal full, half, and quarter power.
The optional back-box (LC3-CBB) keeps the loudspeaker safe from dust and falling debris, makes it pest-proof, and stops sound from entering adjacent spaces through the ceiling hollow.
Check out LC3 Ceiling loudspeaker Price.
Certification
The LC3-UC06 Ceiling loudspeaker is built to meet IEC 268‑5 Power Handling Capacity (PHC) specifications, which require them to operate at full power for 100 consecutive hours.
Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees enhanced dependability in harsh circumstances, resulting in increased customer satisfaction, an extended operational lifespan, and a decreased likelihood of malfunction or decline in performance.
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0017 -
Pro Audio, Loudspeakers
LC1-WM06E8 – Ceiling loudspeaker, 6W, metal, 4″
LC1-WM06E8 Ceiling loudspeaker, 6 W, integrated circular metal grille, 4-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Numerous ceiling situations may be utilized with the Bosch LC1-WM06E8 Loudspeaker series. They deliver high-quality music and voice for indoor public address systems. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction. It has two very effective 12W and 24W coaxial loudspeaker drivers in addition to three 6W single cone loudspeakers with adjustable opening angles.
They may all be used with the same mounting accessories and have the same grille size. When fitted with the LC1-MFD enclosure, the Bosch LC1-WM06E8 Ceiling Loudspeakers are appropriate for use in air-handling rooms.
Check out LC1 Ceiling loudspeaker Price.
The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board. They may all be used with the same mounting accessories and have the same grille size.
When fitted with the LC1-MFD enclosure, the LC1 Ceiling loudspeaker metal is appropriate for use in air-handling rooms. The loudspeaker frame comes with a light conductor that is standard to display the pilot-tone status and space for attaching an optional pilot-tone indicator board or WLS board.
Buy LC1 Ceiling loudspeaker, 6W from our store now!
SKU: #0020
There are no reviews yet.