| Audio | |||
|---|---|---|---|
| Gain | Unity when internal jumpers are set to match output wiring. See the table below for other conditions. | ||
 |
|||
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB (with voltage reference @ 1 kHz) | ||
| THD + Noise | 0.03% @ 1 kHz at nominal level | ||
| S/N | >90 dB, unbalanced/balanced, at maximum output (unweighted) | ||
| Stereo channel separation | >80 dB @ 1 kHz, >60 dB @ 20 kHz | ||
| CMRR | >75 dB @ 20 Hz to 20 kHz | ||
| Output cable driving distance | Up to 1000 feet with STP 22 cable | ||
| Audio input | |||
| Number/signal type | 1 stereo, balanced/unbalanced | ||
| Connector | (1) 3.5 mm captive screw connector, 5 pole | ||
| Impedance | >18k ohms unbalanced, >24k ohms balanced, DC coupled | ||
| Nominal level | Compatible with +4 dBu (1.23 Vrms), 0 dBu (0.775 Vrms), -10 dBV (316 mVrms), -20 dBV (100 mVrms) | ||
| Maximum level | +24 dBu, (balanced) at 1%THD+N | ||
|
|||
| Audio output | |||
| Number/signal type | 6 stereo, balanced/unbalanced | ||
| Connectors | (6) 3.5 mm captive screw connectors, 5 pole | ||
| Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
| Maximum level (Hi-Z) | >+24 dBu, balanced at 1%THD+N | ||
| Maximum level (600 ohm) | >+15 dBm, balanced at 1%THD+N | ||
| General | |||
| Power | 100 VAC to 240 VAC, 50-60 Hz, 8 watts, internal | ||
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
| Mounting | |||
| Rack mount | Yes, with optional 1U deep rack shelf | ||
| Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit | ||
| Enclosure type | Metal | ||
| Enclosure dimensions | 1.7″ H x 8.7″ W x 6.0″ D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
| Product weight | 2 lbs (0.9 kg) | ||
| Shipping weight | 4 lbs (2 kg) | ||
| Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Regulatory compliance | |||
| Safety | CE, c-UL, UL | ||
| EMI/EMC | CE, C-tick, FCC Class A, VCCI, ICES | ||
| MTBF | 30,000 hours | ||
| Product warranty | 3 years parts and labor | ||
| Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
Based on 0 reviews
Be the first to review “DA 6A – Audio Distribution Amplifier”
Related products
-
Pro Video, Routers & Switchers
SW4 USB – USB Switcher
Features
- Outputs: Four female USB type A connectors
- USB 2.0 compatible — Supports 480 Mbps high speed communications and is backwards compatible with all prior USB versions.
- Four port output hub with 5V, 500mA available on each output — Allows simultaneous connection to multiple peripheral devices such as mass storage devices, keyboards, mice, or other HID – Human Interface Devices. Attached devices can be powered via the provided 5V, 500mA available on each output.
- Port Status LEDs — Provides visual indication of port activity for enumerated peripherals and all connected and active host devices.
- Multiple control points — Operation via front panel, RS-232, and contact closure offers integration flexibility into a variety of control environments.
- RS-232 pass-through — Reduces RS-232 control port requirements by processing SIS commands within the SW USB while also passing them through to other controllable Extron video switchers.
- Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel.
- Rack-mountable, 1U half rack width metal enclosure
The Extron SW4 USB Plus are four-input USB switchers that allow switching between multiple host devices and multiple USB peripherals. They provide integrator-friendly solutions for implementing USB 2.0 compatible switching in professional AV environments. A number of specialized features help further streamline integration, such as: port status indication, RS-232 pass-through, front panel security lockout, and multiple control points. The SW4 USB Plus model features Host and Peripheral Emulation Mode, which provides “keep alive” functionality by continuously mimicking host and keyboard/mouse communications within the switcher. This emulation eliminates the need for enumeration, and reduces the chance of failed device communications throughout the switching process.
SKU: #0146
There are no reviews yet.