| Video | |||||||||||||||||||||||||||||||||
| Input Signal Type | HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support[1] (DVI & Dual-Mode DisplayPort compatible[2]) | ||||||||||||||||||||||||||||||||
| Output Signal Type | HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support[1] (DVI compatible[2]) | ||||||||||||||||||||||||||||||||
| Copy Protection | Selectable for HDCP 2.2, HDCP 1.4, or HDCP disabled | ||||||||||||||||||||||||||||||||
Maximum Resolutions
NOTE: Common resolutions are shown; other resolutions are supported at pixel clock rates up to 600 MHz |
|||||||||||||||||||||||||||||||||
| Audio | |||||||||||||||||||||||||||||||||
| Input Signal Type | HDMI (Dual-Mode DisplayPort compatible[2]) | ||||||||||||||||||||||||||||||||
| Output Signal Type | HDMI | ||||||||||||||||||||||||||||||||
| Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels | ||||||||||||||||||||||||||||||||
| Communications | |||||||||||||||||||||||||||||||||
| USB | USB 2.0 host; supports firmware update and custom EDID upload via a USB flash drive | ||||||||||||||||||||||||||||||||
| HDMI | HDCP & EDID (does not pass CEC) | ||||||||||||||||||||||||||||||||
| HDCP Version | Selectable for HDCP 2.2, 1.4, or OFF; HDCP encrypted content is blanked in OFF mode |
||||||||||||||||||||||||||||||||
| EDID Mode | Selectable for DEFAULT or COPY 1ST; • The factory default EDID is 4K60 4:4:4 non-HDR video with 2-channel LPCM audio; • The factory default EDID can be replaced with a custom EDID via USB; • Sliding the switch from DEFAULT to COPY 1ST copies and stores the EDID from the device at OUTPUT 1 and passes it to the INPUT source device; • Sliding the switch from COPY 1ST to DEFAULT erases the stored EDID and uses the factory default or custom EDID; Note: Changing the device at OUTPUT 1 will not update the stored EDID until the switch is moved to DEFAULT and back to COPY 1ST |
||||||||||||||||||||||||||||||||
| Connectors | |||||||||||||||||||||||||||||||||
| INPUT | (1) HDMI Type A connector, female; HDMI digital video/audio input[1]; (DVI & Dual-Mode DisplayPort compatible[2]) |
||||||||||||||||||||||||||||||||
| OUTPUT 1 – 4 | (4) HDMI Type A connectors, female; HDMI digital video/audio outputs[1]; (DVI compatible[2]) |
||||||||||||||||||||||||||||||||
| SERVICE | (1) USB Type A connector, female; USB 2.0 host port; For firmware update and custom EDID upload via a USB flash drive |
||||||||||||||||||||||||||||||||
| 24VDC 0.75A | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack included |
||||||||||||||||||||||||||||||||
| Controls & Indicators | |||||||||||||||||||||||||||||||||
| PWR | (1) Bi-color LED, indicates operating power is supplied via the power pack; illuminates amber while booting, green when operating | ||||||||||||||||||||||||||||||||
| SETUP | (1) Pushbutton and (1) red LED, restores factory settings | ||||||||||||||||||||||||||||||||
| RESET | (1) Recessed pushbutton for hardware reset | ||||||||||||||||||||||||||||||||
| INPUT | (1) Green LED, indicates video signal presence at the HDMI input | ||||||||||||||||||||||||||||||||
| OUTPUT 1 – 4 | (4) Green LEDs, each indicates video signal transmission at the corresponding HDMI output | ||||||||||||||||||||||||||||||||
| HDCP | (1) 3-position slide switch, selects the HDCP version (OFF, 1.4, or 2.2) | ||||||||||||||||||||||||||||||||
| EDID | (1) 2-position slide switch, selects the EDID mode (DEFAUT or COPY 1ST) | ||||||||||||||||||||||||||||||||
| Power | |||||||||||||||||||||||||||||||||
| Power Pack (included) | Input: 100-240 Volts AC, 50/60 Hz; Output: 0.75 Amps @ 24 Volts DC; Model: PW-2407WU |
||||||||||||||||||||||||||||||||
| Power Consumption | 5.5 W (typical) | ||||||||||||||||||||||||||||||||
| Environmental | |||||||||||||||||||||||||||||||||
| Temperature | 32° to 104° F (0° to 40° C) | ||||||||||||||||||||||||||||||||
| Humidity | 10% to 90% RH (non-condensing) | ||||||||||||||||||||||||||||||||
| Enclosure | |||||||||||||||||||||||||||||||||
| Chassis | Metal, black finish, with (2) integral mounting flanges | ||||||||||||||||||||||||||||||||
| Mounting | Freestanding, surface mount, or attach to a single rack rail | ||||||||||||||||||||||||||||||||
| Dimensions | |||||||||||||||||||||||||||||||||
| Height | 0.87 in (22 mm) | ||||||||||||||||||||||||||||||||
| Width | 8.09 in (206 mm) | ||||||||||||||||||||||||||||||||
| Depth | 4.67 in (119 mm) | ||||||||||||||||||||||||||||||||
| Compliance | |||||||||||||||||||||||||||||||||
| CE, IC, FCC part 15 Class B digital device | |||||||||||||||||||||||||||||||||
Based on 0 reviews
Be the first to review “CRESTRON-HD-DA4-4KZ-E distribution amplifier w/4k60 4.4.4&hdr”
Related products
-
Pro Video, Routers & Switchers
SW4 USB – USB Switcher
Features
- Outputs: Four female USB type A connectors
- USB 2.0 compatible — Supports 480 Mbps high speed communications and is backwards compatible with all prior USB versions.
- Four port output hub with 5V, 500mA available on each output — Allows simultaneous connection to multiple peripheral devices such as mass storage devices, keyboards, mice, or other HID – Human Interface Devices. Attached devices can be powered via the provided 5V, 500mA available on each output.
- Port Status LEDs — Provides visual indication of port activity for enumerated peripherals and all connected and active host devices.
- Multiple control points — Operation via front panel, RS-232, and contact closure offers integration flexibility into a variety of control environments.
- RS-232 pass-through — Reduces RS-232 control port requirements by processing SIS commands within the SW USB while also passing them through to other controllable Extron video switchers.
- Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel.
- Rack-mountable, 1U half rack width metal enclosure
The Extron SW4 USB Plus are four-input USB switchers that allow switching between multiple host devices and multiple USB peripherals. They provide integrator-friendly solutions for implementing USB 2.0 compatible switching in professional AV environments. A number of specialized features help further streamline integration, such as: port status indication, RS-232 pass-through, front panel security lockout, and multiple control points. The SW4 USB Plus model features Host and Peripheral Emulation Mode, which provides “keep alive” functionality by continuously mimicking host and keyboard/mouse communications within the switcher. This emulation eliminates the need for enumeration, and reduces the chance of failed device communications throughout the switching process.
SKU: #0146
There are no reviews yet.