10 in stock
47,230 EGP
10 in stock
The Bosch EVID 6.2T Loudspeakers are perfect for high-quality sound in indoor and outdoor settings. The speaker’s long range and smooth bass provide high sound pressure levels in vast spaces like shopping malls, sports bars, and fitness clubs.
The 6.2’s three-dimensional elliptic baffle positions the 1″ Ti direct radiator high-frequency element symmetrically, with a coherent coverage waveguide in front of and between the 6″ low-frequency drivers.
The LF units are carefully shaped, located, and splayed at 10° to offer coverage control for the resultant line array. Lobing is achieved by physically “shadowing” the LF transducers from each other across the spectrum where they would usually interact.
Bosch EVID 6.2T Loudspeakers mounting solution offers a wider range of shooting angles in horizontal and vertical planes than other models. The curved grille is weather resistant and has a concealed leash for added safety.
The network must incorporate a passive limiter for both low and high frequency transducers.
The loudspeaker system should fulfill the following performance criteria:
The device can handle 300-watts of EIA RS-426A continuous pink noise (6 dB crest factor), has a frequency response of 62 Hz – 20 kHz (-10 dB from rated sensitivity), and a pressure sensitivity of 94 dB at one watt and 200 Hz -10 kHz at one meter.
Impedance: 8 Ohms nominal, 6 Ohms minimum. The high-frequency transducer should drive a waveguide to cover 100° horizontally and 90° vertically.
Check out our Bosch EVID 6.2T Loudspeakers price.
| Active or Passive | |
| Number of Included Speakers | |
| Speaker Configuration | |
| Power Handling | |
| Constant Voltage / Transformer Taps | |
| Impedance | |
| Shielded |
| HF Driver | |
| LF Driver |
| Frequency Range | |
| Maximum SPL | |
| Sensitivity | |
| Coverage Angle | |
| Crossover |
| I/O |
| Environmental Protection |
| Color | |
| Rotation Range | |
| Construction Material | |
| Dimensions | |
| Weight |
| Package Weight | |
| Box Dimensions (LxWxH) |
LC1-UM12E8 ceiling loudspeaker, 12 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
Numerous ceiling situations are suitable for the LC1 Modular Ceiling Loudspeaker series. They offer top-notch music and voice for indoor public address applications. There are five loudspeakers in the range, each with a unique opening angle, input power, and sound reproduction.
The LC1-MFD or LC1-MFDS enclosure may be used to mount the loudspeaker, which are appropriate for usage in areas where air is handled. The DC-blocking board PM1-LISD and optional monitoring board PRA-EOL can be mounted within the enclosure of the loudspeaker frame.
Check out the LC1 ceiling loudspeaker price.
Voice alarm loudspeakers are made expressly to be used in buildings where rules control the verbal evacuation notification system’s functioning. The LC1 Modular Ceiling Loudspeaker series complies with British standard BS 5839–8 and is approved EN 54–24 for use in voice alarm systems.
Buy LC1 Ceiling loudspeaker, 12W from OmniSignals now!
In order to prevent connected circuit failure due to fire damage to the loudspeaker, the loudspeaker is equipped with built-in protection. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeaker in other locations.
To further strengthen the safety of the cable termination, the LC1-UM12E8 ceiling loudspeaker can also be utilized in conjunction with a metal fire-dome.
The LC1-UM12E8 ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
The LC1 ceiling loudspeaker coaxial range is designed with ease of installation in mind, ensuring a user-friendly experience for seamless integration into diverse environments. The loudspeaker consists of a frame with the loudspeaker driver and metal or ABS grille with integrated light conductor, matching transformer and ceramic screw terminal connection block.
On the loudspeaker are provisions for mounting the optional end-of-line surveillance board and optional DC-blocking board. Power tapping on the 70 V / 100 V matching transformer allows selection of full-power, half power, quarter-power and eight-power radiation.
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
Elevate your audio experience with the Bosch PLE-1MA030 Plena Mixer Amplifier, a powerhouse of versatility designed for background audio PA and commercial audio installations. This compact yet robust amplifier delivers 30 watts of power, ensuring your message is heard loud and clear in retail stores, commercial offices, halls, and beyond. Its straightforward interface makes operation a breeze for users of all skill levels, allowing you to focus on delivering your content seamlessly.
The Bosch PLE-1MA030 stands out with its tabletop form factor, fitting seamlessly into any setup. It supports four channels and offers a comprehensive frequency response from 50 Hz to 20 kHz +1/-3 dB at rated power, ensuring high-quality sound reproduction across a broad audio spectrum. With less than 1% distortion at rated power, this amplifier guarantees crystal-clear sound for all your PA needs.
Designed for efficiency, the amplifier operates on 230 VAC, 50/60 Hz, with a modest power consumption of 100 VA and a current consumption of 4.5 A. This makes the PLE-1MA030 powerful and economical to run, ideal for installations where the amplifier will be in use for extended periods.
Coming in a package that weighs 17.05 lb with dimensions of 22.6 x 14.2 x 9 inches, this amplifier is as sturdy as it is functional. It promises an easy installation process, fitting effortlessly into your existing audio setup, and its durable construction ensures it can withstand the rigors of daily use.
The Bosch PLE-1MA030 Plena Mixer Amplifier is the cost-effective, ideal solution for enhancing audio communications in a variety of settings. Its blend of functionality, ease of use, and performance make it a valuable addition to any commercial space looking to improve its audio system. Whether for announcements, background music, or paging applications, this amplifier delivers reliable, high-quality sound that meets the demands of professional audio installations.
The robust aluminum waterproof enclosure of the Bosch LA1‑UMx0E‑1 20 Watt Metal Column Loudspeakers 20watt power. The speakers reproduce background music effectively and offer a high degree of voice intelligibility. The speakers come complete with an installation guide and a swivel wall mount bracket.
Check out our column speaker 20Watt price.
Heat-resistant, high-temperature wire, a thermal fuse, and a ceramic terminal block are all included in the loudspeaker columns. The optional line/loudspeaker supervision board can be mounted internally in the column thanks to this feature.
The matching transformer that is built-in has four main taps. To enable basic output power setting, the built-in transformer for the speakers is coupled to a rotating variable-tap switch at the rear of the enclosure. Also included on the rotary vary-tap switch is an 8 ohm option.
Voice alarm loudspeakers are made expressly to be used in situations where governmental restrictions govern the operation of public address systems. For voice alarm systems, the LA1-UM20E-1 and LA1-UM40E-1 are intended. Buy Bosch column loudspeakers 20Watt from our store.
In the case of a fire, the built-in protection in both loudspeaker columns will prevent the associated circuit from failing. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
There are no reviews yet.