10 in stock
24,135 EGP 28,395 EGP
10 in stock
For both indoor and outdoor applications needing high-quality sound, the Evid white is an incredibly small full range loudspeaker that is perfect. When used in background or foreground music systems for dining establishments, bars, patios, retail spaces, and other settings, its size and form make it almost undetectable.
With a coherent coverage waveguide in front of and between the 4″ low frequency drivers, the 4.2’s three-dimensional elliptic baffle symmetrically positions the 1″ Ti high frequency element. Coverage is controlled by the resultant line array thanks to the precise positioning, shape, and 10° splaying of the lf units.
To control lobing, the LF transducers are physically “shadowed” from one another throughout the spectrum where interference would typically occur. More targeting angles in both horizontal and vertical planes are available with the Evid 4.2 speakers mounting system than with other kinds. In addition to a concealed leash for safety, the curving grille has built-in weather protection.
Both the high frequency and low frequency transducers in the network must have a passive limiter.
The following performance requirements must be fulfilled by the Evid white loudspeaker system:
See Bosch EVID 4.2T Loudspeakers price.
| Active or Passive | |
| Frequency Response | |
| Power Capacity | |
| Maximum Sound Pressure Level (SPL) | |
| Nominal Sensitivity | |
| Impedance | |
| Power Taps | |
| Coverage | |
| Crossover | |
| Shielded | |
| Low Frequency Driver | |
| High Frequency Driver | |
| Enclosure Material | |
| Input Connections | |
| Environmental | |
| Dimensions | |
| Weight | |
| Specialties |
| Package Weight | |
| Box Dimensions (LxWxH) |
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
The LC2-PC30G6-8 Ceiling loudspeaker is a 8‑inch two‑way Premium‑sound Ceiling Loudspeaker which provides; wide dispersion, high efficiency, high maximum output, ease‑of‑installation, and wide‑range reproduction of music and voice.
It consists of a baffle assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
The rear enclosure provides an optimum internal volume for extended low frequency performance. The loudspeaker utilizes a second order crossover network at 3.3 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The LC2-PC30G6-8 Ceiling loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
The LC2-PC30G6-8 Ceiling loudspeaker is secured in ceilings using four integral toggle anchors, and has been designed to work together in a wide range of different ceiling constructions.
A tile bridge / C‑ring is included for safe suspension in a drop ceiling that uses mineral wool, or other fiber‑based ceiling tiles from 4 to 25 mm (0.16 to 1.0 in.) thick. A circular template for marking a 272 mm (10.75 in.) diameter hole is included with the loudspeaker.
Check out LC2 Ceiling loudspeaker Price.
The LC2 Ceiling loudspeaker Pair has a three‑way emergency compliant ceramic terminal block with screw connections (including earth) suitable for loop‑through wiring.
Four 100 V, and five 70 V, primary taps are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power, eighth‑power radiation (in 3 dB steps) and eight ohm. Selection is done via a convenient switch on the front baffle.
Buy LC2 Ceiling loudspeaker, 30W from OmniSignals now!
High-efficiency Bosch LBC Horn Loudspeaker 35W offers superior sound dispersion and speech reproduction for a variety of outdoor applications. They are perfect for industries, parks, swimming pools, sports fields, and exhibition spaces.
The LBC 3483/00 complies with emergency requirements and is intended for usage in voice alarm systems.In the case of a fire, the built-in protection of the horn loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations. The Horn loudspeaker boasts heat-resistant, high-temperature wire, a ceramic terminal block, and a thermal fuse.
We offer all Bosch LBC Horn Loudspeaker parts.
Self-extinguishing ABS is used to make the horn’s rear cover (according to class UL 94 V0). The connecting cable exits the back cover through a cable gland (PG 13.5). The back cover has a second hole installed for a loop through connection (covered as usual provided).
These integrated horns may also be installed with any combination of horn and driver because they are available as separate horn and driver. Refer to the order details for the type numbers.
Buy Bosch LBC Horn Loudspeaker from OmniSignals now!
Bosch LBC Horn Loudspeaker 35W is made to meet IEC 268-5 Power Handling Capacity (PHC) regulations, which require them to be able to operate at full power for 100 hours. Bosch has furthermore created the Simulated Acoustical Feedback Exposure (SAFE) test to show that, for brief periods of time, they can tolerate two times the power that is rated for them.
This guarantees increased dependability in harsh environments, resulting in increased customer satisfaction, an extended operational life, and a far lower likelihood of failure or performance degradation.
Check out Bosch LBC Horn Loudspeaker 35W price.
LC1-UM24E8 ceiling loudspeaker, 24 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
The LC1 ceiling loudspeaker coaxial range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
The LC1-UM24E8 ceiling loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
Buy LC1 Ceiling loudspeaker, 24W from OmniSignals now!
Voice alarm loudspeakers are specifically designed for use in buildings where system performance for verbal evacuation announcements is governed by regulations. The LC1 Modular Ceiling Loudspeaker range is designed for use in voice alarm systems and is EN 54‑24 certified and compliant with British standard BS 5839‑8.
The LC1-UM24E8 has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
The LC1-UM24E8 Ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Check out our LC1 Ceiling Loudspeaker Price.
There are no reviews yet.