10 in stock
42,845 EGP
10 in stock
This LBC Line Array 3210/00 Loudspeaker is capable of handling big (reverberant) interior situations such as train stations, airport departure lounges, and convention sites due to its high power output and good directivity. It can also be used outside, like at stadiums for sports or train stations. It is perfect for voice and music reproduction because to its complete frequency range.
The speaker’s ability to handle natural and medium communications, coupled with Audac technology, showcases its capability in delivering superb sound quality. With a competitive price, this product excels in handling diverse applications.
The Bosch LBC Line Array 3210/00 Loudspeaker is the epitome of excellence, offering a harmonious blend of cutting-edge technology, security, and highly suppressed drivers for an unparalleled audio experience.
Check LBC Line Array 3210/00 Loudspeaker price.
Less narrow ‘beaming’ of higher tones occurs because the enhanced filtering creates bigger vertical opening angles for high frequencies. This line array has a more consistent opening angle throughout all key frequencies when compared to traditional column loudspeakers. For instance, the vertical opening angle is still 18° at 4 kHz.
Installation is made simpler by more consistent vertical opening angles since a larger coverage area means that loudspeaker location is less important. With a superior horizontal opening angle of 90° at 4 kHz, a single loudspeaker can reproduce genuine sound across a large listening area.
Buy Bosch Indoor/Outdoor Loudspeaker from OmniSignals now!
Every traditional column loudspeaker emits many unwelcome side lobes in addition to the primary, listener-facing lobe of sound.
The LBC Line Array 3210/00 Loudspeaker produces significantly cleaner, less “colored” sound, even up near to the loudspeakers, because of its strongly suppressed side lobes in the vertical plane, which are normally at least 10 dB from the 250 Hz octave band at 90°. This results in excellent voice and music intelligibility from the line array speakers.
| Total Power Capacity |
| Frequency Range | |
| Maximum SPL | |
| Coverage Angle | |
| I/O Impedance |
| Audio I/O |
| Construction Material | |
| Operating Temperature | |
| Storage Temperature | |
| Operating Humidity | |
| Dimensions | |
| Weight |
The Bosch column loudspeakers 40Watt is a public address system and one of the best column loudspeakers presented by Bosch. The design ensures clear speech and reproduction in both indoor and outdoor environments.
Public spaces including train stations, airports, industries, sports stadiums, and more may employ this paradigm. Long-term installations may be assured of dependability and longevity due to the sturdy construction.
Frequency Response: Usually made to reproduce high-quality music and allow for understandable speaking. Typically, the precise frequency range would be in the few hundreds of Hz to several kHz range.
Acoustic Design: Multiple drivers placed vertically are a common characteristic of column loudspeakers such as the LA1-UM40E-1. This arrangement helps to achieve a more regulated vertical sound dispersion while covering a broad horizontal area. This design improves speech intelligibility in reverberant spaces by reducing sound reflections from floors and ceilings.
Buy Bosch Column Loudspeakers 40Watt from our store now!
See our column speaker 40Watt prices.
It is possible to provide even coverage in a large indoor area, such as an airport terminal, by strategically placing many Bosch column loudspeakers 40watt. Their targeted sound dispersal makes announcements more understandable and clear even in loud, echoing spaces. The waterproof structure guarantees dependable operation in a range of weather situations for outdoor applications.
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
An affordable flush-mounting ceiling loudspeaker for general-purpose use is the LBC 3087/41. This full-range loudspeaker is used in retail establishments, department stores, restaurants, offices, sports arenas, hotels, and shops to reproduce speech and music.
A single-piece, 6 W, dual-cone loudspeaker powers the LBC 3087/41. On the rear of the frame is a matching transformer with a voltage of 100 V. The front features an integrated circular metal grille that is painted in a subtle white hue (RAL 9010).
In the case of a fire, the built-in protection in the loudspeaker prevents the circuit to which it is attached from failing due to loudspeaker damage.
The assembly is quickly installed into a hole in the ceiling cavity and secured with three white-colored screws (supplied). A circular template for marking a 165 mm (6.5 in) diameter hole is included with the loudspeaker.
Buy LBC Ceiling loudspeaker 6W now!
The LBC Ceiling loudspeaker has a three-way terminal block with screw connections suitable for loop-through wiring. Four primary taps are provided on the matching transformer to allow selection of nominal full-power, half-power, quarter-power or eighth power radiation (i.e. in 3 dB steps).
Check out LBC Ceiling loudspeaker Price.
During a fire, the ceiling cavity in which loudspeakers are installed can allow flames to spread throughout a building. To prevent fire entering the caving via the loudspeaker, the ceiling loudspeaker can be fitted with a protective steel fire dome (LBC 3080/01). This optional fire dome is mounted on the loudspeaker assembly using four self-tapping screws, supplied as standard. There are four knock-out holes; two (2) for rubber grommets (supplied) and two (2) for cable glands. (PG13).
See LBC Ceiling loudspeaker.
LC1-UM24E8 ceiling loudspeaker, 24 W, integrated circular metal grille, 6-inch coax (two-way system) driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
The LC1 ceiling loudspeaker coaxial range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
The LC1-UM24E8 ceiling loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
Buy LC1 Ceiling loudspeaker, 24W from OmniSignals now!
Voice alarm loudspeakers are specifically designed for use in buildings where system performance for verbal evacuation announcements is governed by regulations. The LC1 Modular Ceiling Loudspeaker range is designed for use in voice alarm systems and is EN 54‑24 certified and compliant with British standard BS 5839‑8.
The LC1-UM24E8 has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
The LC1-UM24E8 Ceiling loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Check out our LC1 Ceiling Loudspeaker Price.
There are no reviews yet.