Loudspeakers, Pro Audio
Compare
LC2-PC60G6-8H – Ceiling loudspeaker, 60W, 8″, high
Availability:
10 in stock
32,035 EGP
10 in stock
The LC2-PC60G6-8H Ceiling loudspeaker with an 8‑inch two‑way Premium‑sound. It provides wide dispersion, high efficiency, high maximum output, ease‑of‑installation, innovative dual waveguide that provides directivity control to 1 kHz and wide‑range reproduction of music and voice.
Key Features
- 8‑inch coaxial two‑way with dual integrated waveguides
- Waveguide coupled Ti tweeter
- Full bandwidth overload protection
- Front baffle wattage tap adjustment
- BS 5839‑8 and EN 60849 compliant
It consists of a baffle/waveguide assembly, grille, back‑can enclosure, 8‑inch coax two‑way loudspeaker and internal output‑power matching transformer. The loudspeaker features a waveguide coupled with a titanium coated dome tweeter.
It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. The rear enclosure provides an optimum internal volume for extended low frequency performance.
The LC2-PC60G6-8H Ceiling loudspeaker utilizes a second order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels.
The loudspeaker can be installed optionally with the LC2‑PC60G6‑10 ceiling subwoofer to enhance the low frequency reproduction down to 45 Hz.
Installing
Four inbuilt toggle anchors are used to fasten the loudspeaker to ceilings, and it is made to function with a variety of ceiling configurations.
For safe suspension in a drop ceiling with mineral wool or other fiber-based ceiling tiles ranging in thickness from 4 to 25 mm (0.16 to 1.0 in.), a tile bridge or C-ring is incorporated.
With the LC2-PC60G6-8H Ceiling loudspeaker comes a circular template for marking a hole with a diameter of 322 mm (12.625 in.).
Check out LC2 Ceiling loudspeaker Price.
Power configuration
The LC2 Ceiling loudspeaker high contains a ceramic terminal block that is three-way emergency compatible and has screw connections (including earth) that may be used with loop-through wire.
The matching transformer has three 100 V and four 70 V main taps that allow you to pick nominal full power, half power, quarter power, eighth power radiation (in three dB increments), and eight ohm. Convenient switch on the front baffle is used for selection.
Buy LC2 Ceiling loudspeaker, 60W from OmniSignals now!
Related products
-
Pro Audio, Loudspeakers
LC5-WC06E4 – Ceiling loudspeaker, 6W, ABS, 2″
The LC5-WC06E4 Ceiling loudspeaker is an extreme compact ceiling loudspeaker, suitable for speech and background music reproduction.
Key Features
- Suitable for speech and music reproduction
- Extreme compact size
- Suitable for use in humidity-, chlorine- and salty environments
- Selectable 70 V ,100 V and 8 Ohm input
- EN 54‑24 certified
Design
The design of the front grille perfectly matches with current available recessed luminaires, integrating light and sound.
The optional back‑box LC5‑CBB fully protects the rear of the loudspeaker from dust and dripping water from above, making the combination IP 44 protected.
The loudspeaker frame, grille and back‑box are manufactured from self‑extinguishing ABS according to UL 94 V 0.
Usage
This LC5-WC06E4 Ceiling loudspeaker is suitable for use in low ceiling applications with low noise level. The small driver used in the unit stands for delivering good sound quality from a small sized unit and provides a wide opening angle for the important frequency octaves.
Fewer loudspeakers are needed to cover a given area, and the noticeable “fading” that occurs as a listener walks from one loudspeaker to another area is eliminated.
The LC5 Ceiling loudspeaker ABS, 2 (with an assembled back‑box) is suitable for use in humidity-, chlorine- and salty environments.
See our LC5 Ceiling loudspeaker Price.
Installation
Installation is easy with two integral leaf springs that securely hold the loudspeaker in its cut‑out. The integral leaf springs can be adjusted in three positions to accommodate ceiling thicknesses from 5 mm to 25 mm.
The size of the ceiling cut‑out opening is standardized on available 3” (76.2 mm) cutting hole saws. No tool required for fitting the loudspeaker into the ceiling cut‑out.
The loudspeaker has built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected.
In this way, system integrity is maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation.
The LC5-WC06E4 Ceiling loudspeaker has ceramic screw‑terminal connection blocks, thermal fuse and heat-resistant high temperature wiring.
Buy LC5 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0018 -
Pro Audio, Loudspeakers
LC3-UC06E – Ceiling loudspeaker, 6W, spring arms
The LC3-UC06E Ceiling loudspeaker is a general purpose, cost-effective 6 W ceiling loudspeaker, suitable for 100 V connection with power tapping of: 6, 3, 1.5 and 0.75 Watt.
Key Features
- Suitable for speech and music reproduction
- Lightweight ABS material
- Easy to install
- Unobtrusive design
- EN 54‑24 certified
The optional back‑box LC3‑CBB fully protects the loudspeaker from dust and dripping water from above, according IP21C. The LC3 Ceiling loudspeaker spring arms, frame, grill and back‑box are manufactured from self‑extinguishing ABS according to UL 94V0.
Check out LC3 Ceiling loudspeaker Price.
Installation and Setup
With built-in spring arms that firmly hold the LC3-UC06E Ceiling loudspeaker in its cut-out, installation is simple. Ceilings ranging in thickness from 5 to 25 mm are compatible. Additionally, a template for precisely outlining the cut-out in ceiling panels is given.
The LC3-UC06E Ceiling loudspeaker is equipped with built-in protection to make sure that damage to it during a fire doesn’t cause the circuit to which it is connected to fail. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
The loudspeaker is equipped with heat-resistant high temperature wire, a thermal fuse, and a ceramic screw-terminal connecting block. holes (11 mm) for two cable glands (20.5 mm) and two rubber grommets (standard provided).
Four primary taps for 100 V are provided on the matching transformer to allow selection of nominal full‑power, half‑power, quarter‑power and one‑eighth‑power.
The optional back‑box (LC3‑CBB) protects the rear of the loudspeaker from dust, falling objects, makes the unit vermin proof and prevents sound traveling via the ceiling cavity to adjacent areas.
The back‑box is assembled with the loudspeaker by means of a snap‑in construction and has knock‑out holes (11 mm) for two rubber grommets (standard supplied) and for two cable glands (20.5 mm).
Buy LC3 Ceiling loudspeaker, 6W from OmniSignals now!
SKU: #0022 -
Pro Audio, Loudspeakers
LC1-UM06E8 – Ceiling loudspeaker, 6W, metal
The LC1-UM06E8 Ceiling loudspeaker range can be used for a wide variety of ceiling environments. They provide excellent speech and music in indoor public address applications. The range offers a choice of five loudspeakers distinguished by input power, opening angle and sound reproduction.
Key Features
- Excellent speech and music reproduction
- Easy installation with one grille size and one complete set of accessories
- Choice of different ceiling mounting methods
- Optional Pilot Tone indication
- EN 54‑24, UL2043, UL1480 certified
Protection
The LC1-UM06E8 Ceiling loudspeaker has built-in protection to ensure that fire damage to the loudspeakers does not cause failure of the connected circuit. In this way system integrity is maintained, ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeakers can also be used in combination with a metal fire-dome to increase protection of the cable termination.
Check out the LC1 ceiling loudspeaker price.
Connections
The loudspeaker has a ceramic screw-terminal connection block, thermal fuse and heat-resistant, high-temperature wiring.
Buy LC1 ceiling loudspeaker, 6W now!
More Information
Ceiling loudspeaker, 6 W, integrated circular metal grille, 6-inch driver, without flush ceiling-mounting accessory, EN54-24 certified, white RAL 9010.
The loudspeaker can be installed with the LC1-MFD or LC1-MFDS enclosure and are suitable for use in air-handling spaces. The loudspeaker frame includes provision for mounting the optional monitoring board PRA-EOL and DC-blocking board PM1-LISD inside the enclosure.
See our LC1 ceiling loudspeaker metal.
SKU: #0019 -
Pro Audio, Loudspeakers
Bosch LA1UMx0E1 20 watt Metal Column Loudspeakers
The robust aluminum waterproof enclosure of the Bosch LA1‑UMx0E‑1 20 Watt Metal Column Loudspeakers 20watt power. The speakers reproduce background music effectively and offer a high degree of voice intelligibility. The speakers come complete with an installation guide and a swivel wall mount bracket.
Bosch Column Loudspeakers 20Watt Overview
- Reproduction of background music and clear speech
- In situations when directivity is crucial
- Weatherproof design that is slimline
- Wall-mounting bracket with swivel included as standard
- Robust aluminum construction
- Ability to switch between 8 Ohms and a 70/100 V line
- Provision for the optional line/loudspeaker supervision board can be mounted inside.
- EN 54‑24 certified
- BS 5839‑8 and EN 60849 compliant
Check out our column speaker 20Watt price.
Connections and security
Heat-resistant, high-temperature wire, a thermal fuse, and a ceramic terminal block are all included in the loudspeaker columns. The optional line/loudspeaker supervision board can be mounted internally in the column thanks to this feature.
Loudspeaker power output configuration
The matching transformer that is built-in has four main taps. To enable basic output power setting, the built-in transformer for the speakers is coupled to a rotating variable-tap switch at the rear of the enclosure. Also included on the rotary vary-tap switch is an 8 ohm option.
Alert voice
Voice alarm loudspeakers are made expressly to be used in situations where governmental restrictions govern the operation of public address systems. For voice alarm systems, the LA1-UM20E-1 and LA1-UM40E-1 are intended. Buy Bosch column loudspeakers 20Watt from our store.
Protection
In the case of a fire, the built-in protection in both loudspeaker columns will prevent the associated circuit from failing. System integrity is preserved in this way, guaranteeing that people can still hear announcements via loudspeakers in other locations.
SKU: #0023
There are no reviews yet.